Allmotor D16Z6

[Supraboy87T]

As stated I'm building an allmotor Z6 for my coupe. Go ahead get the laughs out of your systems. I'm doing this for fun since I no longer need to boost aka I got a Supra:ninja::bump:. I want this to have a little pep and still be somewhat daily driveable. I was wondering what #'s to expect out of this build.

Plans:

Head
Bisimoto Vtec Stage 3 cam
Bisimoto Valve springs and retainers
Hondata Intake Gasket
Stock valves with 3 angle valve job
Skunk 2 Intake Manifold w/ gsr throttle body
AEM or Injen CAI
Port and polished head

Block
Bore block to 76mm
D16a pg6 pistons in 76mm bore
Oem Honda rebuild

Cooling
Misimoto Radiator
Mishimoto Hoses
Mishimoto T-stat
Mishimoto Fan Switch
Flex-A-Lite Fan

Fuel
Walboro 255lph
270cc Injectors

Driveterrain
Stage 2 or 3 clutch (Comp Clutch)
Lightweight flywheel 10-12lbs (Comp Clutch)
New axles

Exhaust
Tri-Y header
2.5in piping
Vibrant Muffler
Vibrant Resonator

Suspension
Tein Springs
KYB GR2 Struts
Megan Strut bars
ASR Sub-frame brace
Skunk2 Camber kits
LCA's
Traction Bars
Rear Lower Tie bar
Suspension Techniques sway bars

Car will more than likely have a 50-75 shot.

Looking to make somewhere between 140-160 wph on motor and 200ish with spray. I think it's attainable with said mods.

To all those that will say swap or boost I HAVE A SUPRA I DON'T WANT ANOTHER BOOSTED CAR RIGHT NOW. :tongue1::goodjob:

[Black4DrEK]

What header??

bisi?

[Supraboy87T]

oops forgot exhaust hold on. LOL

[GaGen2Teg]

with those mods im sure you can hit the hp range your looking for...if not more

[Black4DrEK]

DC SPORTS!!!! lol.. man go big or go home..

how you gonna throw that cheap shit on that kind of build??

[Black4DrEK]

Stock throttle body??

nah man!

[GaGen2Teg]

yeah bisi header or tri-y swapshopracing has one...and get a bigger throttle body like a 64mm atleast maybe even a 66mm

[Supraboy87T]

*Sits back with pen in hand.* Don't have 700 for bisi header. link to try y header?

[Black4DrEK]

well im jus sayin.. your buying all this other "bisi" stuff and Skunk2..

Dont Fuck it up.. with a crappy DC header.. Or STOCK throttle body



:2cents:

[Supraboy87T]

Links to suggested parts please. Keeping ac and power steering so that eliminates bisi's header.

[Black4DrEK]

www.google.com

im sorry but i dont feel like lookin up parts for YOUR build... ( not beeing a dick ) just sayin..

Im soo sick of looking at parts!!! uuuhhhhh my build is Enuff for me!!

[GaGen2Teg]

http://www.swapshopracing.com/contents/en-us/d177.html

for the header

[Supraboy87T]

I got it thanks. Any preferences on things I'm unsure of?

[Black4DrEK]

Stock thermostat is fine..
um.. Stock axles are fine.. (life time warranty) autozone

i used a Competition clutch flywheel on my D series..was nice!

[Black4DrEK]

any stage clutch will be fine.. make sure its a good well known company..

^ clutch is really preference on how you wont it to feel in let out..

[Black4DrEK]

Also.. ive allways used Cold air intakes...

and thats allways what my "tuner" has said to use..

[Supraboy87T]

Reps for help.

[Black4DrEK]

HELLZ YEA!!! thanks for that one point... JK man..

Good luck with your build.. hope everything is good..

also that Skunk2 mani is very nice. i used it on my Y8 also..:goodjob:

[-EnVus-]

i need that test pipe back lol

[Supraboy87T]

Don't know how to earn higher rep points and yeah parts collecting ftw.

[Supraboy87T]

You can't have it. lol. Hows it going Jay?

[-EnVus-]

good i dont have the ej1 anymore...you ?

[southside]

Lol I hate collecting parts because when your friends see them they always wanna borrow shit.Let me borrow your mugen this or your rims SMH GET YOUR OWN SHIT!Lol goodluck with your build.Hit up allmotorx he just got done with a SOHC build that JJspec did.

