YoTa_BoX
12-30-2009, 10:36 PM
A modified Aston Martin DB9 or DBS, the Cyrus has a new thick-weave carbon fibre body from Mansory. It might be the answer for someone wanting to upgrade their current Aston to mimic the One-77 supercar which the Cyrus takes obvious cues from. Almost every panel was replaced on the car except areas like the rear fender where the carbon fiber was glued in place.
Further refinements extend to the cabin which can be fully re trimmed. Again, new carbon fiber components were the theme for the dash board, steering wheel, center console and door panels.
The complete car comes at a price of €380,000 on top of the donor car.
Press Release
Mansory Cyrus – Spectacular construction based on the Aston Martin DB9 or DBS. Perfect processing and an elaborate technology are the hallmarks of this masculine aerodynamic power pack. A coilover suspension provides the best road holding and emphasises the striking rims in XXL.
The refinement is perfected by an exclusive interior programme. Haute Couture on wheels Tailor-made processing and perfect surfaces confirm the superb quality of the MANSORY designer outfit.
The CYRUS aerodynamics components are made of extremely light „prepreg autoclav carbon“ and do not only include wing extensions for the front and back, but also side skirt attachments and linings.
At the front axle, a newly designed front skirt with enlarged air inlets provides the optimal ventilation for the twelve-cylinder aggregate.
The CYRUS front is visually enhanced with the newly designed carbon bonnet. With its two slotted “power domes” additional fresh air is directed to the front motor.
Also at the tail, the refining engineers have invented something extraordinary in order to perfect the visual appearance of the Aston Martin.
The newly designed rear skirt with the integrated diffuser emphasizes the superior look and provides space for four stainless steel end pipes of the sonorous sport exhaust system.
Wheels
The optimal road grip is provided by the 9x20 and 10,5x21 inch rims in combination with Dunlop Sport Maxx tyres measuring 255/30ZR20 at the front and 295/25ZR21 at the back. The design of the ultra-light forged wheel thereby unites sportiness and elegance and perfectly fills out the wheel houses. In addition, an optimally adjusted coilover suspension lowers the centre of gravity of this noble sports car and renders perfect road holding characteristics.
Interior
The CYRUS driver will take his seat in a elaborately refined interior which is nothing short of the exterior. The entire modification includes pedals and foot rests made of aluminium as well as exquisite door sills and head rests with embroidered CYRUS logos.
MANSORY enhances the interior with a set of tailor-made carbon parts for the dash board and centre console. Generally, the noble interior is only lined with best quality materials.
Decoration stitches by expert hand on the dash board and the seats render visual high-lights and perfect the significantly beautiful overall impression of the complete leather equipment.
The ergonomically re-designed steering wheel
with airbag lies especially well in the hand.
Further refinements extend to the cabin which can be fully re trimmed. Again, new carbon fiber components were the theme for the dash board, steering wheel, center console and door panels.
The complete car comes at a price of €380,000 on top of the donor car.
Press Release
Mansory Cyrus – Spectacular construction based on the Aston Martin DB9 or DBS. Perfect processing and an elaborate technology are the hallmarks of this masculine aerodynamic power pack. A coilover suspension provides the best road holding and emphasises the striking rims in XXL.
The refinement is perfected by an exclusive interior programme. Haute Couture on wheels Tailor-made processing and perfect surfaces confirm the superb quality of the MANSORY designer outfit.
The CYRUS aerodynamics components are made of extremely light „prepreg autoclav carbon“ and do not only include wing extensions for the front and back, but also side skirt attachments and linings.
At the front axle, a newly designed front skirt with enlarged air inlets provides the optimal ventilation for the twelve-cylinder aggregate.
The CYRUS front is visually enhanced with the newly designed carbon bonnet. With its two slotted “power domes” additional fresh air is directed to the front motor.
Also at the tail, the refining engineers have invented something extraordinary in order to perfect the visual appearance of the Aston Martin.
The newly designed rear skirt with the integrated diffuser emphasizes the superior look and provides space for four stainless steel end pipes of the sonorous sport exhaust system.
Wheels
The optimal road grip is provided by the 9x20 and 10,5x21 inch rims in combination with Dunlop Sport Maxx tyres measuring 255/30ZR20 at the front and 295/25ZR21 at the back. The design of the ultra-light forged wheel thereby unites sportiness and elegance and perfectly fills out the wheel houses. In addition, an optimally adjusted coilover suspension lowers the centre of gravity of this noble sports car and renders perfect road holding characteristics.
Interior
The CYRUS driver will take his seat in a elaborately refined interior which is nothing short of the exterior. The entire modification includes pedals and foot rests made of aluminium as well as exquisite door sills and head rests with embroidered CYRUS logos.
MANSORY enhances the interior with a set of tailor-made carbon parts for the dash board and centre console. Generally, the noble interior is only lined with best quality materials.
Decoration stitches by expert hand on the dash board and the seats render visual high-lights and perfect the significantly beautiful overall impression of the complete leather equipment.
The ergonomically re-designed steering wheel
with airbag lies especially well in the hand.