RJ's325ITS
11-21-2009, 08:23 PM
I have 1 set of S52 valve springs for sale (24 valve springs total), I'm upgrading so I have no need for these. This set is a good upgrade for M5x base engines.
$90 shipped
---------------------------------------------------------------------------------------------------------------------
This housing came on my S52, it's in good condition and worked pretty well when I took it out of my engine.
I was using this housing in my turbo car for the:
Turbo feed line
Oil pressure gauge sender unit.
The housing has a total of 4 ports, you can miss match them to your taste, or used them in different multiple setups, such as:
Vanos, oil switch, oil pressure & oil temperature
Vanos, turbo feed line, oil pressure & oil temperature
Or even use a mechanical pressure gauge.
I've been told that ports #1 & #2 could be use for an oil cooler, with the help on an external thermostat. This housing does not have the internal thermostat, it didn't come with it.
Asking $150 shipped w/in the US.
here are some pics,
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0613.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0614.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0618.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0615.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0616.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0617.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0619.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0620.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0621.jpg
---------------------------------------------------------------------------------
I have a M50 block for sale, has 100-125K miles on it. You can use this block for:
M50 straight swap
M52 w/a OBD1-Conv.
S50 bore it, & then bolt it on
S52 OBD1-Conv. + boring it.
Here it is a list of what you will get:
1 M50 block
1 M50 crankshaft
6 M50 rods
6 M50 pistons w/ rings
7 crankshaft main caps w/ bearings
$150 + shipping
thanks
PS: Im willing to part it out for the right price
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0623.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0625.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0624.jpg
-------------------------------------------------------------------------------------
Good upgrade for those that have the OBD2 manifold, also must have for turbo since the OBD2 leak under hi-boost.
Looking to get $90 shipped w/in the U.S.
Thanks
Here are some pics:
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0629.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0630.jpg
----------------------------------------------------------------------------------------
I also have lots of other parts, such as M50 cams, cam gears, timing chains, rods, pistons, A/C brackets, oil filter housings, valve covers, engine covers, chain guides, motor bracket etc....
So sent me a request via PM for whatever part you are looking, and I will reply asap.
Thanks a lot,
Rafa
$90 shipped
---------------------------------------------------------------------------------------------------------------------
This housing came on my S52, it's in good condition and worked pretty well when I took it out of my engine.
I was using this housing in my turbo car for the:
Turbo feed line
Oil pressure gauge sender unit.
The housing has a total of 4 ports, you can miss match them to your taste, or used them in different multiple setups, such as:
Vanos, oil switch, oil pressure & oil temperature
Vanos, turbo feed line, oil pressure & oil temperature
Or even use a mechanical pressure gauge.
I've been told that ports #1 & #2 could be use for an oil cooler, with the help on an external thermostat. This housing does not have the internal thermostat, it didn't come with it.
Asking $150 shipped w/in the US.
here are some pics,
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0613.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0614.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0618.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0615.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0616.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0617.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0619.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0620.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0621.jpg
---------------------------------------------------------------------------------
I have a M50 block for sale, has 100-125K miles on it. You can use this block for:
M50 straight swap
M52 w/a OBD1-Conv.
S50 bore it, & then bolt it on
S52 OBD1-Conv. + boring it.
Here it is a list of what you will get:
1 M50 block
1 M50 crankshaft
6 M50 rods
6 M50 pistons w/ rings
7 crankshaft main caps w/ bearings
$150 + shipping
thanks
PS: Im willing to part it out for the right price
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0623.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0625.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/IMG_0624.jpg
-------------------------------------------------------------------------------------
Good upgrade for those that have the OBD2 manifold, also must have for turbo since the OBD2 leak under hi-boost.
Looking to get $90 shipped w/in the U.S.
Thanks
Here are some pics:
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0629.jpg
http://i18.photobucket.com/albums/b103/rafaelnos/Other/IMG_0630.jpg
----------------------------------------------------------------------------------------
I also have lots of other parts, such as M50 cams, cam gears, timing chains, rods, pistons, A/C brackets, oil filter housings, valve covers, engine covers, chain guides, motor bracket etc....
So sent me a request via PM for whatever part you are looking, and I will reply asap.
Thanks a lot,
Rafa