[DustnU]

Sounds like a nice build good luck. I'm trying to build one myself but you DEFF ahve more $$$$ than me for parts. Hope to see it run when your finished.

[Z0_o6]

if i remember correctly you could always just throw a gsr throttle body on there for a cheap way out on that.

[DustnU]

^^^^TRUE!!!! Thats what I'm gonna do.

[Supraboy87T]

good i dont have the ej1 anymore...you ?

Still got the Ej. I'm ordering parts now finally.

Will do DustnU.

Yeah southside I've talked to him but his phone has been off lately. I've been wanting to see it run. He says he needs a tune badly.

Yeah I might go with a GSR throttle body for a little savings. Thanks ID Crisis.

[Black4DrEK]

^^ HHMM
call again.. he got shitty Nextel!!

[-EnVus-]

Still got the Ej. I'm ordering parts now finally.

Will do DustnU.

Yeah southside I've talked to him but his phone has been off lately. I've been wanting to see it run. He says he needs a tune badly.

Yeah I might go with a GSR throttle body for a little savings. Thanks ID Crisis.
i sold the ej1 and i got a ej8 now

[Supraboy87T]

Aight. Let me see pics of said ej8.

[-EnVus-]

Aight. Let me see pics of said ej8.
dont have any pics taken yet but here was the post pics
http://www.importatlanta.com/forums/showthread.php?t=262483

[Supraboy87T]

More opinions/options?

[JDMGRNAV6]

interested on how this turns out!!!

[Supraboy87T]

Changed some parts on the list. Thanks for the help so far guys. Anymore input?

[JDM_p00ky]

there was a guy in new york a friend of mine and he had the same things you did but dont forget an aluminum pulleys they help out aloaem fuel rail, and apex im telling u cuz he had all this things more in his car but you shud b doin good wit wat u tryin to do.. i think u shud go mini-me as well lol d16y7 block d16z6 head.

[88NaCivic]

You get that Dizzy housing put back together?

[Supraboy87T]

Nope. Need a new dizzy 1st. LOL. I want a "new motor" aka all new parts under the hood.

[88NaCivic]

Gotcha' the only way to go..

[DustnU]

heres a few good build ideas.
D16Z6 Bottom
.020 over
P29 Pistons
H Beams w/ARP's
Micro polished Crank balanced to 10K
Eagle block guard
D16Z6 Head
Race Port & Polish
Skunk 2 Valves
Comp Zex Stage 2 Cam w/ springs and retainers
Y8 ported intake
H22 Throttle Body
H22 injectors
AEM cold air intakehttp://images.intellitxt.com/ast/adTypes/2.gif (http://www.d-series.org/forums/#)
Pacesetter Header
Chipped and socketed P28 tuned on CHROME
Full MSD ingnition
Findanza flywheel and clutch
2 1/2'' Stainless exhaust
93 Del sol si Tranny

Motor put down 230 Crank HP/157ft lb at MEOVD engine Dyno in Zanesville.

[DustnU]

should be some help
D16Z6 Bottom end
-D16A6 (PM6 CRX Si) Pistons
-Bored .040 Over (from 75mm to 76mm bores)
-ARP headstuds

D16Y8 Head (from 2000 Civic EX VTEC)
-Crower Stage 2 Cam
-Crower valve springs
-Crower Titanium retainers
-Skunk 2 Pro Series Intake Manifold
-2 layer head gasket
-AEM Adj. Cam gear
-B16 Throttle boddy (58mm)
-B16 Intake arm
-Apex'i Power Intake
-DC Sports 4-1 Headers
-2.5 inch mandrel Exhaust with 22" resonator, SNL Twin Loop

Tuned by Church, I put down 144whp, and 122 wtq.
Quote:
d16z6 block pinned and bored to 75mm
75mm PM7 pistons
B18b rods resized,polished, then shot-peened
d16z6 crank balanced to above to 9k, allen plugs in crank throw oil gally's
My d16y8 cylinder head that was posted here w/ fresh 3 angle
59300 camshaft
crower springs
CBR 1000rr itb's
310cc prelude injectors
msd coil factory ignition
arp hardware where available
acl Race series bearings
"the old one" oil pump mods
made 172@7400 on 103 and 164@7253 on pump 93
all done on less than $1,000......so y swap?
:D:D:D

[Black4DrEK]

^^ good one D !!

