View Full Version : the price i pay for being "hella flush" with my blazer [OHNOEZ!!!!1]
CHADbee
12-06-2009, 05:01 PM
it may be time for a baseball bat and a heat gun....whatcha think?
on ramp bump at 50mph :doh:
http://i254.photobucket.com/albums/hh98/chadbee123/tire1.jpg
http://i254.photobucket.com/albums/hh98/chadbee123/tire2.jpg
please excuse the nastyness of my truck, its normally clean but i have had to much stuff going on to wash it.
silverDA
12-06-2009, 05:09 PM
happens to the best of us/
AlanŽ
12-06-2009, 05:15 PM
yea definitely time brotha
MROTH
12-06-2009, 05:15 PM
call lisa. shes a local off the maxima forum and im sure shes on IA somewhere.... shell roll both fenders for like $50. 404-775-3143. tell her mike sent you.
Prime.
12-06-2009, 05:20 PM
yeah, you may want to roll those fenders.
CHADbee
12-06-2009, 05:25 PM
LOL @ blazer with rolled fenders.
the messed up thing is next week a 80lb box and 50lb sub is going in the back and the rear is what bottomed out even though the rear sits about 3/4-1 inch higher than the front.
-EnVus-
12-06-2009, 05:28 PM
Roll them fenders out more lol
S.Brewer
12-06-2009, 05:32 PM
roll and slight flare. i see it done on alot of BD'd s dimes that run a crazy offset that dont camber alot. i think it looks good as well.
roscoe
12-06-2009, 05:50 PM
a blazer shavin tires?? lol earns my reps
CHADbee
12-06-2009, 05:57 PM
a blazer shavin tires?? lol earns my reps
LOL
I know when's the last time you seen that lol
MrGurley
12-06-2009, 05:59 PM
damn nice work!!!
Kamikaze
12-06-2009, 06:04 PM
Dial in some camber.
http://img.photobucket.com/albums/v225/hushypushy/forums/camber.jpg
Problem solved.
CHADbee
12-06-2009, 06:09 PM
damn nice work!!!
uh...thanks...i guess :thinking:
lol
Dial in some camber.
http://img.photobucket.com/albums/v225/hushypushy/forums/camber.jpg
Problem solved.
GTFO
lol
im not sure if i can do that
singhondeck
12-06-2009, 06:10 PM
lol that sucks
CHADbee
12-06-2009, 06:11 PM
lol that sucks
yah pretty much. even if its holding air by tomorrow it still looks ugly lol
Prime.
12-06-2009, 06:13 PM
LOL @ blazer with rolled fenders.
the messed up thing is next week a 80lb box and 50lb sub is going in the back and the rear is what bottomed out even though the rear sits about 3/4-1 inch higher than the front.
bottoming out on the tire or axle to frame? If you go any lower, you may have to do some sort of notch. A suicidedoors or equivalent bolt-in notch would probably be your best bet. let me know if you have any questions, I know my way around the s10 world.
GangstaCoupe
12-06-2009, 06:13 PM
LOL @ blazer with rolled fenders.
the messed up thing is next week a 80lb box and 50lb sub is going in the back and the rear is what bottomed out even though the rear sits about 3/4-1 inch higher than the front.
get a bolt in mini notch, your back will thank you...
CHADbee
12-06-2009, 06:14 PM
i have a SD bolt in C-notch :goodjob:
it bottomed out on tire not frame
Prime.
12-06-2009, 06:17 PM
i have a SD bolt in C-notch :goodjob:
it bottomed out on tire not frame
oh awesome. so yeah, i would just roll the fenders or even cut out the inner lip. :goodjob:
CHADbee
12-06-2009, 07:52 PM
oh awesome. so yeah, i would just roll the fenders or even cut out the inner lip. :goodjob:
i did it right, all brand new belltech nitro 2 drop shocks, DJM springs and beltech drop spindals and ground force angled blocks. it does have a pulled leaf in the rear and that kinda ghetto lol but it works and it still rides better than it did stock.
yeah i was thinking to taking a wheel to it lol
D3UC3S
12-06-2009, 07:54 PM
Sux chad! Thats the price of bein LOW!
I saw you rollin into the V as me and Atif were dippin...The Blazer is lookin dope!!!:goodjob:
CHADbee
12-06-2009, 07:57 PM
Sux chad! Thats the price of bein LOW!
I saw you rollin into the V as me and Atif were dippin...The Blazer is lookin dope!!!:goodjob:
man that mother fucker was/still is dirty as fawk lol it looks decent when clean but its bad right now and was at the V too.
D3UC3S
12-06-2009, 08:06 PM
It was also dark as shit and my eyeballs were frozen LOLLOL...but seriously, its very well done! Smooth as glass!
87 Turbo II
12-06-2009, 08:46 PM
http://img.photobucket.com/albums/v225/hushypushy/forums/camber.jpg
This is soo the look I have been going for in the 7. :lmao:
nothin a lil camber cant fix...
Prime.
12-07-2009, 02:31 AM
nothin a lil camber cant fix...
haha hell yeah, just swap to a corvette irs setup in the rear and tubular control arms up front and you could have sick camber when layed out and perfect driving stance aired up.
wow, i feel you chad. i got the same problem. good luck
bdydrpdmazda
12-07-2009, 04:08 AM
you should actually feel good about it, it means youre tucking them shits
Sammich
12-07-2009, 07:27 AM
rolled fenders are for pussies who dont like camber....so roll ur fenders LOLOL
Glides
12-07-2009, 07:29 AM
call lisa. shes a local off the maxima forum and im sure shes on IA somewhere.... shell roll both fenders for like $50. 404-775-3143. tell her mike sent you.
Plus she's a chick...and chicks rolling fenders is hot!
call lisa. shes a local off the maxima forum and im sure shes on IA somewhere.... shell roll both fenders for like $50. 404-775-3143. tell her mike sent you.
:thinking:
Plus she's a chick...and chicks rolling fenders is hot!
:yes:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.