91 S13 Hatch w/LS6 modded 423whp 428tq

[Dozier]

Ok, so I need a daily driver that does not use so much gas. I have a job that requires a bunch of driving around town. I am willing to trade so just shoot me an offer. Also am not sure on price yet. Will start out the price at 12k. Car is very strong and reliable...It's a chevy now. It will break traction and spin the tires through 5th gear. 6th gear is great on highways as it is around 2k rpm doing around 80 mph.




Engine:
Motor has around 80,000 miles on it
Trans and clutch, flywheel around 200 miles
LS1 block
LS6 intake manifold
LS6 heads ported / polished
Titanium retainers
Crane springs
Crane valves 205/157
Hardened pushrods
Comp cam custom grind 232/236-542/545 Lobe seperation 113
Ported LS2 oil pump
LS2 front sump oil pan
Custom oil catch can
K&N valve cover breather
Corvette fuel rail covers
Ported Throttle body
MAF no screen
34lb injectors
Custom 1-3/8th headers
Dynomax bullet mufflers
Custom mild steel coolant piping, no hoses
High torque starter
Steel braided high pressure power steering line
Billet steel cnc's solid motor mounts
Custom subframe crossmember for motor
Custom transmission mount
Pro 5.0 shifter and short stick with Hurst leather shifter knob
Built T-56 6-speed transmission from Tick Performance for 700hp
One piece steel drive shaft
Tomei Technical Traxx 2-way LSD
Koyo aluminum radiator
Electric fan wired to switch inside car
160 degree thermostat to keep it cool
Spec 3+ clutch and billet steel flywheel
Steel braided slave cylinder line and custom slave cylinder with mounting
CNC's custom factory sway bar spacers to clear oil pan
Walboro 255 fuel pump
Spliced wire harness to make it all work
Tuned by Henson Performance on a Dynocom 423whp and 423tq, which is roughly 450 on a dynojet.

Suspension:
KYB adjustable shocks
Tein springs
TC Sportline ruca's
TC Sportline traction rods
TC Sportline upper toe adjustors
TC Sportline lower toe adjustors
Polyurethane subframe bushing kit
Solid aluminum subframe bushing kit
Front strut tower bar
Rear strut tower bar
Rear tie bar


Exterior:
Sleepy eye conversion
Origin body kit with clear front square markers
Painted over center garnish on rear
Rattle can flat black currently..However the car is getting painted Metallic Dark Purple next week.
Will be repainting shortly with spray gun either gloss black or flat again. if someone wants to paint something else, I can drop the price to cover painting yourself.

Lighting:
8000k HID kit installed
LED tag light
LED front amber markers

Brakes/wheels:
5 Zigen FNO1RC wheels gloss black with silver lip
Front 17x8.5 5x114.3
Rear 17x9.5 5x114.3
Steel braided brake lines
Front brakes: 350z Track edition slotted rotors and Z32 calipers
Rear brakes: Z32 rotors slotted and drilled with z32 calipers

Interior:
Currently is partial brown interior in car. Complete interior swap will be completed next week for black interior almost flawless with one crack in dash. S14 seats up front and factory rear seat.
I started installing aftermarket gauges because I had them laying around. So far I have a tach with shift light that works, voltage, oil pressure, and coolant temp. Speedometer can be hooked up by purchasing a dakota digital converter box. I just don't feel the need to spend the 80 bucks on it right now.
No radio or speakers, but will install once the interior gets put back in.
Heater works
No A/C lines or compressor. Just blows air.
Keyless entry installed with alarm system. The alarm has been disabled to only allow the keyless entry to work. It was annoying. I will know if someone tries to steal it. It is loud. Ha ha.


Dyno time...Pull made in fourth gear. It is in 3rd when the film starts. He gets out of the car with it rolling.
http://www.youtube.com/watch?v=9y3jqRMCp08 (http://www.youtube.com/watch?v=9y3jqRMCp08)


First start up with exterior and interior shots. Shifter is a joke, just for fun. Now is leather with short shifter.
http://s19.photobucket.com/albums/b174/dozier1/?action=view&current=Picture-2.flv (http://s19.photobucket.com/albums/b174/dozier1/?action=view&current=Picture-2.flv)

In the pictures below, the bumper was not attached yet. It was just sitting on the frame.

http://i19.photobucket.com/albums/b174/dozier1/Picture001-3.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture002-3.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture003-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture004-1.jpg

[tmracing83]

Nice car man. Glws

[Echonova]

Dear God. Hotness.

Wife won't let me have two 240's... GLWS

[Dozier]

So trade me one of yours plus cash...Unless it is of equal value.

[Vteckidd]

trade for ITR powered CRX and my hopes and dreams?

Nice car

[GSRteg®]

Hotness

[tmracing83]

Damn I bet this car would be soo
Fun to drive!!!

[Dozier]

No go on the CRX.

[ItsBlack]

Dear God. Hotness.

Wife won't let me have two 240's... GLWS

...tell her its a Chevy :goodjob:

[Dozier]

Yea...I could put a bowtie on it for you.

[highspeed]

this car is in Gardendale right?