[Supraboy87T]

That's what I said to the noob. And that's some nice builds you found there dustnu

[DustnU]

^^^^no problem bro someone helped me i just did the same. we'll have to run when we finish up prolly be a close one. GL

[i4_garage]

i got that single cam Bisi header for the low low LMK!!!

http://c4.ac-images.myspacecdn.com/images01/67/l_1f3906b4f5d0d08ee27cddc9887f7b5f.jpg

[DustnU]

i got that single cam Bisi header for the low low LMK!!!

http://c4.ac-images.myspacecdn.com/images01/67/l_1f3906b4f5d0d08ee27cddc9887f7b5f.jpg

how much you talkin bout??

[Supraboy87T]

Second that how much?

[allmotorX]

Dc sports is not a bad header especially for a d-series all you would have to do is change the collector to a bigger size like a 2.5. Also getting a throttle body bigger than 60mm your going to loose a shit load of trq especially on a n/a d. Im running a stock one and i can pretty much guarantee ill make more than 130wtq

[Supraboy87T]

Word. Thanks again man. I wanna see that beast run already.

[cm7k24]

i like this, its different

[smote]

There is no need for the fuel rail and stock injectors are good for around 190ish whp.

[Supraboy87T]

Thanks

[Supraboy87T]

Back up. More input anyone?

[allmotorX]

What else you want to know?

[Supraboy87T]

Use stock z6 tranny or swap for a newer ex tranny aka (out of a ek)? Isn't gearing different? And stuff in the op in parentheses.

[Starrfire]

same gearing, forks are made of different materials is about the only difference.

[Supraboy87T]

Oh ok.

[allmotorX]

^you figured out what cam you going with?

[allmotorX]

more motivation http://www.youtube.com/watch?v=huGfShnqqXE

[slostang]

more motivation http://www.youtube.com/watch?v=huGfShnqqXE

holy shit

[allmotorX]

^lol less than 1500 put into the whole car if not less

[112480]

more motivation http://www.youtube.com/watch?v=huGfShnqqXE

IMPRESSIVE!:goodjob:

[cpearson]

Acquired any of the parts for said build yet? Or is it just in the planning stages?

[Starrfire]

Yeah you got any toys yet?

[Supraboy87T]

Just ordered my try y header and thinking what I want to order next.

[allmotorX]

What cam?

[Supraboy87T]

Going with bisi level 2.3 Nitrous duty cam.

[cpearson]

Nice header. I'm building my Z6 now; just sanding the block, head, and valve cover now; prepping them for some paint.

[Supraboy87T]

I'm thinking bout doing that after everythingis sent to the machine shop and then gets back to me. But IDK yet.

[Jdm94Coupe]

im not laughing at you or trying to be an ass. but y not just turbo it w/ a super 60 or something. gonna be around the same price if you are buying all this bisi and skunk2 parts, etc........

[Supraboy87T]

1st post. I have my dream car. It's boosted. I don't care to own more than 1 boosted car right now. School plus 2 different projects and a dd is enough for me.

[Starrfire]

Well, I'm just gonna say that I've had an all motor Y8 before. Had most good things D guys want.

Eagle rods
srp 10.5:1 pistons
Crower stage 2 cam
Edelbrock performer IM
DC sports tri y header
Skunk2 exhaust
Short ram intake
Underdrive pullies
performance plus throttle body
hondata s200


I must say I'm very happy with my gsr's and B20/vtec and h2b if that tells you what direction I went with all motor.

[Supraboy87T]

LOL I hear you. But I've always kinda wanted to build a D-series all motor just for shits and giggles. It's great to see peoples faces when you beat them and they have a B-series and you got a littlle ole D-series.

[Starrfire]

^^^Well, there will only be a select group you beat. Maybe bolt on guys...Maybe.

[Supraboy87T]

It'd make me happy. Then once I get beat I'll go home with my tail between my legs and get the supra to boost my ego. LOL

[Jdm94Coupe]

It'd make me happy. Then once I get beat I'll go home with my tail between my legs and get the supra to boost my ego. LOL

or u could just put all that money in the supra now and save yourself the headache........

