PDA

View Full Version : Adjusting camber bolts on 94' civic....



a94civicex
01-21-2010, 12:58 PM
So when I bought my 94' ej it already had the coilovers system on it.... What I need to know is where are the camber bolts located so I can adjust it on my passenger side because my driver side is negative and my passenger side it positive.... I'm trying to adjust my passenger side so it will toe in like my driver side does.... Where are the bolts located at? And what size is the bolt?

I'm doing this because I want to go lower than I am currently sitting....

Help me out asap....!

Barefoot
01-21-2010, 02:50 PM
take it get an alignment u will never get it right by eye.

a94civicex
01-21-2010, 04:42 PM
well i just lowered it down more and the camber adjusted itself in.... i went down about an 1" to 1-1/2" up front & the rear 1"....

Barefoot
01-21-2010, 04:48 PM
take it get an alignment u will never get it right by eye.
http://www.importatlanta.com/forums/showthread.php?t=256413&highlight=alignment

a94civicex
01-21-2010, 04:57 PM
yeah the alignment was done a few months ago and it was still positive on the passenger side.... i dont think my buddy that did the alignment didnt mess with the camber! its adjusted in now though and rides better than it did!