2.2L
11-25-2009, 04:28 AM
I have several things for sale. It came off of my prelude and all of the parts are in good functioning condition besides the normal wear and tear
97-01 Prelude Skunk2 Mega Power Cat Exhaust Non-SH - $200 OBO LOWERED PRICE $150
The exhaust does have scrapes from being on a lowered car, but it does not deter any of the functionality. It does come with a silencer but that would defeat the whole purpose of having an aftermarket exhaust. All gaskets, bolts, and nuts that are needed are also included.
There are no dents or holes in the exhaust and the exhaust pipe. The only problem would be that one of the hangers on the exhaust pipe section had to be cut because I had a O-ring welded on to it to prevent it from sliding off the exhaust grommet. Any exhaust shop would be able to weld on a new hanger for about 15 dollars. There is a close up picture of the hanger in question, and anyone would probably agree that it is an easy fix.
http://img.photobucket.com/albums/v408/latigidyblod/DSC00685.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00686.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00687.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00689.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00688.jpg
97-01 AEM AEM Short Ram Intake and K&N Air Filter
Intake - $60 OBO LOWERED PRICE $40
Air Filter - $10 OBO
Intake + Air Filter - $65 OBO LOWERED PRICE $45
Next up for sale is my AEM Short Ram intake with a K&N Filter. Both are in functioning condition. The filter might be dirty at the moment, but I will include a K&N Air Filter Cleaning Kit if you purchase the filter with or without the intake. When I ordered the K&N filter I made the mistake of ordering a small size, and had to use an adaptor to install it. It does not hamper performance or sound in anyway. All screw seals will be included, including the one that will hold the intake to the throttle body.
The intake does have a hole in it, but I have plugged it with a grommet. The little hole is completely sealed and I had no problems with it when installed in my own car. I have a picture below showing you the grommet that is plugging the hole.
http://img.photobucket.com/albums/v408/latigidyblod/DSC00690.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00692.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00691.jpg
All prices are OBO, but please no lowballers. The only thing I really want to trade these for is a 16gb IPod Touch, but I will take into consideration any reasonable trades and/or cash offers. Only thing I will not take for sure is car parts or paintball gear. I live in Tucker GA 30084, but I am willing to meet up anywhere as long as it is not too far. I will also ship, but buyer will pay for shipping. If you have any questions do not hesitate to ask me through PM's, you could call or text me on my cell (404-512-3037), or simply post a reply on this thread. I want these gone, been sitting in my garage for too long. Motivated to sell, just throw me offers!
97-01 Prelude Skunk2 Mega Power Cat Exhaust Non-SH - $200 OBO LOWERED PRICE $150
The exhaust does have scrapes from being on a lowered car, but it does not deter any of the functionality. It does come with a silencer but that would defeat the whole purpose of having an aftermarket exhaust. All gaskets, bolts, and nuts that are needed are also included.
There are no dents or holes in the exhaust and the exhaust pipe. The only problem would be that one of the hangers on the exhaust pipe section had to be cut because I had a O-ring welded on to it to prevent it from sliding off the exhaust grommet. Any exhaust shop would be able to weld on a new hanger for about 15 dollars. There is a close up picture of the hanger in question, and anyone would probably agree that it is an easy fix.
http://img.photobucket.com/albums/v408/latigidyblod/DSC00685.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00686.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00687.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00689.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00688.jpg
97-01 AEM AEM Short Ram Intake and K&N Air Filter
Intake - $60 OBO LOWERED PRICE $40
Air Filter - $10 OBO
Intake + Air Filter - $65 OBO LOWERED PRICE $45
Next up for sale is my AEM Short Ram intake with a K&N Filter. Both are in functioning condition. The filter might be dirty at the moment, but I will include a K&N Air Filter Cleaning Kit if you purchase the filter with or without the intake. When I ordered the K&N filter I made the mistake of ordering a small size, and had to use an adaptor to install it. It does not hamper performance or sound in anyway. All screw seals will be included, including the one that will hold the intake to the throttle body.
The intake does have a hole in it, but I have plugged it with a grommet. The little hole is completely sealed and I had no problems with it when installed in my own car. I have a picture below showing you the grommet that is plugging the hole.
http://img.photobucket.com/albums/v408/latigidyblod/DSC00690.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00692.jpg
http://img.photobucket.com/albums/v408/latigidyblod/DSC00691.jpg
All prices are OBO, but please no lowballers. The only thing I really want to trade these for is a 16gb IPod Touch, but I will take into consideration any reasonable trades and/or cash offers. Only thing I will not take for sure is car parts or paintball gear. I live in Tucker GA 30084, but I am willing to meet up anywhere as long as it is not too far. I will also ship, but buyer will pay for shipping. If you have any questions do not hesitate to ask me through PM's, you could call or text me on my cell (404-512-3037), or simply post a reply on this thread. I want these gone, been sitting in my garage for too long. Motivated to sell, just throw me offers!