PDA

View Full Version : MSSRACING 2010



SPOOLIN
01-31-2010, 07:52 PM
Blue car has been going through winter changes, car is running now, getting tuned shortly on Ethanol. Trying to go testing sunday so i can get ready for face off.

1st mod, and most important is the Liberty's Gear Box with a Wavetrac Diff. I'm excited to get this thing because i never thought i would have one this soon but i worked out everything to make sure this was on the top of the list. The rest of my pics won't be this crappy, didn't know the photo function on my video camera was THAT BAD!.
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/DSC00005.jpg

got the fuel pump, Aeromotive Pro Pump....700lph ish, depending on how you calculate it, its a lot more (technically 866lph at 43psi) but i calculate at the potential pressure it will pump close to redline.
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1281.jpg

Injectors came too! Injector Dynamics 2200cc SATURATED injectors. No Resistor boxes or injector drivers anymore!
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1283.jpg

Thank You JKOBD ...for pimping my Engine Harness. lol.
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/DSC02103.jpg
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1332.jpg
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1338.jpg
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1334.jpg
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1342.jpg

Rear fuel setup Done...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1354.jpg

Front fuel stuff, Done...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1360.jpg

Firewall Connector, inside car...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1356.jpg

Firewall Connector, engine side
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1358.jpg

smrlsvtec
01-31-2010, 08:02 PM
good stuff!!!

Formally...
01-31-2010, 08:06 PM
Thumbs up to you Matt. Now you can use all that power you make. Post some pics of the other cars also (even though I know what they are).

Also, I guess I need to get busy on my project for 2010.:ninja:

GGPIS3
01-31-2010, 08:07 PM
very nice.

SPOOLIN
01-31-2010, 08:09 PM
Thumbs up to you Matt. Now you can use all that power you make. Post some pics of the other cars also (even though I know what they are).

Also, I guess I need to get busy on my project for 2010.:ninja:

Ill get some pics of them when work continues on them. One is fresh out the body shop today, so it will be a week or so and it will have its fresh heart put in...everything is pretty much here for it except some odd pieces for brakes and fuel, just needs time. It should be in for tuning by the beginning of march im sure. Waiting on Golden Eagle for the other car, we have every single thing for it so it will be the first to be ready besides mine

G.C
01-31-2010, 08:25 PM
just wondering. How much did that cost you?

JJSPEC Racing
01-31-2010, 08:28 PM
Nice man! Hope to see it in action soon!

Dwisforme05
01-31-2010, 08:52 PM
nice man!

-S Double C-
01-31-2010, 08:55 PM
looks good hopefully i can get one someday

Mmmm_Bacon
01-31-2010, 09:03 PM
you finally got it! lol congrats man, and gl should be bad ass!

I wish i never deleted the ol baby blue pictures i had!

SPOOLIN
01-31-2010, 09:38 PM
Liberty's website has prices on it, i don't like to get into how much i spend on this thing. when people ask me, i just don't answer.

Ill be getting a lot done next weekend on the car.

MINI
01-31-2010, 11:44 PM
Daaaaaaamn

ATLTSX
02-01-2010, 08:22 AM
Looks good Matt.

Da_unknown
02-01-2010, 11:50 AM
true that

00CelicaGT
02-01-2010, 12:45 PM
for the people that were curious about the pricing of the gear set

http://www.libertysgears.com/frontwheeldrive.htm

SPOOLIN
02-01-2010, 02:06 PM
I got my new injectors and blingin fuel pump today lol, ill add pics later. Last thing to receive is my engine harness and ill be set for getting everything goin!

boosted_nonv
02-01-2010, 03:48 PM
thats wassup Matt

SPOOLIN
02-01-2010, 10:03 PM
got some moar stuff!

vtecace23
02-01-2010, 10:05 PM
Nice, looking forward to seeing it run this year. Good luck to ya

SPOOLIN
02-01-2010, 10:11 PM
thank you, she was good to me last year, i gotta be good to her over the winter months so she'll keep on puttin out.