[allmotorX]

Doesn't really cost much to build a lil d

[Jdm94Coupe]

Doesn't really cost much to build a lil d

i see i see....

[allmotorX]

But I do wish I went boost instead

[Jdm94Coupe]

But I do wish I went boost instead

turbo sohc ftw! lol

[Supraboy87T]

I need to finish this project and now that I actually have a plan and know what I wanna do I'm gonna stick with it.

[Patterson]

do it. i've been messing with D's for quite some time. its fun just seeing what they will hold. my fastest one so far has been 12.80's and that was a LONG time ago when you could pick them up all day for $200. good luck with it

[Supraboy87T]

^Thanks man. I am gonna be aiming for low 13's since it's a full weight coupe without slicks.

[Starrfire]

Well what do you think you will trap then? I trap 108 on street tires and having to roll off the line.

[Supraboy87T]

I think I'll trap somewhere between 105-107 with a good tune and learn to drive it well. It's not on the 1st page for the build but the car will be on spray.

[allmotorX]

Yea me to^:ninja:

[Starrfire]

I think I'll trap somewhere between 105-107 with a good tune and learn to drive it well. It's not on the 1st page for the build but the car will be on spray.

There is probably no way you will trap that high. You might be able to squeeze enough experience and technique to get all you can out of mid 90's. But 105-107 has the potential speed to be a mid 12. I don't think that will happen but just call me a pessimist.

If you never get your hopes up, then you can never be let down. At least that is how I view things. Here is what I would expect out of it if I were you. Less power, less Mph, and slower speeds. Then when maybe you break out of one of those categories you will be surprised.

Que Sera Sera

[Supraboy87T]

That's what I've been told and researched that I could possible make. I don't care what I make on the quater mile I just wanna hit my hp goal in all honesty. Thanks for your input man I appreciate others views and opinions. I just need to hurry up and get it done now that I finally got the damn motor out, been waiting to make time from work and school to pull it and finally did on Monday. Now I gotta get all the parts ordered and send it off to the machine shop. Have them reassemble it and get it to a shop for a tune. It's been out of the game for a year now and I wanna bring it back in a big way, well for me it will be atleast, so we'll see how it goes.

[88NaCivic]

Godd Luck brutha, I wunna see it when ya get it finished!!

[allmotorX]

There is probably no way you will trap that high. You might be able to squeeze enough experience and technique to get all you can out of mid 90's. But 105-107 has the potential speed to be a mid 12. I don't think that will happen but just call me a pessimist.

If you never get your hopes up, then you can never be let down. At least that is how I view things. Here is what I would expect out of it if I were you. Less power, less Mph, and slower speeds. Then when maybe you break out of one of those categories you will be surprised.

Que Sera Sera
With spray he should be in that trap speed range being a good driver or what not

[Supraboy87T]

Thanks Chris. I'll definitely let you see it. I need to meet up with you one day and see bout you polishing my si's and how much that would run me. And I knew you would chime in Lester. LOL

[Starrfire]

With spray he should be in that trap speed range being a good driver or what not


Well that's not all motor then lol. But your statement would be correct.

[Patterson]

with a full dress street car if your not afraid to push it a little mid to low 13's should not be a problem. The axle's were my weakest point after a 13.2 in my street dress with slicks.

Spray the house down. :D

[Supraboy87T]

So it is possible. Thanks man. I see you lurking in here. LOL

[Starrfire]

I need to run slicks. I can probably run a low 12. Just been too lazy to buy them lol. But what kind of time frame are you looking at to getting this thing down the track?

[Supraboy87T]

Hope to have it done this summer. As for track time idk yet. Lol. gotta work around school and the job.

[Supraboy87T]

Might have someone hooking me up with some parts so we'll see what happens. If he comes through it might get done by May. :taun::yes::ninja:

[Supraboy87T]

Ordered some parts today. Will upload pictures later tonight or tomorrow. Sent head to machine shop to have all the head work done.

[allmotorX]

get-er-done

[Catnip]

LOL I hear you. But I've always kinda wanted to build a D-series all motor just for shits and giggles. It's great to see peoples faces when you beat them and they have a B-series and you got a littlle ole D-series.

Good luck with a daily drive-able NA d-series in a full weight coupe on street tires that you plan on beating B-series cars with...

