Anyone that has taken wheels apart..

[JITB]

what or how do i find out the torque for putting them back together? Do ijust need to call the wheel manufacturer?

[Echonova]

Yeppers.

[Scotsman]

Yeppers.x2

[gtikid]

A simple search might also tell ya. The wheels i've taken apart usually require about 86lbs or so, these were Enkei Racing S and my current Works

[JITB]

A simple search might also tell ya. The wheels i've taken apart usually require about 86lbs or so, these were Enkei Racing S and my current Works

as much as i google.. noone gives straight answers. most people always tell people to search.. but no one rarely posts numbers. And the manufacturer is no help..lowenhart that is. but i think i can handle it.. preciate it!

[speedminded]

A simple search might also tell ya. The wheels i've taken apart usually require about 86lbs or so, these were Enkei Racing S and my current WorksWhooaa then you've never taken a wheel apart!! 86lbs is for lug nuts or lug bolts NOT wheel bolts. Wheel bolts are 12-15 lbs/ft.

[gtikid]

Whooaa then you've never taken a wheel apart!! 86lbs is for lug nuts or lug bolts NOT wheel bolts. Wheel bolts are 12-15 lbs/ft.

You might be right. It's been a while since i've done these. I believe my Works were actually 25lbs/ft

[speedminded]

You might be right. It's been a while since i've done these. I believe my Works were actually 25lbs/ftWheel bolts are typically 6mm to 8mm in diameter and you don't want to go over 20 lbs/ft with the largest.

[southside]

Lol I was just thinking about something my friend took apart his BBS and when he put them back together he didnt torque them.But hes a pretty big guy so im sure they have enough.Lol but I would call wheel wizard or place that repairs wheels they would know.

[speedminded]

Lol I was just thinking about something my friend took apart his BBS and when he put them back together he didnt torque them.But hes a pretty big guy so im sure they have enough.Lol but I would call wheel wizard or place that repairs wheels they would know.A big guy?! It's 15 lbs-ft...you can do it with one finger lol!

[JITB]

well im gonna start taken them apart tommorrow, if im off, maybe later on today, if im up to it.

[gtikid]

A big guy?! It's 15 lbs-ft...you can do it with one finger lol!

Not when you don't have any fingertips left from sanding down lips and polishing each individual bolt :lmfao: I could of committed a crime with no gloves and not left a trace. Super smooth

[speedminded]

Not when you don't have any fingertips left from sanding down lips and polishing each individual bolt :lmfao: I could of committed a crime with no gloves and not left a trace. Super smoothStick each bolt into a drill and shove it into a polishing wad. :goodjob:

[gtikid]

Stick each bolt into a drill and shove it into a polishing wad. :goodjob:

I did. Eventually ended up using a sock and all kinds of other microfiber towels. On my Works at least. Wasn't that smart my first time around. Still came out with some pretty beat up fingertips. They heat up REALLY quick on that drill lol

[speedminded]

I did. Eventually ended up using a sock and all kinds of other microfiber towels. On my Works at least. Wasn't that smart my first time around. Still came out with some pretty beat up fingertips. They heat up REALLY quick on that drill lolNothing says you can't keep a cup of cold water handy too cool them off while polishing.

[uproot]

....I can't get these Rota's apart for the life of me, what are y'all talking about? :crazy:

[speedminded]

....I can't get these Rota's apart for the life of me, what are y'all talking about? :crazy:i lol'd

[JITB]

....I can't get these Rota's apart for the life of me, what are y'all talking about? :crazy:

try 80lbs of tq:D

[gtikid]

try 80lbs of tq:D

You mean from his engine to his wheels? :lmfao: