cardesignz
11-23-2009, 02:03 AM
Updated 1/27/2010
Thermal R&D exhaust - off of a 2 door 1992 Integra - has plenty of scrapes on it - cracked at the resonator - muffler section is still fine - will NOT bolt up to your stock midpipe - will NOT part the axle back (you'll most likely need the flange on the midpipe to even use the axle back) - ideal use is to buy a resonator and get someone with a tig welder to replace it or to just use it for the axle back (either way, you'll need to do some welding unless you already have a Thermal exhaust that needs the muffler replaced) - I measured 2.25" ID - it's a $600 stainless steel exhaust - $250 FIRM
(Click on thumbnails for larger pictures)
Top of muffler (side that faces the car):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010229.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010229.jpg)
Bottom of muffler (side that faces the ground):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010231.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010231.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010230.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010230.jpg)
bottom of midpipe (side that faces the ground):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010235.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010235.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010234.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010234.jpg)
Part that is split wide open at the resonator:
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010233.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010233.jpg)
top of midpipe (side that faces the car):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010236.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010236.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010237.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010237.jpg)
AEM front brake pads - part number 26-125 (Will fit 90-93 Integra as well as the other applications listed on the box in the picture) - $45
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010200.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010201-1.jpg
NEW 90-93 Integra brake booster - $100
http://i13.photobucket.com/albums/a287/phatcardesignz/Picture017.jpg
Slightly used 90-93 Integra 15/16" NISSIN OEM master cylinder - NON ABS - (still fairly new since the reservoir has not yellowed) - $40
http://i13.photobucket.com/albums/a287/phatcardesignz/Picture020.jpg
Tenzo R front strut bar - I think it's for an EG/DC - $45
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010238.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010239.jpg
Rare oldschool JDM GAB and FEEL'S front strut bars - I think they fit EG/DC/EK - $80 each
http://i13.photobucket.com/albums/a287/phatcardesignz/P10102401.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/10-19-071104.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/10-19-071103.jpg
90-01 Integra / 99-00 Civic SI drilled and slotted rotors - $SOLD!
90-93 Integra axles - $SOLD!
+Reps for bumps and sales :goodjob:
-Reps for lowballing :2up:
Thermal R&D exhaust - off of a 2 door 1992 Integra - has plenty of scrapes on it - cracked at the resonator - muffler section is still fine - will NOT bolt up to your stock midpipe - will NOT part the axle back (you'll most likely need the flange on the midpipe to even use the axle back) - ideal use is to buy a resonator and get someone with a tig welder to replace it or to just use it for the axle back (either way, you'll need to do some welding unless you already have a Thermal exhaust that needs the muffler replaced) - I measured 2.25" ID - it's a $600 stainless steel exhaust - $250 FIRM
(Click on thumbnails for larger pictures)
Top of muffler (side that faces the car):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010229.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010229.jpg)
Bottom of muffler (side that faces the ground):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010231.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010231.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010230.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010230.jpg)
bottom of midpipe (side that faces the ground):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010235.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010235.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010234.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010234.jpg)
Part that is split wide open at the resonator:
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010233.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010233.jpg)
top of midpipe (side that faces the car):
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010236.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010236.jpg)
http://i13.photobucket.com/albums/a287/phatcardesignz/th_P1010237.jpg (http://s13.photobucket.com/albums/a287/phatcardesignz/?action=view¤t=P1010237.jpg)
AEM front brake pads - part number 26-125 (Will fit 90-93 Integra as well as the other applications listed on the box in the picture) - $45
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010200.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010201-1.jpg
NEW 90-93 Integra brake booster - $100
http://i13.photobucket.com/albums/a287/phatcardesignz/Picture017.jpg
Slightly used 90-93 Integra 15/16" NISSIN OEM master cylinder - NON ABS - (still fairly new since the reservoir has not yellowed) - $40
http://i13.photobucket.com/albums/a287/phatcardesignz/Picture020.jpg
Tenzo R front strut bar - I think it's for an EG/DC - $45
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010238.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/P1010239.jpg
Rare oldschool JDM GAB and FEEL'S front strut bars - I think they fit EG/DC/EK - $80 each
http://i13.photobucket.com/albums/a287/phatcardesignz/P10102401.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/10-19-071104.jpg
http://i13.photobucket.com/albums/a287/phatcardesignz/10-19-071103.jpg
90-01 Integra / 99-00 Civic SI drilled and slotted rotors - $SOLD!
90-93 Integra axles - $SOLD!
+Reps for bumps and sales :goodjob:
-Reps for lowballing :2up: