valve stem seal

[Eg4LiFe]

how long will it take for you to replace it and is it easy?

[Barefoot]

its not an easy job without the right tools. pay the money let the pros do it.

[Arm&hammer]

what he said. it's a pain in the ass and you can bend a valve if you don't do it correctly.

[95droppedhatch]

yea if you are not familiar i would take it to someone its not hard but you can mess stuff up if you dont do it right but i did mine in about 2 hours on my ls last year and fixing to do my b16 next month when i tear the car apart

[xdavidscenex]

matters what motor and if you have the correct tools if its a b series ls its easy and u can get a friend to help but if its any other motor its very difficult to me it's the most difficult thing to building a motor everything else is easy. so let the pro's do it bc you can even mess up the seal trying to get it in place beacuse it has a small band around it that can fall off

[Eg4LiFe]

its not an easy job without the right tools. pay the money let the pros do it.

how much do you think i cost if i take it to the shop?

[Eg4LiFe]

thanks guys

[99jdmLs]

dseries are easier than a vtec bseries in my opinion but without the right tools and know how, it would prob be a pain....

shops vairy on prices but its affordable

[envision]

+1 let the pros do it

if your gonna change one you might as well do them all they are not that expensive to buy

[wrekonize]

its not to bad to remove them its just a real pain in the ass to compress the springs and getting the keepers to sit in right.....
like everyone says let the pros do it