[Supraboy87T]

That's what I plan on doing. We'll see what happens later this summer when it all comes together.

[Supraboy87T]

Thought I would share some pictures of parts I got laying around.
Cooling thanks to Mishimoto. Waiting on fan switch and thermostat.
http://i44.tinypic.com/ohtppz.jpg
http://i39.tinypic.com/207t5qo.jpg
Next up KYB GR-2's with Tein S Tech Springs Thanks mccoy1178
http://i44.tinypic.com/zx4rph.jpg
Few polished pieces done by 88Nacivic
http://i44.tinypic.com/15rf59k.jpg
Skunk2 Cam Gear
http://i44.tinypic.com/ajwfn6.jpg
Mmm Bisimoto Cam I wonder what stage it is?:ninja:
http://i41.tinypic.com/dbpk0n.jpg
The nasty bay. I need to get this ready before the motor gets back from the machine shop.
http://i40.tinypic.com/2uzw6xs.jpg
Hmm what's that yellow bottle in the trunk?
http://i41.tinypic.com/3091tdx.jpg

[SoLJames95]

Scuba tank full of Oxygen. :lmao:

[allmotorX]

Get we done

[Supraboy87T]

Yeah oxygen thats it. Lol.

[allmotorX]

Typo

[allmotorX]

Where's the other cam

[Supraboy87T]

Other cam?! Get that dual cam stuff outta here. SOHC FTW. Even though I do have a dual cam car and a quad cam car sitting outside too.

[Supraboy87T]

Good retainer on the left bad one on the right. That bastard just wouldn't seat properly.:2up: Should have another retainer early next week I hope.

[allmotorX]

Lol sorry wrong thread

[DustnU]

man I guess your about done huh? I wanna see it run when your ready. I let the SOHC's go and went DOHC. More power less money and time. Good luck

[Starrfire]

What brand are those retainers? So I never buy them.

[Supraboy87T]

They are bisimoto retainers. So I'm pretty pissed that I had a problem but they are correcting it so it's all good. It should be up and running soon. I'll gladly let anyone that wants to see it run. I can't wait to see it run myself but i kind of have too.

[Patterson]

They are bisimoto retainers. So I'm pretty pissed that I had a problem but they are correcting it so it's all good. It should be up and running soon. I'll gladly let anyone that wants to drive it down the strip.

i'm in for this... :D can i get 1st pass? lol

[Supraboy87T]

You know you can if you help me get that scuba tank mounted and run up front. Lol. I gotta learn how to use that bottle now don't I? Why not learn from someone who has done it to a couple of single cams in the past.

[Patterson]

lets do it. i can't do mine right now so........:burnout:

[Jdm94Coupe]

what machine shop do you use?

[Theycall_Metue]

i still think sohc all motor is still a waste but the build looks good
what this going in?

[Supraboy87T]

It's Goza Machine Sop in Acworth and this build is going back into my EJ1. It has 219985 miles on it. Thought it could use a rebuild and a little modification. :yes::super:

[Theycall_Metue]

:goodjob: hate how some people put a built motor in a ugly ass car.
theres a different between a sleeper and a hunk of junk :goodjob:
post some picture after your done dropping it in

[allmotorX]

More pics

[Supraboy87T]

Here are a few pictures of when I started pulling the motor.
http://i46.tinypic.com/mbtpcm.jpg
http://i47.tinypic.com/2v2zhw6.jpg
http://i50.tinypic.com/2hf3s6d.jpg
http://i45.tinypic.com/2rejgo7.jpg
http://i50.tinypic.com/i2t06w.jpg
http://i48.tinypic.com/28ipzip.jpg

[88NaCivic]

Nice job! I'd like to see it when you get er' finished...

[Supraboy87T]

I'm working on it man. My retainer that I have been waiting on is in transit to me. It should be here before the weekend. Then I'll go pick up all my parts from the machine shop. I'm also busy selling my parts Supra and getting ready to start saving up funds for my Supra build.

[allmotorX]

Purple nurples

[Supraboy87T]

LOL.

