bluecivic
01-05-2010, 12:05 PM
I'm trying to get out of this hoppy seen i dont have time to fly that much anymore and dont want to waste the good Heli, it need to be in the air not at my fire place. I have not fly this 600 for about 4 months and the total hours of flying is not very much, i say about 2 hours total. I only have one battery for it so i can only fly one fly at a time and 1 or 2 time a week. I have crash (moderate) one time on this heli and 3 times tailstrike (very minor), 2 out of that 3 time is i try to cut some grass (due to low battery so neede to be close to the ground) and get close to the ground and hit the medium size rock and chip the tail blade that is. Currently i fly with belt driven, it is the best way for starter like me, its more forgiven when tailstrike. After all the Heli are in perfect flying condition and tail blade replacement are recommended BUT i can still hover to proof is still in a healthy condition. This is not a normal toy so take precaution when flying one of this thing and becareful flying near people. Finally please read the list carefully. Call Nam (404)547-0290
1. Align Trex 600 Combo kits (will not sperate them) $1000
- Align Trex 600 with 1 motor baterry and 1 receiver battery. Running Align DS610 cyclic servos and DS620 tail servo
- Specktrum DX7 SE radio
- Pair Radix (Curtis Youndblood) Main blade ($90 alone and only 1 fly on this blade)
- Pair D3 Main Blade (practice blade and its brand new)
- 1 Flybar rod
- 1 Main Shaft
- 2 Feathing/Spinder Shaft
- 1 Torque tube (for tube driven conversion)
- 1 Torque drive tail housing (for tube driven conversion)
- 2 front unbrella gear with housing (for tube driven conversion)
- 3 Front drive gear (for tube driven conversion)
- 1 umbrella gear (for tube driven conversion)
- 1 Main gear
- 1 White landing shid
- Few large and small bearings.
2. Hyperion EOS0610i Dou II charger with power supply (will not seperate) $300
3. If you need extra tools $50
IF you want to buy who ever want to buy everything here then i can do it $1200 even.
http://s385.photobucket.com/albums/oo299/BlackRB/Trex%20600/
1. Align Trex 600 Combo kits (will not sperate them) $1000
- Align Trex 600 with 1 motor baterry and 1 receiver battery. Running Align DS610 cyclic servos and DS620 tail servo
- Specktrum DX7 SE radio
- Pair Radix (Curtis Youndblood) Main blade ($90 alone and only 1 fly on this blade)
- Pair D3 Main Blade (practice blade and its brand new)
- 1 Flybar rod
- 1 Main Shaft
- 2 Feathing/Spinder Shaft
- 1 Torque tube (for tube driven conversion)
- 1 Torque drive tail housing (for tube driven conversion)
- 2 front unbrella gear with housing (for tube driven conversion)
- 3 Front drive gear (for tube driven conversion)
- 1 umbrella gear (for tube driven conversion)
- 1 Main gear
- 1 White landing shid
- Few large and small bearings.
2. Hyperion EOS0610i Dou II charger with power supply (will not seperate) $300
3. If you need extra tools $50
IF you want to buy who ever want to buy everything here then i can do it $1200 even.
http://s385.photobucket.com/albums/oo299/BlackRB/Trex%20600/