d15b

[dirty-rice]

How much horsepower does a stock JDM d15B vtec have.........ive been told 3 different answers. Can some Honda guru please answer this question? I am thinking of using one in a daily driver.
Thank U---- dirty-rice

[Theycall_Metue]

if im right a brand new d15 is about 85hp to the wheels

[punkr6]

the JDM d15b vtec makes 130hp


JDM D15b

Horsepower
130ps @ 6800 rpm (128.22 hp)

Torque
14.1 kg m @ 5200 rpm (101.74 ft lbs)

Fuel Mileage
38 miles/gal (in mode 10 driving? daily driving i guess)
55 miles/gal if you drive 38 mph all day

Transmission with or without LSD
3.250-1
1.900-2
1.250-3
0.909-4
0.750-5
3.153-reverse
4.250-Final

Compression ratio
9.3:1

[dirty-rice]

ok thanks.............I guess im donna go with a zc dohc 1.6 instead since it has a little more power.....:goodjob:

[punkr6]

ok thanks.............I guess im donna go with a zc dohc 1.6 instead since it has a little more power.....:goodjob:

I wouldn't, but its your call......:goodjob:

[dirty-rice]

JDM d15b vtec or JDM ZC dohc 1.6? which would be faster and more torque in an 88 Hatch?

[Theycall_Metue]

the JDM d15b vtec makes 130hp


JDM D15b

Horsepower
130ps @ 6800 rpm (128.22 hp)

Torque
14.1 kg m @ 5200 rpm (101.74 ft lbs)



thats block power, not to the wheels

[punkr6]

JDM d15b vtec or JDM ZC dohc 1.6? which would be faster and more torque in an 88 Hatch?
DOHC specs

1.6L (1590 cc) DOHC
130-135 hp @ 6800 rpm
Bore 75.0
Stroke 90.0
C.R. 9.5:1 I

thats block power, not to the wheels

lol, no shit

[punkr6]

SOHC VTEC PGM-Fi
16V SOHC with VTEC, Programmed Fuel Injection.
Max Power : 130ps.
EG-series Honda Civic Ferio EXi (coded as E-EJ3).
.

DOHC PGM-Fi (First generation)
16V DOHC, Programmed Fuel Injection.
Max Power : 125ps.
1st Generation Honda Civic Si.
1st Generation Honda (coded as E-AS) CRX Si.
1st generation Honda 'Quint' Integra GSi and RSi.


DOHC PGM-Fi (Second generation)
16V DOHC, Programmed Fuel Injection.
Max Power : 130ps.
EF-series Honda Civic (4door and 3door) Si.
EF-series Honda CRX Si (EF7).
EG-series Honda Civic Ferio RTSi (EH1) with 'realtime' 4WD.

[Humphrizzle]

7hp

[dirty-rice]

will a distributor off a 1.6l vtec fit a d15b vtec head?

[punkr6]

will a distributor off a 1.6l vtec fit a d15b vtec head?

the z6 and the d15b sohc vtec basicly share the same head, YES it will work...

[dirty-rice]

:goodjob:

[Elbow]

I had a D15B VTEC, like said it's basically the exact same as a D16Z6.

[shane94]

I had the D15b motor in my hatch and it was a very good motor.... So i would go with the SOHC... If you put a 8lb. flywheel and stage2 clutch, it would be faster.... I had a buddy that had a stock jdm ZC motor in a eg hatch and I would just walk all over him and all i had done to my d15b is a 8lb. flywheel and stage2 clutch...

[DustnU]

the JDM d15b vtec makes 130hp


JDM D15b

Horsepower
130ps @ 6800 rpm (128.22 hp)

Torque
14.1 kg m @ 5200 rpm (101.74 ft lbs)

Fuel Mileage
38 miles/gal (in mode 10 driving? daily driving i guess)
55 miles/gal if you drive 38 mph all day

Transmission with or without LSD
3.250-1
1.900-2
1.250-3
0.909-4
0.750-5
3.153-reverse
4.250-Final

Compression ratio
9.3:1


I wouldn't, but its your call......:goodjob:


SOHC VTEC PGM-Fi
16V SOHC with VTEC, Programmed Fuel Injection.
Max Power : 130ps.
EG-series Honda Civic Ferio EXi (coded as E-EJ3).
.

DOHC PGM-Fi (First generation)
16V DOHC, Programmed Fuel Injection.
Max Power : 125ps.
1st Generation Honda Civic Si.
1st Generation Honda (coded as E-AS) CRX Si.
1st generation Honda 'Quint' Integra GSi and RSi.