Da_unknown
02-01-2010, 10:24 PM
matt going HARD

cpearson
02-02-2010, 12:23 PM
NICE! I'd love to come see her run on the track. Does ZWK ride out with you any?

SPOOLIN
02-02-2010, 02:19 PM
no he does not.

jody754
02-02-2010, 08:48 PM
got that bitch fully buffed tonight and ready to go back together,seibon hatch didnt come the way i expected so having to do a few things to it but will be headed to greenery for fresh goods will post up some pics also got shit laying everywhere

BLK JDM
02-02-2010, 08:53 PM
Good shit!!

SPOOLIN
02-02-2010, 10:28 PM
welded the bell housing reinforcements tonight. good stuff.

Da_unknown
02-02-2010, 10:30 PM
^^yes u did

SPOOLIN
02-03-2010, 07:30 AM
well i just made shit, i didn't do the welding haha .

BABY J
02-03-2010, 07:50 AM
Nice man!!! Now all you need is the 1 part we always discuss and it'll all be just dialing in the combination after that.

MSSRACING FTW - they assembled one of my engines and I couldn't be happier.

And Charles you have already came a long way on your project for this year already... can't wait to see Big Red join forces w/ Lil Red - LOL.

.:Stirfry:.
02-03-2010, 07:55 AM
You must be planning on running e85?

SPOOLIN
02-03-2010, 10:36 AM
Yea I am going to run e85 the system will easily support 900+ on e85 and 1200-1300 on gas with 43 psi base pressure

SPOOLIN
02-14-2010, 03:36 PM
Fuel system going in tonight and tomorrow. Been unable to work on it because valentines day is a VERY busy weekend for my wife so i was taking care of the little one all weekend. Engines harness will be back this week to go in, i gotta GET THIS THING DONE LOL!

Da_unknown
02-14-2010, 03:46 PM
about time

SPOOLIN
02-14-2010, 04:32 PM
I pulled the exhaust off last night, big weight reduction lol, full 4" mild steel exhaust

JJSPEC Racing
02-14-2010, 05:03 PM
I pulled the exhaust off last night, big weight reduction lol, full 4" mild steel exhaust

I can only imagine how much that weighed!

DarKStaR
02-14-2010, 06:49 PM
:ttiwwp:

Lets see some pics!

bloodline
02-14-2010, 07:07 PM
those injectors look expensive

SPOOLIN
02-14-2010, 08:46 PM
those injectors look expensive

Yeah but ill never EVER need another set for this car again. lol.

d16_turbo
02-14-2010, 11:20 PM
those injectors ARE expensive


...

SPOOLIN
02-15-2010, 09:51 AM
engine harness yay.

boosted_nonv
02-15-2010, 06:28 PM
pimp harness for real:goodjob:

SPOOLIN
02-18-2010, 08:44 PM
yes i posted more pics of it before i put it in this weekend. Ill get some actual install pics this weekend in the daytime, ive been working on it in the night time hours lately.

Mmmm_Bacon
02-18-2010, 10:23 PM
your harness looks alot like my harness will when its done lol

SPOOLIN
02-21-2010, 11:20 PM
Trying to get the wiring squared away in the next couple of days...Other stuff is done...Not much longer finally lol.

Rear fuel setup Done...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1354.jpg

Front fuel stuff, Done...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1360.jpg

Firewall Connector, inside car...
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1356.jpg

Firewall Connector, engine side
http://i28.photobucket.com/albums/c203/spoolinmatt/2000%20EK/Third%20Setup/IMG_1358.jpg

JJSPEC Racing
02-22-2010, 04:06 AM
Looking good, man!

