wiring question

[j0natell0]

alright so i have a 96 civic dx with a d16z6 swap, i believe it was a obd1 harness not sure but i do have a conversion plug to obd1. I traded my swap for a obd1 b16 that came out of a DA integra. I was gonna use my harness but some plugs dont plug up and my harness goes through my firewall close to the heater core. His harness has three plugs where its supposed to go through the firewall like my harness. So i just want to use his harness cause mine just seems to not plug up, and dont feel like dealing with headaches. How will i do that? My current harness connects to my head light plug also. Help asap!

[j0natell0]

damn my harnes is one piece, i guess i have to get a 96 civic ex harness and change the dizzy plug and some other plugs around

[NoWAyItZTOMmY]

use a 96-98ex engine harness, obd2 dizzy, injectors, alternator, iacv 3pin. ecu jumper harness to a obd1 vtec ecu and convert to 2pin iacv

or 96-98ex harness. change the connector to obd1 dizzy, injector plugs and jumper harness obd1 vtec ecu

[j0natell0]

thanks i got it now. honda tech :bump:



http://www.honda-tech.com/showthread.php?t=1972711

[j0natell0]

btw, what two sensors are these? i dont have the two plugs or wires that come off my harness for the sensors. His harness does.


http://i62.photobucket.com/albums/h90/jonatell0/DSC02303.jpg



http://i62.photobucket.com/albums/h90/jonatell0/DSC02305.jpg


http://i62.photobucket.com/albums/h90/jonatell0/DSC02306.jpg


^his harness has the two wires with plugs, they look like they were wired into his harness

[j0natell0]

no one?

[NoWAyItZTOMmY]

the one on the mani (white) is IAT
the black one i think is EVAP/Purge solenoid

[j0natell0]

o damn.. how would i wire it up cause my harness doesnt have the two wires that come off it for the two plugs

[Barefoot]

the one on the mani (white) is IAT
the black one i think is EVAP/Purge solenoid
correct

[j0natell0]

how would i wire it up to my harness?