If so you have a ton of work done to this car. I saw it out there when you were getting the headers made. I bet this thing will fly......good luck

[MerkDiesel]

Pure Sex!

If only I could fit in it!:cry:

[Dozier]

Yup...It was in Gardendale getting the work done to it...Now for sale...I just need a daily driver...Don't really care what it is...Car, truck, bike, whatever.

[koolaidman]

want a 350z?

[Dozier]

Sure...Send me pics of what you got.

[Dozier]

Just saw your sale thread Koolaid...I don't have any cash on top of the car...Sorry.

[AZN_Pride]

Possible interest in a boosted Spec V with a Maxima Final drive?

[NevrNufTorq]

nice build:goodjob:get some paint and this thing will be a real beauty!!! glws

[Dozier]

Painting this week or weekend. Not sure on color.

Send pics of Spec V...Exterior, Interior, Under hood
Full mod list
Mileage
Mechanical issues

[Glides]

Pretty slick man. Good luck.

[Dozier]

Thanks.....All pm's replied, open to trades for a nice daily driver.

[Brick]

I wish it was complete as far gauges, ac, and all. I've
got cash and really like this.

[Dozier]

Well it is getting better...Just ordered Dark Metallic Purple paint...Also am putting full black interior back into the car. Heat works...Just no A/C.

[m3th0d]

pure sex! glws

[Dozier]

Thanks......

[Dozier]

Put new leather black bucket seats in her today.

[MachNU]

now that is some serious power to weight ratio! even more funny that, that block has alot more power hidden in the tune!

[otroEg]

NICE BUILD.GLWS

[iBeboostin]

:eek:Purple paint?? NO!!!

[BLAKOUTD]

aye how much u salin dat 240 8284482373

[NBP01LS]

Any updated pics w/ paint?

[broncos97]

interested in a 95 s14 built by turbodave?

[MistaCee]

Wouldn't expect that under there.

[FAM0U5]

trade for supra? :ninja:

[Dozier]

Yes trades are excepted...Supra hell yes. PM mods mileage, year, mechanical condition and all that stuff.

Car is currently being prepped for paint. It will be painted this coming week or weekend. Also wheels are being powder coated bronze, and full interior black is going back into the car.

[Dozier]

Still have............

[Dozier]

Price drop to 10k...Got 4 tickets, need to sell.

[Black R]

trade for ITR powered CRX and my hopes and dreams?

Nice car


lol

[Mr Egg Rollllll]

Pmed

[tstaubly]

pm'd

[Boosting EG]

nice

[Dozier]

Pending trade in January.

[JF868849]

saw the car in person at the v very clean car nice swap! bump clean car

[Dozier]

Still have the car. Trade did not happen.

[Dozier]

New year bump.

[Dozier]

To the top for me...

[brxtacy]

was this car at the vulcan meet a couple weekends ago?

if not, there is an identical 240 with a ls6 that was in bham that day lololol

[Dozier]

That was me..Stirs up a crowd a little bit don't it?

[Thighs]

SICK car. maybe not the prettiest at the moment, but DEFINITELY runs good. thanks for the ride again lol.

i thought you said it was an ls2 though?

[HachiDori]

edit.

ofcourse i see it after i post

[big mac]

trade for built ruebo eg hatch?

[Dozier]

SICK car. maybe not the prettiest at the moment, but DEFINITELY runs good. thanks for the ride again lol.

i thought you said it was an ls2 though?

Wrong sir...Never said that.


trade for built ruebo eg hatch?

No Hondas.

[highspeed]

damn I thought this would be gone by now........ill be done with training on friday. If your by the shop(the one off 31) I want to see this thing run.

[jhadleyh]

DID YOU USE A SWAP KIT FOR THIS OR DID YOU HAVE YOUR OWN MOUNTS MADE?

[TougeGTR-33]

pm'd

[Dozier]

If you want to look at it. The car is no longer at the shop. I DD it. Hit me up.

We used Daft Innovations mounting hardware....

PM Replied.

[TougeGTR-33]

where you located??

[Dozier]

Fultondale, Alabama

[Brandon331]

how much are you asking for this?

[lovinmydodge]

def get some current pics up, i've got a settlement being finalized, i'd def like to look at this!

[Dozier]

http://i19.photobucket.com/albums/b174/dozier1/Picture025-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture024-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture026-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture027-1.jpg

Body work is almost complete. Shaving body lines and going for low and flush.

Also this week added, front strut tower bar, rear tower bar, rear tie bar, valve cover breather, oil catch can, z32 slotted and drilled rear rotors and new pads, corvette fuel rail covers, and solid rear aluminum subframe bushings. Also had a steel braided line manage to rub on the right rear until it busted. Ordered new steel lines for the rear today.

Also, I do have the plastic pieces that go on the fenders from the shark nose. They are on the car now. Just not when I took the pictures.

[Dozier]

Added fuel rail covers, oil catch can, valve cover breather, strut tower brace, rear strut tower brace, rear tie bar. solid aluminum rear subframe bushings.

http://i19.photobucket.com/albums/b174/dozier1/Picture003-10.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture002-12.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture001-14.jpg