PDA

View Full Version : Power Mods clinic 750cc injector



Tree
12-22-2009, 09:29 PM
are they used for hondas? i just pick up a set of 750. LMK i will give reps for help!!!

http://www.fuelinjectorclinic.com/cgi-local/commerce.cgi?preadd=action&key=IS115-0750H

dallasb84
12-23-2009, 01:02 AM
IS115-0750H honda PART NUNBER...


looks like you need injector ring kit too...... sometimes oem injector rings will leak fuel and you need to get fatter o rings...

might wanna call and find out the specs..... in case you need a box

Tree
12-23-2009, 01:09 AM
IS115-0750H honda PART NUNBER...


looks like you need injector ring kit too...... sometimes oem injector rings will leak fuel and you need to get fatter o rings...

might wanna call and find out the specs..... in case you need a box

they came with the rings, and also where would the number be located on the injector? i can have pictures posted of them later tomorrow. also where can i find a box that plugs into the dead plug on the obd1 wiring harness?

dallasb84
12-23-2009, 01:15 AM
what dead plug are you talking about...... im lost...


the part number is usually etched or scribed on the injector.... somewhere.

Formally...
12-23-2009, 08:30 AM
also where can i find a box that plugs into the dead plug on the obd1 wiring harness?

You just use the wires at the dead plug to add the resistor box if the injectors are low resistance. I dont think there is one that actually plugs into the dead plug. Just search "resistor box install" on honda-tech for a how too.
As for finding a resistor box, you find them on MPFI efs and older accords and preludes.

Tree
12-23-2009, 09:45 AM
You just use the wires at the dead plug to add the resistor box if the injectors are low resistance. I dont think there is one that actually plugs into the dead plug. Just search "resistor box install" on honda-tech for a how too.
As for finding a resistor box, you find them on MPFI efs and older accords and preludes.

ooo.. do you more about these injectors?

Formally...
12-23-2009, 01:08 PM
If you get the injectors in the link you posted then you will not need a resistor box. They are high impedence injectors so you just need to put them in and get tuned.

tdurr
12-23-2009, 09:12 PM
ooo.. do you more about these injectors?
i have a extra resistor box if u want it. give me half a tank of gas and its urs :D

Tree
12-24-2009, 12:13 AM
i have a extra resistor box if u want it. give me half a tank of gas and its urs :D

i might i will know tomorrow

tdurr
12-24-2009, 12:32 AM
sweet. ill be outt town tho. soo like next tuse i prob could meet up

Tree
12-24-2009, 12:55 AM
sweet. ill be outt town tho. soo like next tuse i prob could meet up

i should know by then.

tdurr
12-24-2009, 12:59 AM
that works then.

Thundercat
12-24-2009, 01:09 AM
bump

tdurr
12-24-2009, 01:12 AM
stop that.

punkr6
12-24-2009, 01:13 AM
bump

why would you bump this ?

Tree
12-24-2009, 10:49 AM
why would you bump this ?

so i can learn more.