SiRed94
12-08-2009, 03:29 PM
1. DSM Side Mount Intercooler - Used it for a budget-built boosted D16 a while back. Has some bent fins, but still cools good. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/CopyofIntercooler.jpg
2. Grant GT Series Steering Wheel - In good shape. Uses the $20 advance auto 5 bolt hub kit. SOLD
http://i272.photobucket.com/albums/jj169/SiSleeper94/CopyofSteeringWheel.jpg
3. P29 Dome Top Pistons. These are great for all-motor/NA single builds. The pistons are in great shape, no cracks on any of the ring lands and the side skirts all look good. None of the rods had spun bearings. Pulled them out of a running ZC that got built for boost. SOLD
http://i272.photobucket.com/albums/jj169/SiSleeper94/Copyofp29pistons.jpg
4. KKK Turbo. I believe it came off of a Volkswagen. It is water-cooled and oil cooled. Doesn't have any bent or chipped blades, spins good, and has minimal shaft play. It is very dirty but will still function fine. A wire brush on a drill would clean it up a whole lot. Good for budget boosted D series. *Edit* Just noticed that it is missing the wastegate flap inside the exhaust housing. I have a couple of broken turbos that I will see if I can get the flap from. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Turbo.jpg
5. ZC/D16A1 Valve Cover. It has been professionally painted yellow. Good shape, no scratches or chips. Comes with cam gear cover. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/ZCValveCover.jpg
6. D16z6/Single Cam VTEC valve cover. Says VTEC on it. It is completely stripped, and isn't scratched or scarred. It really just needs to be cleaned and painted. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Vtecvalvecover.jpg
7. Single Cam VTEC Valve Cover - Black. The paint is chipping in a few places, but it still looks decent. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Z6valvecoverblack.jpg
8. Single Cam VTEC Valve Cover - Red. This was pretty much a paint shield for the valve train when single cam blocks got painted. So it is red with various shades of silver speckled over it. The paint is chipped, but the metal is still good. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/z6valvecoverred.jpg
All prices are firm. These are picked up prices. Sorry, but I'm not going to spend $5 in gas to drive to the varsity for a $20 sale. 30260 is my zipcode. Thanks.
http://i272.photobucket.com/albums/jj169/SiSleeper94/CopyofIntercooler.jpg
2. Grant GT Series Steering Wheel - In good shape. Uses the $20 advance auto 5 bolt hub kit. SOLD
http://i272.photobucket.com/albums/jj169/SiSleeper94/CopyofSteeringWheel.jpg
3. P29 Dome Top Pistons. These are great for all-motor/NA single builds. The pistons are in great shape, no cracks on any of the ring lands and the side skirts all look good. None of the rods had spun bearings. Pulled them out of a running ZC that got built for boost. SOLD
http://i272.photobucket.com/albums/jj169/SiSleeper94/Copyofp29pistons.jpg
4. KKK Turbo. I believe it came off of a Volkswagen. It is water-cooled and oil cooled. Doesn't have any bent or chipped blades, spins good, and has minimal shaft play. It is very dirty but will still function fine. A wire brush on a drill would clean it up a whole lot. Good for budget boosted D series. *Edit* Just noticed that it is missing the wastegate flap inside the exhaust housing. I have a couple of broken turbos that I will see if I can get the flap from. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Turbo.jpg
5. ZC/D16A1 Valve Cover. It has been professionally painted yellow. Good shape, no scratches or chips. Comes with cam gear cover. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/ZCValveCover.jpg
6. D16z6/Single Cam VTEC valve cover. Says VTEC on it. It is completely stripped, and isn't scratched or scarred. It really just needs to be cleaned and painted. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Vtecvalvecover.jpg
7. Single Cam VTEC Valve Cover - Black. The paint is chipping in a few places, but it still looks decent. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/Z6valvecoverblack.jpg
8. Single Cam VTEC Valve Cover - Red. This was pretty much a paint shield for the valve train when single cam blocks got painted. So it is red with various shades of silver speckled over it. The paint is chipped, but the metal is still good. Price: $20.00
http://i272.photobucket.com/albums/jj169/SiSleeper94/z6valvecoverred.jpg
All prices are firm. These are picked up prices. Sorry, but I'm not going to spend $5 in gas to drive to the varsity for a $20 sale. 30260 is my zipcode. Thanks.