BusDriverJ Needz Gas Money to Go Home For Xmas Sale

[Bus Driver J]

Like it says, I need gas money to drive to NC to see my family. I didnt make it for Thanksgiving so I kinda need to be there. All prices are OBO but are already cheap as it is. Ill be free all day Sunday (12/20) and can meet up Mon-Wed after 6. Best way to contact me is via PM, Leave a contact number and Ill get back at ya.

K20A3 disassembled engine $350
**History is engine was removed and sat at friends place, the garden hose burst and the engine was soaked. Got inside the cylinders and fucked the rings up after sitting for a while**
Engine needs rings. Head is missing a couple cam caps (pretty much means it needs the whole cam journal assembly). Includes head, cams, block w/ crank already in it, rods and pistons, front cover, oil pan, oil pump assembly, chain, guide rails, dip stick, and random other things. If I have it and its for this K, youll get it.
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00216.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00218.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00217.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00214.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00215.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00220.jpg

D series Hydro Tranny DX $100
I barely drove the car with this tranny in but from my driving style (I drive slow) there wasnt any grinds or noises.
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00178.jpg

D16A6 head $75
Valve cover included
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00187.jpg

D16A6 PM6 pistons $30
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00192.jpg

D16Z6 P28 pistons $30
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00193.jpg

D series Intake manifold OBD1 $50
Comes with everything, rail and injectors included
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00179.jpg

OBD1 D series dizzy $50
Came off a Z6 if it matters
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00181.jpg

OBD1 D series Alternator $20
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00183.jpg

Stock Flywheel D series $10
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00182.jpg

Strut bar $10
Came off an EG
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00185.jpg

Gray EG sedan seats $80 front and rear
Fronts are in good shape with very minor spots, rears have a few burn holes and small stains
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00199.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00198.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00200.jpg

White (yes, white) EG sedan seats $50 for set
White vinyl seats. I cleaned up one and it came out pretty well. There are some small tears in the stitching but they are full intact.
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00201.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00202.jpg

EG sedan Door panels $20 for all 4
Typical fabric starting to separate but no cut or holes or such. Missing pass speaker grill, window switch, and door handle now.
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00205.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00204.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00203.jpg

88-89 Cluster $20
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00208.jpg

88-89 CRX bumper $20
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00209.jpg

CRX door (seat belt in door) $20
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00210.jpg

Side mount intercoolers $30 ea
One SR20 and one 2nd Gen Eclipse
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00212.jpg
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00211.jpg

Vortech bypass valve $50
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00213.jpg

Misc pile
If you see it and you want it (excluding the floor and the paint on the floor) name a price and I might accept it.
http://i726.photobucket.com/albums/ww267/busdriverj/Junk/IMG00186.jpg


Some intake from an EG SOLD
EG Hatch Mudflaps SOLD
D Series Starter SOLD
EG Sedan Bumper SOLD
EG Engine Harness SOLD

[Kserieskid]

A couple of things....

1) Why would the short block be outside next to a water hose for a period of time?
It would do more than damage the rings such as rust the deck of the block.

2) That is not a Vortec "BOV", it is a bypass valve and will not work with a turbo setup.

3) Will you please tity up the back of Forged? Someone's slacking......

[*EFilliated*]

is that cluster for a CRX or EF?

[Humphrizzle]

do you have any motor mount bolts?

[Bus Driver J]

A couple of things....

1) Why would the short block be outside next to a water hose for a period of time?
It would do more than damage the rings such as rust the deck of the block.

2) That is not a Vortec "BOV", it is a bypass valve and will not work with a turbo setup.

3) Will you please tity up the back of Forged? Someone's slacking......

1a) Dont ask me, it was a friend of mines at the time. Indoors now.
1b) Actually the head was on the block at the time. When I pulled it apart, I ran a hone through it and the cylinders cleaned up just well. Rings were just kinda rusty so I threw them away.

2) I didnt know that, thanks

3) Ill get Junius on that Monday, lol



is that cluster for a CRX or EF?
Will fit either car, just has to be an 88-89 cluster hood.


do you have any motor mount bolts?
Which ones, mount to chassis, or mount to bracket?

[Bus Driver J]

....double post

[Kserieskid]

lol good stuff. I say you tell Sharif to clean it. He normally parks there everyday. Bump for K parts.

[Romeo]

Might be buying that tranny from you. :goodjob:

[Humphrizzle]

passenger side bolts that mount to engine.

[Bus Driver J]

Might be buying that tranny from you. :goodjob:

Sweet, lemme know!!

[marcos713]

bump for some good parts man GL

[JDMJAYDC2]

j i may need one of those brackets in the misc. pile bump for the spanish kid

[eatsleepdrif]

is any other parts of the engine rusted

[Black4DrEK]

Good stuff man!

GLWS.. ill get that K if you still have it in a week..

[Mr Egg Rollllll]

Bump for a guy trying to get home for Christmas. I respect that. :goodjob:

[Bus Driver J]

Mud flaps and Intake Sold, thanks guys.

PM me your best offers on the K stuff. Other than the K24 in the Element, I dont have much need for K parts.

[bam-bam]

I'll take the door panels.

[Bus Driver J]

Sweet. They are at work so you can stop by whenever you want. Ill take the fronts off tomorrow.

:D

[*EFilliated*]

yea i got a CRX 89 in mine. but i want the one for the hatch cuz mine doesnt fit flush

[Bus Driver J]

The CRX and the Hatch share the same cluster in 88-89 and 90-91. If you have an 89 and its not flush then you need a 90-91. I have 2 but they dont have tachs.

[Bus Driver J]

Few parts are pending. If you are interested in a multiple parts, Ill hook ya up on a package deal. :bump:

[Bus Driver J]

Starter, R/F speaker grill, and R/F inner handle sold.

Make offers people, Id like to see as much gone as possible.

[Bus Driver J]

EG front bumper sold.
Im in no hurry to get rid of this stuff anymore. But if you need it, I got it.

[vtecace23]

GLWS, the vortech bypass valve can be used as a bov on a turbo setup. My friend used one on his and it worked great..Just sayin

[redneckhatch]

bump for alot of good stuff

[Bus Driver J]

EG engine harness sold.

This will be my last bump for this stuff. If it dont sell soon, Ill just save it for later lol.

[eatsleepdrif]

Do u still have the k20 engine for sale

[CBEeng.]

bump for a cool dude with cool parts.

[Bus Driver J]

Do u still have the k20 engine for sale

Sure do man. If its listed, I still have it.

[pInoy_R]

Hope you were able to spend some time with the family with the parts you sold. GLWS

[Jdmcivicguy]

Hey dude you still got that cluster I'll give you 20 were you located

[Bus Driver J]

Hey dude you still got that cluster I'll give you 20 were you located
Yeap, still have it. Ill be at the V for a little bit tomorrow if youre interested. Otherwise I commute between Sandy Springs and Marietta everyday.

[Jdmcivicguy]

Hey dude I want that cluster call or text at 4040150701 mames wes

[Romeo]

Want the trans. PM me please.

[Jdmcivicguy]

Dude my numbers 4049150701 if you still got the cluster give me a call