FS gsr tranny with lsd, aem ems, dc header, and a few other parts

[all-mota]

i have a few things i need to get rid of to clean up my shop, with the exception of the dc header i don't have any junk so i will not accept trades for your junk. i have no use for most stuff people try to trade but if you have some nice stuff feel free to ask.

no lowballers if you don't like my prices don't bother posting but if you have a reasonable offer feel free to post it.

I am located a little over 2 hours south of atl but am willing to meet at extra cost. i will accept paypal buyer pays 3% paypal fee and am willing to ship some items if they aren't big.

first up is a 94 gsr trans with type r lsd new bearings were installed when lsd was installed and syncros were checked everything checked out fine and the lsd was properly shimmed when installed. no grinds no bs the sticker is gone because the previous owner was going to polish the case but decided against it. comes with clutch fork and vss.
vin # JH4DB8587SS001614 $775 OBO tranny sold



dc sports jdm type r 4-1 header normal dent in bottom 2.5 inch collector has a few dings here and there shown in pics $70 OBO

http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture072.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture071-1.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture073.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture070.jpg

b18a1 block bare will come with main caps windage tray pickup oil pan and etc. needs bore and hone this is still a standard bore block. $150 OBO

http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture081.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture074.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture075-1.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture076-1.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture079-1.jpg

AEM EMS 30-1060 box for 96-98 obd 2a civics, integras, cl's and accords just cam out of my car box is in perfect working condition. will come with boomslang obd 1 to obd2a conversion harness if buyer needs it. $750 OBO or will except certain trades for aem if it's quality stuff. PRICE DROP $650 OBO

http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture058.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture060.jpg
http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture057.jpg

Differential bearing for b16 or ls transmissions brand new in honda bubble wrap $75 OBO

http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture051.jpg

evolutions industries billet steel flywheel 13lb's good for cars that need a lighter flywheel but it's not so light that your car will bogg at the track with slicks. $100 OBO

http://img.photobucket.com/albums/v377/93gsrciviconnos/Picture001-1.jpg


I also have factory b series mounts shift linkages axles halfshafts and other parts for b series swaps i also have misc black integra interior a gsr cluster and other stuff just ask and i'll see if i have it. thanks for looking and bump if you view please.

[Starrfire]

good stuff, bump

[punkr6]

who built the tranny ?

[all-mota]

who built the tranny ?

me

[punkr6]

me

located ?

[yamahart100]

hey bro i need b series mounts for a swap u still got any?

[Samhonda95]

vouch for this seller, hes an asshole but legit:goodjob:





























jk

[my_sick_si]

how many miles on the tranny? You can pm me.

[all-mota]

located ?

a little over two hours south of atl but i'm willing to meet for a little extra money


hey bro i need b series mounts for a swap u still got any?

yes i do do you need the shift linkage also


vouch for this seller, hes an asshole but legit:goodjob:
jk

your moms a asshole bish lol thank you sir


how many miles on the tranny? You can pm me.
since the bearings and lsd install about 25k

[my_sick_si]

Can you tell me the actual miles of tranny? I might pick this up

[all-mota]

Can you tell me the actual miles of tranny? I might pick this up


if i had to give a pretty close measurement i would say around
115k but i can't give a exact number hopefully thats good enough man

[my_sick_si]

PM'd

[95droppedhatch]

where are you exatly located at i might be interested in the flywheel

[gforce71]

bump. I wish my gsr trans had an ls final drive... :bump:

[all-mota]

where are you exatly located at i might be interested in the flywheel

I am located a little over 2 hours south of atl but am willing to meet at extra cost. i will accept paypal buyer pays 3% paypal fee and am willing to ship some items if they aren't big.


bump. I wish my gsr trans had an ls final drive... :bump:

why? lol i have a ls final drive i can sell you hahah but it won't fit unless you change the diff

[Black4DrEK]

Good shit indeed

GLWS

[civic gsr]

x2 bump for looking

[youngmill]

bump for that aem computer. did you mean obd2 to obd1 tho.

[all-mota]

bump for that aem computer. did you mean obd2 to obd1 tho.


no my car is obd 1 and the aem box is obd2a alot of people think i wrote it wrong i can't count how many people want to buy it to convert their car to obd 1

[all-mota]

bump

[KevinT707]

PM'd

[4drturboteg]

BUMP!!! GLWS Chris!!!

[all-mota]

BUMP!!! GLWS Chris!!!

thanks man

[all-mota]

bump

[all-mota]

uppity


make some offers people i know somebody needs some nice engine management

[KevinT707]

Don't worry, still hold it for me.

Visiting the bank tomorrow.

[my_sick_si]

do you still have the tranny for sale?

[all-mota]

do you still have the tranny for sale?

pending sale right now

[all-mota]

Don't worry, still hold it for me.

Visiting the bank tomorrow.

no problem man you got it

[all-mota]

BUMP PRICE DROP ON THE AEM

[cprtyler]

i want the flywheel if u still have it pm me lowest ull go and what black interior do u have for integra

[all-mota]

i want the flywheel if u still have it pm me lowest ull go and what black interior do u have for integra

replied