Great Deal my fellow Shooters!

[Truegiant]

http://forum.nog.com/showthread.php?t=453112

The link doesnt work for a reason. If you know of the site you can figure it out!

http://forum.nog.com/showthread.php?p=4360471#post4360471

thats a good one too

[Truegiant]

dont pass up the good ones when you can

[slostang]

neither links work for me.

[quickdodge®]

Lolol. Later, QD.

[AllTheDude]

gon

[Danny]

gon

fail

[SiRed94]

Lol, love it, good deal too.

[Total_Blender]

I guess they have adopted rules # 1 and 2 on that forum, lol.

[Truegiant]

gon

fail x10000

[patrick4588]

ahahahaha

[Danny]

nother deal. pretty good.

http://forum.nog.com/showthread.php?t=453830

[Truegiant]

that one and another have been up there for a minute. The other they were asking $375 for and ended up selling it for like $340 picked up. I think this guy will come down a bunch too.

Oh on a side note. I am trading for a S&W 410s at a ridiculous deal if you know of anyone who wants one! Great little pistols.

[Danny]

that one and another have been up there for a minute. The other they were asking $375 for and ended up selling it for like $340 picked up. I think this guy will come down a bunch too.

Oh on a side note. I am trading for a S&W 410s at a ridiculous deal if you know of anyone who wants one! Great little pistols.

340 would be an awesome deal. I see the GI models for 425 in the store (used) now and then, but typically in better cosmetic shape than the one posted above. But i would love to get that stainless GI and build a retro shooter. Keep everything GI spec but the fire control, and dehorn the weapon, then sandblast to get a nice matte finish. Maybe even a commander hammer then bob the grip safety? hmmmm sexy. Maybe brushed flats on the slide only? ooo weee.

[Truegiant]

Squeeze / Press.. Whatever.. Tomatoe.. ToeMahToe.. haha..

$340 is a good deal on any quality 1911. Have you done any research on any of the V10 series pistols? I got a neighbor that wants be to do some work on his ultra compact v10 stainless... Looks like a neat tool.

[Danny]

what the heck is a v10?

and check this sexy thang, fresh off the press from heirloom.

http://www.louderthanwords.us/mediumfoto/picts/ulfls/09122009/11956643933.jpg

[Truegiant]

its a compact ported 10rd compact 1911. its a double stack setup that looks and feels super clean! I am thinking about buying a lower version one and doing it up!

[Danny]

http://www.thehighroad.org/showthread.php?t=68652

some folks over at THR, doesnt seem to be a big hit.

Sounds cool though, but i dont like double stack. post a pic, i couldnt seem to find it.

[Truegiant]

http://images.google.com/imgres?imgurl=http://www.modelguns.co.uk/images/v10h.jpg&imgrefurl=http://www.modelguns.co.uk/v10_ultra.htm&usg=__cb48M-cdVEvN9-2Q87UISSm7RKc=&h=498&w=600&sz=96&hl=en&start=18&um=1&tbnid=-b0G8i_kiydajM:&tbnh=112&tbnw=135&prev=/images%3Fq%3Dspringfield%2Bultra%2Bv10%26hl%3Den%2 6rls%3Dcom.microsoft:*:IE-Address%26rlz%3D1I7TSHB%26um%3D1

[Danny]

lol thats single stack and a toy gun. i saw that too when good image searching

[Danny]

here we go. dam double stack is ugly lol

http://members.cox.net/2548490/DSC_0850.JPG

[Truegiant]

ALot of people claim 3-3.5" compacts are not reliable. I have attended almost all of my pistol courses with a compact because that is what i normally carry on a day to day basis. I have owned prlly close to 30 ultra sized pistols. Springers, Kimbers, Les Bear, RIA, etc.. I have never had one problem. They have the same areas of concern as the full size guns and once you address those areas you are fine. ALOT and I mean ALOT ALOT ALOT of people who buy the ultra sized guns came from a glock or polymer framed gun. We all know that debate. Glock is better than 1911 because I dont have to blah blah blah... BS BS BS...

Anywho.. I have been doing alot of research into ported guns and I recently shot a ported glock and was impressed with it ALOT! They are not as bad as some would think and they are actually making some ammunition for ported guns. Anywho..

I am always trying to learn something new and tinkering on a new project to broaden my horizons. If I had thousands of dollars and only shot 1911's ever then I would be a 1911 smith full time. I get bored easily and not EVERYONE shoots 1911's. Most of the work I get is randomized and broad. If I am not well versed I loose customers if that makes since.

ANYWHO>>

[Truegiant]

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=149410765

[Danny]

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=149410765

way cool, and single stack :D

Ya the reliability debate for short guns is interesting. I was thinking the v10 issues were becuase it was double stack, but i have no knowledge of them. But i think it would be cool if you go double/single stack, doesnt matter.

Think i want to see if there is anything trigger kits i can get for my kahr. I really want the reset length shortened alot.

[Truegiant]

cool on the kahr kit. I have to setup a christmas tree so i am going to be off for a couple of hours!

I will keep you posted on a njew potential project.

[Truegiant]

SEX.. Close thread!

[Truegiant]

Here is some info on C&S Kahr's

http://kahr.com/PA-1D.html

[Truegiant]

danny did you check out the kahr link?

[Danny]

ya, C&S are proud of thier khars. I dont think they make parts kits or anything for trigger jobs.

[Truegiant]

I posted up a new project I got on trade. I guess one of the mods deleted it because i said i wanted to sell it and another gun of mine to by a car for my brother. Anywho...

I picked up a s&W 410s. A neat little pistol. I am working on trading it for a cw9 so i can have a kahr to work on. I borrowed my neighbors and have been looking at it. I think I can rework the ramp of the trigger to adjust pull and reset length. Anywho.. If I end up getting it i will let you know and I will order a couple of replacement triggers to start practicing with.

[mmmmpsi]

ya'll need some taste in guns.. :)))

http://img46.imageshack.us/img46/4907/xd9802.gif - 0wns all.

[Truegiant]

Hmm.. Taste huh.. Polymers.. Are you serious! LAME!

[SiRed94]

ya'll need some taste in guns.. :)))

http://img46.imageshack.us/img46/4907/xd9802.gif - 0wns all.

:no:.... that is all

[Danny]

posted to get this thread back to some sexy pistols. :D

http://www.louderthanwords.us/mediumfoto/picts/ulfls/10072008/15003359231.jpg

[Danny]

http://forum.noggy.com/showthread.php?t=457427

SOMEONE CALL ON THIS COLT 45 FOR $450. no idea what it is specifically.

[Truegiant]

did anyone call about it? sounded like a good deal.

[Danny]

i PMd, but didnt call. sold now i think

[Truegiant]

I rode my new yz400f tonight around the neighborhood. WOW! Torquey beast. Anywho.. Trying to sell it to finance some more projects!

I called about some custom 1911 double stack lowers today. I am thinking of building something in the near future! My enlistment bonus comes in the mid january check! Will prlly start doing something then.

[Danny]

interesting. who else besides STI is out there for double stackers?

My buddy has the commander itch, and is eyeballing the springfield GI. Gotta get him sold on that. :D