DOHC PGM-Fi (Second generation)
16V DOHC, Programmed Fuel Injection.
Max Power : 130ps.
EF-series Honda Civic (4door and 3door) Si.
EF-series Honda CRX Si (EF7).
EG-series Honda Civic Ferio RTSi (EH1) with 'realtime' 4WD.

punkr6, 1st off very good info sir :goodjob:! 2nd there are way more mods for d15b vtec than for dohc zc. Vtec wins every time and plus it weighs less!!! But go with what suits you best.

[S.Brewer]

I had the D15b motor in my hatch and it was a very good motor.... So i would go with the SOHC... If you put a 8lb. flywheel and stage2 clutch, it would be faster.... I had a buddy that had a stock jdm ZC motor in a eg hatch and I would just walk all over him and all i had done to my d15b is a 8lb. flywheel and stage2 clutch...

Nice comparison, my basically stock D15b2 in my sedan came out of my 91 hatch. Hatch was wrecked... Dumbasses. Anyways, Exedy clutch and Lightened flywheel and i was walkin on a buddy'd 1.6 vtec ek hatck. Rotating mass has alot to do with it. I strongly love my sohc d15. Its such a strong motor, and i never second quess it. Im about to go MPFI y8 head vtec on it and gonna scoot a bit faster

[SLo_MKIII]

Nice comparison, my basically stock D15b2 in my sedan came out of my 91 hatch. Hatch was wrecked... Dumbasses. Anyways, Exedy clutch and Lightened flywheel and i was walkin on a buddy'd 1.6 vtec ek hatck. Rotating mass has alot to do with it. I strongly love my sohc d15. Its such a strong motor, and i never second quess it. Im about to go MPFI y8 head vtec on it and gonna scoot a bit faster

that hatch wasnt wrecked. they simply swapped the b16 out of your car and put in the hatch and put the b2 in your car :2cents:

[98blackcivic]

im sorry guys...im about to upgrade from a D series to a B....
D series are fun tho...

[SLo_MKIII]

im sorry guys...im about to upgrade from a D series to a B....
D series are fun tho...
cool...

[dirty-rice]

....so i bought a d15b for 1 bill the other day. tore it down and #1 piston has a fat hole in it:(...........anyways the cyl looks decent.......goin to machine shop monday to hine out cyl and mic everything just to be on the safe side.......who makes pistons for the JDM D15B....bearings too.....im have'n trouble finding some. i dont wana spend $500. Im goin all motor but still daily drivin it....any help would be great from all you pros...

[NOCLUE]

JDM D15 all the way, pulls nice no problems

[SleeperWRX]

You bought a engine for $100, what do you expect?lol.

[dirty-rice]

i Xspect honesty.....I am honest.....the guy could have been honest...i still would have bought it for parts.....now I gotta go and rebuild it (i dont mind)....it's gonna be mean ass hell when im done rebuilding it in 2 weeks...then we will see who's laughin...hehehehehe

[SleeperWRX]

i Xspect honesty.....I am honest.....the guy could have been honest...i still would have bought it for parts.....now I gotta go and rebuild it (i dont mind)....it's gonna be mean ass hell when in 2 weeks...then we will see who's laughin...hehehehehe


lol. if you're not gonna boost it, you'll be slow as fuck. even if you boost it.

[dirty-rice]

im not gonna boost this one. ive had many builds........when I was in the military, i had a type r civic and a crx sir.....with some nice mods.......i dont wanna be the fastest anymore.....i just want a zippy, reliable and fun car to cruise the mountain roads

[SleeperWRX]

im not gonna boost this one. ive had many builds........when I was in the military, i had a type r civic and a crx sir.....with some nice mods.......i dont wanna be the fastest anymore.....i just want a zippy, reliable and fun car to cruise the mountain roads


You want to cruise mountain roads? Meaning you want a good handling car? But you bought a civic?

:lmao:

[punkr6]

You want to cruise mountain roads? Meaning you want a good handling car? But you bought a civic?

:lmao:

bully....

[dirty-rice]

i am more than partial to civics........i just cant think of not driving one.......i like the way they handle with the right suspension.....

[SleeperWRX]

i am more than partial to civics........i just cant think of not driving one.......i like the way they handle with the right suspension.....


Ehhh, lol. Just sold my hatch with tein coilovers, handled nice, nothing compared to a WRX though..

[SleeperWRX]

bully....


:gay:

[dirty-rice]

....yea.....there's no comparison there.....two completely different vehicles.......Subi's r nice though...

[dirty-rice]

B's are good....

[EJdm]

had one of these in my civic coupe pretty nice for a little single cam...

[dirty-rice]

right on.....bump that:goodjob:

[88crxd15]

i need to find a good crank pistons and rods for my d15b its turbo can anyone help please?

[preferredduck]

DOHC will weigh more than the single cam which may be a plus in that department. it's like an h22 in an accord, it doesn't make it hella faster.