◄Need a tool.....!►

[AnthonyF]

Does anyone have a 21mm Allen? I have a 19 but it's not big enough. it's for my R6 swing arm axle pivot bearing. It's holding me back from droping the bike and removing the engine.

-Ant.

[Black4DrEK]

^ i see what your saying..

There no way a socket will work?

[Patterson]

Does anyone have a 21mm Allen? I have a 19 but it's not big enough. it's for my R6 swing arm axle pivot bearing. It's holding me back from droping the bike and removing the engine.

-Ant.

you can use a bolt head. put two nuts on the bolt and lock them together then use a socket or wrench to back it out. hope this helps

[AnthonyF]

you can use a bolt head. put two nuts on the bolt and lock them together then use a socket or wrench to back it out. hope this helpsFucking awesome. I dont think I have one that size but I will try it out. I found the tool I need on snap-on.com and the Yamaha dealers are closed. Fucking pussies.

+41 for homey.

-Ant.

[Patterson]

Fucking awesome. I dont think I have one that size but I will try it out. I found the tool I need on snap-on.com and the Yamaha dealers are closed. Fucking pussies.

+41 for homey.

-Ant.


ace hardware is where i get mine. i also weld the two nuts together just to make sure they will not back off.

[AnthonyF]

^I just went to my bike. My axle bolt fits kinda loosely. I dont have two nuts to use on it. Going to ace right now. Thanks again for the input!

I don't have a welder at my garage, at my shop I do but I'm not there. :(

-Ant.

[bowdown201]

You need a tool? Look in the mirror

[speedminded]

you can use a bolt head. put two nuts on the bolt and lock them together then use a socket or wrench to back it out. hope this helpsBingo! There's always more than one way to do something. Any hardware or any parts store will have a bolt with a head size of 21mm to 13/16".

[AnthonyF]

BOOM. Got that ish done. Now I just need to put the bike on the ground with the help of another person and figure out my color combo.

-Ant.

[Patterson]

BOOM. Got that ish done. Now I just need to put the bike on the ground with the help of another person and figure out my color combo.

-Ant.

are you droping the motor or removing the swing arm? i just use a jack and ease the motor down then wrestle/man handle it out. but i keep the front in a stand.

[Patterson]

btw i'll rep back when i get to a computer that will let me lol :goodjob:

[AnthonyF]

are you droping the motor or removing the swing arm? i just use a jack and ease the motor down then wrestle/man handle it out. but i keep the front in a stand.I just removed the swing arm and front section. All thats left is the engine and frame. I don't have a jack at my garage. I figured it'd be easier to unbolt it with the engine on the ground then lift the frame.

I am powder coating the frame.

-Ant.

[Patterson]

gotcha. i guess no cherry picker too? lol or even a strap wraped around an i beam/rafter? i've done some crazy shit to get some things done lol hey if it works right?

[AnthonyF]

Check the motorcycle section for more info.

-Ant.

[Tech5]

Does anyone have a 21mm Allen? I have a 19 but it's not big enough. it's for my R6 swing arm axle pivot bearing. It's holding me back from droping the bike and removing the engine.

-Ant.


I made one, I took a crank bolt and cut the stud off so there is only a nut, and then welded it onto a old cheap socket...waaalllaaa

[Tech5]

^ i see what your saying..

There no way a socket will work?

No because its inverted re re

[obd1kenobi]

http://923now.com/files/2009/12/shore.jpg

here's four tools

[Tech5]

sexxxy

[AnthonyF]

Does his tat say Cadillac? lolol FUcking loser.

-Ant.

[Tech5]

cady for gangstas

[egpower904]

jersey shore is a show full of heffers and fail.

that frame should look sick, i would do it and the wheels white :D