Missing bolt!! Yet again.... lol.

[teh_mugen18]

Somehow when swapping my engine out, i ended up losing one of the upper bolts that attatches my transmission to the engine block; its the one closest to the front engine mount, and im not really sure where i'd get it other than at the dealership...

Another thing is, what could the part number/label for that bolt possibly be?? I've looked through some indexes of part numbers for bolts, but theres WAY too many for me to just choose the right one. can i get any help??:thinking:

[T34me]

why dont you just go to dealer and let them do the leg work and look it up??

[uproot]

Or try honda parts connection, I'm sure they'd know the bolt

[Barefoot]

there is like 5 or 6 other bolts if your missing 1 your fine.

[Black4DrEK]

^
x2 LOL.. i once drove with only a couple tranny bolts!! lol. slamming gears and everything!

I got emm all now tho..

[TommyD1919]

just go to the dealer. Or something like pull-a-part....They are common among alot of other models too...

[Barefoot]

^
x2 LOL.. i once drove with only a couple tranny bolts!! lol. slamming gears and everything!

I got emm all now tho..
I've pulled whole swaps that had 0 bolt in then just pins

[eraser4g63]

Ace hardware just get some grade 8 bolts and match up the thread and what not.

[teh_mugen18]

See, the only reason i dont go to places like Pull A Part is due to the fact that, in about 99.9% of the Hondas/Acuras that go in there, it seems like engines, transmissions, entire front clips get swooped outta those cars within a day or two... Its ridiculous. LOL thats why i kinda stopped goin to junkyards for parts on my car.

[Barefoot]

See, the only reason i dont go to places like Pull A Part is due to the fact that, in about 99.9% of the Hondas/Acuras that go in there, it seems like engines, transmissions, entire front clips get swooped outta those cars within a day or two... Its ridiculous. LOL thats why i kinda stopped goin to junkyards for parts on my car.
X2

[teh_mugen18]

why dont you just go to dealer and let them do the leg work and look it up??


and why waste the time, etc. standing there looking around for part numbers when i can do it here on my butt and take as much time as i'd like pouring through the diagrams? lol, im just sayin'

[j0nbunklah0m]

yea u'll be fine without it. but go to HPC if u realy want it

[marcos713]

U won't spend more than 10min in the dealership. I've gone to buy random bolts and nuts for my fuel rail, shift linkage and fuel regulator. You tell them what car it is and they pull up a diagram of the section where the bolt would be located and you just point it out. Easy as that.

and why waste the time, etc. standing there looking around for part numbers when i can do it here on my butt and take as much time as i'd like pouring through the diagrams? lol, im just sayin'

[G.C]

Yup. Just go to the dealership its really simple and easy.

[JJSPEC Racing]

Should be Part# 90050-PG7-000
It is called a flange bolt 12 X 65mm and lists for about $4.72
Happy Thanksgiving!

This is the part number that you were asking about I believe. One of the bellhousing bolts.

[j0natell0]

Should be Part# 90050-PG7-000
It is called a flange bolt 12 X 65mm and lists for about $4.72
Happy Thanksgiving!

This is the part number that you were asking about I believe. One of the bellhousing bolts.



damn werd? those motherfuckers tried to jipp me than lol. i was missing the same bolt and went up there and they told me 18 bucks for one bolt. waaaah? :screwy:

[gsrteg]

Ace hardware just get some grade 8 bolts and match up the thread and what not.

I agree, go to ACE hardware, like what eraser4g63 said. Bring a bolt and match it up. ACE hardware is the shiz when it comes to bolts.

[JJSPEC Racing]

damn werd? those motherfuckers tried to jipp me than lol. i was missing the same bolt and went up there and they told me 18 bucks for one bolt. waaaah? :screwy:
Let me know next time. I might can help you out.

[88civic_hatc]

bump for jimmy but i dont have all the bolts on my trans