Formally...
03-10-2010, 09:42 AM
Updates. Got the Vibrant Vanjen Clamps and new intercooler piping done. Matt blew a coupler off during a burnout in the finals of a race last year and that could have cost him the win. None of that this year with the new clamps.

http://gallery.mainstreamperformance.com/main.php?g2_view=core.DownloadItem&g2_itemId=1185&g2_serialNumber=2

http://gallery.mainstreamperformance.com/main.php?g2_view=core.DownloadItem&g2_itemId=1191&g2_serialNumber=2

http://gallery.mainstreamperformance.com/main.php?g2_view=core.DownloadItem&g2_itemId=1188&g2_serialNumber=2

http://gallery.mainstreamperformance.com/main.php?g2_view=core.DownloadItem&g2_itemId=1194&g2_serialNumber=2

SPOOLIN
03-10-2010, 01:24 PM
yes silicone go bye bye.

WalkS
03-10-2010, 01:34 PM
Awesome! Can't wait to see it at IFO.

SoLJames95
03-10-2010, 01:37 PM
Ya but luckily he still won the race even after he blew the coupker. LOL!!! Good stuff man will see you out there!

SPOOLIN
03-10-2010, 01:40 PM
LOL lets not go there!

Brian*
03-10-2010, 03:10 PM
Damn!

BABY J
03-10-2010, 05:16 PM
Shit sounds slow.

tk4g94
03-10-2010, 06:11 PM
so nice!

jnv255
03-10-2010, 06:42 PM
nice

Da_unknown
03-10-2010, 09:19 PM
:yourock:

SPOOLIN
03-12-2010, 07:41 AM
Got it running last night without to much to trouble shoot. Its so nice to have all wiring that is known to be in grade A condition. Looks like we'll be tuning tonight, if not, then tomorrow afternoon. Gotta go get me a load of E85 lol.

hondalover00
03-12-2010, 08:47 AM
hell yeah

BABY J
03-12-2010, 09:21 AM
11.34 @ 214mph :ninja:

SoLJames95
03-12-2010, 09:22 AM
Got it running last night without to much to trouble shoot. Its so nice to have all wiring that is known to be in grade A condition. Looks like we'll be tuning tonight, if not, then tomorrow afternoon. Gotta go get me a load of E85 lol.


Will the dyno be able to handle this SUPER HONDA????:gay:
We shall see. But im guessing close to the same numbers maybe add a few?

Evil Goat
03-12-2010, 09:41 AM
Got it running last night without to much to trouble shoot. Its so nice to have all wiring that is known to be in grade A condition. Looks like we'll be tuning tonight, if not, then tomorrow afternoon. Gotta go get me a load of E85 lol.

Good stuff! Good luck with it man :goodjob:

DVSRX-7
03-12-2010, 11:28 AM
video update?

SPOOLIN
03-12-2010, 12:15 PM
im not trying to make more power for once, just been upgrading parts and changing fuel.

LokiSays
03-12-2010, 12:28 PM
Wowie that fuel setup is sick!

AFSil80
03-13-2010, 02:52 AM
That harness is a work of art...

SPOOLIN
03-14-2010, 10:56 PM
We tuned tonight finally! We made over 800 on E85 and the engine is loving it. it spools faster than last year by a fair amount. Ive never pulled plugs to check them and they be so clean and that was with fuel in the 7.5:1 air fuel range because i was playing it a little safe. Thanks to Mainstream Performance and Scott Brooks (Digital Box Tuning). Without them it would be extremely hard to do the things that i am able to do. Scotty put in some hours with me through an ignition problem i was having this weekend. the little dip in the graph before peak power is an ignition hiccup which i pretty much have already taken care of. Tuned at 33psi.

110 octane vs E85(Green)
http://www.importatlanta.com/forums/attachment.php?attachmentid=220593&stc=1&d=1268638343

DeeAOne
03-14-2010, 11:12 PM
beast of a car you have. money, money, money... :goodjob:

jody754
03-14-2010, 11:40 PM
give me back that filet 0 fish...

Dwisforme05
03-15-2010, 12:26 AM
damn matt, sick!

boosted_nonv
03-15-2010, 06:34 AM
Eh I guess that's the new low boost huh lol

SPOOLIN
03-16-2010, 07:28 AM
yeah it was 33 psi i could go to 40 but i wont do that until i need it.