rastaintegra
01-07-2010, 10:19 PM
I have a 90 integra with a turbo ls motor. With 8.5:1 srp piston eagle rods balance stock crank. Also stage 2 crower turbo cams double valve springs and titanium retainer. The turbo is a t3/to4e turbo with a 50 ar compressor side, and a 63 ar on turbine side. Exhaust 3 inch down pipe to a 2.5 exhaust. With this setup what manifold should I use. Should I use the stock intake or an aftermarket. Oh also I am shooting for about 310-325 whp.