Few problems with civic

[Slow_Ej1]

I have a weird whining noise coming from my 95 ex coupe
it starts at about 2000 rpm and gets really loud at 7000
then decelerating, it gets softer again.

another problem I have is a rattling noise at idle
its really loud and then when i move the stick between 5th and reverse it stops, then I let it go back to middle and it starts up again.
pushin the clutch in stops it for a second or two then it starts back up.. again.

Stock d16z6

any help is appreciated :goodjob:

[Barefoot]

way to broad of a question. there can be lots of things making those noises.

[Patterson]

the 2nd sound like the shifter it hitting the exaust

the 1st one might be the tentioner for the timing belt but like stated above that a broad question.

[ducky1177]

the 2nd sound like the shifter it hitting the exaust

the 1st one might be the tentioner for the timing belt but like stated above that a broad question.


the second also could be the throw out bearing

[Patterson]

the second also could be the throw out bearing


never mind lol

[Barefoot]

the 2nd sound like the shifter it hitting the exaust

the 1st one might be the tentioner for the timing belt but like stated above that a broad question.


the second also could be the throw out bearing
could be both there isnt enough info to make a even close guess.


as a mech i hate when people ask whats this sound.

[Grimm Reeper]

by the whole pushing in the clutch and the noise goes away, throws a flywheel bolt is loose in my mind :D

[Patterson]

could be both there isnt enough info to make a even close guess.


as a mech i hate when people ask whats this sound.


lol i hear ya. i had people come in and try to make the noise :lmfao: all you can do is laugh

[Dwisforme05]

lol i hear ya. i had people come in and try to make the noise :lmfao: all you can do is laugh

i do the same when i see your paint booth.

pwnd.


love you no homo

[Grimm Reeper]

by the whole pushing in the clutch and the noise goes away, throws a flywheel bolt is loose in my mind :D

but then again if a bolt was loose, it would be pretty hard to shift

[Barefoot]

but then again if a bolt was loose, it would be pretty hard to shift
ive heard them bolts loose an they are loud all the time missed with hard starts and engagements

[Slow_Ej1]

okay well the whining noise is coming from the timing belt.
and its hard to get into 1st and 2nd every now and then.
if that helps any.. to give a little more info
idk how to really explain noises..

[Patterson]

okay well the whining noise is coming from the timing belt.
and its hard to get into 1st and 2nd every now and then.
if that helps any.. to give a little more info
idk how to really explain noises..


i'll stick with my answer on the 1st one.

the 2nd could be the shifter hitting the exaust "if its a short throw" if not then i would go to the trans.