PDA

View Full Version : b20b/type r


pinedo88
02-17-2010, 12:16 PM
i have a b20b block for sale with i dont care what pistons stock b20 rods. along with the oil pan and some parts.. has a spun rod have no use for a dohc so anybody interested im asking 200 or trade for some d16z6 turbo parts.. 770 530 1170 call or text anytime.
james497
02-17-2010, 12:37 PM
bump glws
smrlsvtec
02-17-2010, 01:06 PM
b20=84mm
type r pistons=81mm

correct me if im wrong...
omidzahedian
02-17-2010, 01:13 PM
b20=84mm
type r pistons=81mm

correct me if im wrong...


you are correct, hes just a noob!
CeOTiO8
02-17-2010, 01:17 PM
you are correct, hes just a noob!

I was thinking the same thing.... Might be a :ninja:
jadakid88
02-17-2010, 02:03 PM
or he could have aftermarket pistons with type r comp ratio...
marcos713
02-17-2010, 02:59 PM
or he could have aftermarket pistons with type r comp ratio...

could be....
cprtyler
02-17-2010, 04:23 PM
pmd
jap_racer1
02-17-2010, 04:38 PM
i s a jdmb20baically usdm b20z but still no different since i changed the pistons the crank was turned 10 over already with stock rods and acl bearings the pistons are ycp type r replicas the motor had 1500 on it i drove it on a basemap with 450cc injectors because i needed a car and gas was getting to the bottom end and it ate up the bearings causing it to spin a bearing i changed the oil before i put it on the dyno for a proper tune and it was too late when i left it started knocking pulled over and had it towed from there i am trying to get my block back but as it goes first come first server
pinedo88
02-18-2010, 10:31 AM
up.
jdm eg6
02-18-2010, 12:39 PM
are the type r pistons still in good condition..lmk im interested
pinedo88
02-18-2010, 03:26 PM
are the type r pistons still in good condition..lmk im interested
yea they sure are
pinedo88
02-21-2010, 06:55 PM
ttt
pinedo88
02-23-2010, 04:04 PM
ttt.
punkr6
02-23-2010, 07:59 PM
b20=84mm
type r pistons=81mm

correct me if im wrong...

you are correct, OP needs to revise this thread...
bigdare23
02-23-2010, 08:08 PM
you are correct, OP needs to revise this thread...

RS Machine and YCP make ITR style pistons in 84mm, 84.5mm, and 85mm, So more than likely he's talking about those pistons and not actual ITR pistons. :goodjob:
pinedo88
02-25-2010, 12:03 AM
bump
89vtec'd
02-27-2010, 10:41 AM
price drop?
pinedo88
03-01-2010, 03:23 PM
ttt
jap_racer1
03-01-2010, 09:25 PM
RS Machine and YCP make ITR style pistons in 84mm, 84.5mm, and 85mm, So more than likely he's talking about those pistons and not actual ITR pistons. :goodjob:


if everyone would read the posts its my old block!!

im broke or i would buy it back
TopNotchEG9
03-02-2010, 03:03 AM
pm sent...
pinedo88
03-03-2010, 02:52 PM
ttt
pinedo88
03-07-2010, 10:12 AM
ttt
pinedo88
03-08-2010, 02:06 PM
ttt
pinedo88
03-10-2010, 04:39 PM
ttt
MrTurboCivic
03-10-2010, 10:34 PM
pm me ur lowest price or some trade
pinedo88
03-12-2010, 04:22 PM
ttt
pinedo88
03-14-2010, 04:49 PM
ttt