Ed
01-28-2010, 04:36 PM
I am doing some research because my escort is throwing a code and I need to get it done ASAP and I came upon this:
http://www.cardealercheck.com/forum/thread5812.html
You grammar nazi's would shit your pants if you were on that forum.
Highlighted a few misspelling errors. Looks like he doesn't know there's a space between a period and the next sentence.
The car runs rough and wants to die half the time while stopped in gear, or moving slowly in gear.Code came on p0171 for bank one lean, changed upstream 02 sensor. Light came on a week later and I took it to Ford because they are the expirts. Ford replaced the MAF sensor, and charged me $500 and stated car could have other probloms. Light came on a week later same code. I checked the vacum found a line that was colapsing replaced line, sprayed carb clean on vacum lines no leaks. Then codes both P1506 (idle air controller overspeed) and P0171 came on about a week later. Took the IAC off cleaned it and the throttle body. Lights for both codes came on again tested ohms of IAC all ok, but I unpluged it when can was running and reved it up and let it idle, pluging and unpluging vale no change in idle occured. Been 2 days since, after clearing codes and start engine engine wants to die, but if you rev it up and let it come to idle runs fine then throws code P1506.Help Please
No words.
transmitoin!haha mine does that im gettin a new trany 2morro
This one is a genius.
its a ford what do u aspect
Discuss.
http://www.cardealercheck.com/forum/thread5812.html
You grammar nazi's would shit your pants if you were on that forum.
Highlighted a few misspelling errors. Looks like he doesn't know there's a space between a period and the next sentence.
The car runs rough and wants to die half the time while stopped in gear, or moving slowly in gear.Code came on p0171 for bank one lean, changed upstream 02 sensor. Light came on a week later and I took it to Ford because they are the expirts. Ford replaced the MAF sensor, and charged me $500 and stated car could have other probloms. Light came on a week later same code. I checked the vacum found a line that was colapsing replaced line, sprayed carb clean on vacum lines no leaks. Then codes both P1506 (idle air controller overspeed) and P0171 came on about a week later. Took the IAC off cleaned it and the throttle body. Lights for both codes came on again tested ohms of IAC all ok, but I unpluged it when can was running and reved it up and let it idle, pluging and unpluging vale no change in idle occured. Been 2 days since, after clearing codes and start engine engine wants to die, but if you rev it up and let it come to idle runs fine then throws code P1506.Help Please
No words.
transmitoin!haha mine does that im gettin a new trany 2morro
This one is a genius.
its a ford what do u aspect
Discuss.