one11racing
02-03-2010, 08:48 PM
I have a couple of car audio items that have really never been used That I need to get rid of to get my new project running. Email i the best and fastest way to get me. Email is [email protected] .all prices or best offer. I am located in braselton but can come down to buford or gwinnett often an can meet. Thanks for looking.
First is an Polk audio/ Momo 4 channel amp asking $100:
this amp has never been hooked up to power or installed.
Model # c400.4
Specs:
Power
Channels 4/3/2 (bridgeable)
Total Dynamic Power (all ch. driven) 975 watts
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 75 watts x 4
2 Ohms 100 watts x 4
14.4 Volts RMS Bridged
4 Ohms 200 watts x 2
Electrical
Signal-to-noise (Referenced to rated power) > 105 dBA
Remote Gain 0 to -30dB
Input Impedance > 10k Ohms
Output Impedance < 0.02 Ohms
Overall Frequency Response (-3 dB Points) < 10Hz to 45kHz
Protection circuitry Power and ground reversal, Thermal and Short, Current Overdraw and Low Impedance Protection with auto stand-by mode
Dimensions
Overall Dimensions (with panels) 2-1/2" H x 16" W x 9-3/4" D
(6.35cm H x 40.64cm W x 24.77cm D)
Overall Dimensions (without panels) 2-1/2" H x 15-1/2" W x 9-3/4" D
(6.35cm H x 39.37cm W x 24.77cm D)
Product Weight 13.50 lbs.
Total Shipping Weight 15.00 lbs.
Filter Settings
Subsonic Filter 24dB/Octave @ 15Hz
High Pass Filter frequency adjustable 50Hz - 5kHz
High Pass Filter slope 12db/oct. or 24dB/oct.
Low Pass Filter frequency adjustable 50Hz - 5kHz
Low Pass Filter slope 12db/oct. or 24dB/oct
Second a pair of Kicker com 5 1/4 inch Components $100:
These were only installed for 2 weeks. I Believe I have all accessories including carrying case.
model #: ss56.2
Speaker Size : 6" mounting size 5.25"
Tweeter Size : 2-5/16"
Crossover Size : 5-5/8"
Design : 2-Way Component System
Power Handling (RMS) : 90 Watts
Power Handling (MAX) : 180 Watts
Power Handling (Combined) MAX : 360 Watts
Sensitivity : 86dB
Frequency Response : 50Hz~22kHz
Impedance : 4-Ohms
Mounting Depth : 2-11/16"
Approximate Weight : 18 LBS
Third Polk DB10 sub $30:
Model db104
specs:
Overall Frequency Response 28-200
Nominal Impedance 4 ohms
Power Handling (continuous) 270 w
Power Handling (peak) 540 w
Efficiency 86 dB
Voice Coil Diameter: Driver 2" (5.08cm)
Last 7" slim drop down $35 (comes with fm mod also):
Model : lfm-705ir Luxma
Specs:
Product Information on model: LFM-705IR, a 7" roof mount TFT, widescreen LCD monitor. This newest model offers a weight unit of 3 lbs. Features excellent quality control, full function wireless capability. It includes a 2 RCA jack for video inputs and an extra IR for any wireless headphone connections. It's designed with all the current technologies in the mobile video market, and sure to meet your expectations
First is an Polk audio/ Momo 4 channel amp asking $100:
this amp has never been hooked up to power or installed.
Model # c400.4
Specs:
Power
Channels 4/3/2 (bridgeable)
Total Dynamic Power (all ch. driven) 975 watts
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 75 watts x 4
2 Ohms 100 watts x 4
14.4 Volts RMS Bridged
4 Ohms 200 watts x 2
Electrical
Signal-to-noise (Referenced to rated power) > 105 dBA
Remote Gain 0 to -30dB
Input Impedance > 10k Ohms
Output Impedance < 0.02 Ohms
Overall Frequency Response (-3 dB Points) < 10Hz to 45kHz
Protection circuitry Power and ground reversal, Thermal and Short, Current Overdraw and Low Impedance Protection with auto stand-by mode
Dimensions
Overall Dimensions (with panels) 2-1/2" H x 16" W x 9-3/4" D
(6.35cm H x 40.64cm W x 24.77cm D)
Overall Dimensions (without panels) 2-1/2" H x 15-1/2" W x 9-3/4" D
(6.35cm H x 39.37cm W x 24.77cm D)
Product Weight 13.50 lbs.
Total Shipping Weight 15.00 lbs.
Filter Settings
Subsonic Filter 24dB/Octave @ 15Hz
High Pass Filter frequency adjustable 50Hz - 5kHz
High Pass Filter slope 12db/oct. or 24dB/oct.
Low Pass Filter frequency adjustable 50Hz - 5kHz
Low Pass Filter slope 12db/oct. or 24dB/oct
Second a pair of Kicker com 5 1/4 inch Components $100:
These were only installed for 2 weeks. I Believe I have all accessories including carrying case.
model #: ss56.2
Speaker Size : 6" mounting size 5.25"
Tweeter Size : 2-5/16"
Crossover Size : 5-5/8"
Design : 2-Way Component System
Power Handling (RMS) : 90 Watts
Power Handling (MAX) : 180 Watts
Power Handling (Combined) MAX : 360 Watts
Sensitivity : 86dB
Frequency Response : 50Hz~22kHz
Impedance : 4-Ohms
Mounting Depth : 2-11/16"
Approximate Weight : 18 LBS
Third Polk DB10 sub $30:
Model db104
specs:
Overall Frequency Response 28-200
Nominal Impedance 4 ohms
Power Handling (continuous) 270 w
Power Handling (peak) 540 w
Efficiency 86 dB
Voice Coil Diameter: Driver 2" (5.08cm)
Last 7" slim drop down $35 (comes with fm mod also):
Model : lfm-705ir Luxma
Specs:
Product Information on model: LFM-705IR, a 7" roof mount TFT, widescreen LCD monitor. This newest model offers a weight unit of 3 lbs. Features excellent quality control, full function wireless capability. It includes a 2 RCA jack for video inputs and an extra IR for any wireless headphone connections. It's designed with all the current technologies in the mobile video market, and sure to meet your expectations