oversized valves....good? and JE vs CP rings

[marcos713]

:ninja::ninja::D



thanks every1!:goodjob:

[marcos713]

26 views and no responces? c'mon guys i just need a quick yes or no on the valves

[Black4DrEK]

I had some in my B16 awhile ago... I cant really say anything about them tho..

Not sure how much of a difference it made.. Well i actually didnt even know I had them until I bent them.. LOL

:dunno:

[dallasb84]

well its always better to get moar air into the cylinders but i think the cam and timing is wher you start to run into valves touching.....ive seen where engine builders use putty to make sure valve clearances are gravy during builds but i have no useful info on this stuff.....

[marcos713]

^^thanks for input guys. I'm more than likely going to buy the head anyway and if I can't use the valves I'll just part them out.

Any1 have any info on the ring question?

[Black4DrEK]

shit put the head on.. put some more parts on it.. Get the motor "clayed" you will know Exact how much clearance you have.

[tdurr]

^^thanks for input guys. I'm more than likely going to buy the head anyway and if I can't use the valves I'll just part them out.

Any1 have any info on the ring question?

hey we can talk after maff lol i got some info on valves and wut not...

[marcos713]

Any1 else have any useful input?

[Da_unknown]

oversized valves not really need............ cp pistons:goodjob:

[marcos713]

oversized valves not really need............ cp pistons:goodjob:

Yea I was leaning to the CP pistons more, the only thing is they have a lower CR than the JE but its not that much so I don't think it'l make that much of a difference.

O btw omar told me about ur ride, sounds like its gonna be nice :ninja:

[Da_unknown]

:ninja:..... its still in works, should be back soon

[calboi]

i have je pistons but im going with cp rings myself. heard they held up better

[14thecount]

yo pm me i know a guy with a bad ass da that hes bulding by him self and hes going for the 700hp mark he hit over 500hp the first go around out of a non vtec ls b18a1 block but then car hade problems just keep it on the low lol! anyways man pm if interested and i will give you his number and you guys can talk he has better knowledge then anyone i know on here he's a old school cali street racer!

[dallasb84]

yo pm me i know a guy with a bad ass da that hes bulding by him self and hes going for the 700hp mark he hit over 500hp the first go around out of a non vtec ls b18a1 block but then car hade problems just keep it on the low lol! anyways man pm if interested and i will give you his number and you guys can talk he has better knowledge then anyone i know on here he's a old school cali street racer!

lol

[B18c1Turboed]

Oversize valves not needed,unless you going for really high HP. I suggest the Cp pistons, we all run them in our race cars and never had problems with them.

[marcos713]

Oversize valves not needed,unless you going for really high HP. I suggest the Cp pistons, we all run them in our race cars and never had problems with them.

Ok yea I've pretty much decided on CP pistons. Would it be bad to run with oversized valves tho? B/c they come with the head I'm planning to buy.

[Da_unknown]

no it wouldnt be.. if its already in just leave it...