[Supraboy87T]

Got my stuff back from the machine shop.
1st up Skunk2 Intake Manifold
http://i46.tinypic.com/16g9z4.jpg
PG6 Pistons 76mm bore
http://i45.tinypic.com/2jc7a7t.jpg
Next up the head. Port and Polish, 3 angle valve job, Bisimoto Springs and retainers
http://i48.tinypic.com/j6k22v.jpg
Intake side
http://i48.tinypic.com/ok1oqs.jpg
Exhaust
http://i47.tinypic.com/o8i5a0.jpg
From above
http://i45.tinypic.com/b9giv8.jpg
Looking at valve work and it's been milled .020
http://i47.tinypic.com/256tslv.jpg
Then crank thats been balanced to 11,000rpm
http://i49.tinypic.com/2hfukyb.jpg
The block thats been bored to 76mm or .040 over hot tanked and acid bath
http://i50.tinypic.com/1qrf3n.jpg
Looking into Cylinder Walls
http://i50.tinypic.com/28a1734.jpg

[allmotorX]

paint the block purple lol damn i miss mine now!

[Supraboy87T]

You would say paint it purple. Want me to paint the head purple as well? LOL

[allmotorX]

would be nice!!!

[Supraboy87T]

So who wants to run when this thing is back in the car and running? I'd like to run some NA B-series when its done to see if I beat y'all like I'm hoping to do:taun:. Lester you don't count so don't ask you and your gangster build :2up:.

[allmotorX]

What build:thinking:

[Black4DrEK]

Damn i miss the Z6 to les!! damn fuckers stole that shit!

[Supraboy87T]

It'd be nice if he got that back. I'm gonna rep mine in memory of his. Fvck theives. Long live the SOHC.

[allmotorX]

Rock on^^^

[Black4DrEK]

Yea.. it will be fun man!



Ill run you, when my hatch is done..

[allmotorX]

ill run you mike!! h vs b wassup

[Supraboy87T]

What's going to be done to the hatch? I'll run you Les on same conditions I mentioned before.

[allmotorX]

me on bottle you off right?

[Supraboy87T]

Think you might have that a little backwards. LOL.

[allmotorX]

oh yea forgot

[Black4DrEK]

ill run you mike!! h vs b wassup

:ninja: HAHAH> LOL


What's going to be done to the hatch? I'll run you Les on same conditions I mentioned before.

Just a B with bolt ons really...:goodjob:

[Supraboy87T]

D>H>K>B All I gotta say. LOL

[allmotorX]

where's the k?

[Supraboy87T]

Got some more parts in the last two weeks. Not to much longer till this beast will be up and running :yes::boobies: Who's down for some friendly runs when she is up and running?

[FasTech]

Got some more parts in the last two weeks. Not to much longer till this beast will be up and running :yes::boobies: Who's down for some friendly runs when she is up and running?

Oh me me.... (raises hand)! lol.

[Supraboy87T]

I'm down what are you gonna run me in FasTech? Do you wanna run me on or off the bottle or both? I want to see how this build stacks up against other builds. Especially B-series swapped civic's.

[Red_EJ1]

ill run ya.. gotta built n/a d

[CaTcH22]

ill run ya.. gotta built n/a d

ITS FINALLY DONE! jk

[Red_EJ1]

lol you funny

[Supraboy87T]

I wish I was done. Had to fix my daily last month so there went my build money for that month and I have been spending cash on my Supra lately which is expensive as fvck. Need to focus back on the Civic now that things are back in order.

[Eman_jDm]

how much longer before it hits the streets???

[Supraboy87T]

Just depends on how things go. If I can focus on the Civic instead of the Supra very soon. But it is very had to do that with your dream car in the garage and free time to work on the small things that bug me. Civic needs clutch, injectors, exhaust, throttle body, intake manifold gasket, CAI, head gasket and ARP hardware, Flex-a-Lite fan, Motor mounts, and that's about it to get it running.

[Supraboy87T]

Well I'm getting ready to move the shell and motor to my girls house that way I have a garage to work in (outside in my driveway isn't cutting it.) I'm thinking about doing a brake line tuck and painting and shaving the bay. Can anyone recommend me places or people to do the work at a reasonable price?

[jcs]

i dont know if you have talked to vteckidd but he has a d series header that resembles the bisi,im sure it flows hella good,should check it out..

[Supraboy87T]

Nah I haven't talked to him personally but I have read up on his header. If I can verify (see it in person) that I can keep my ac and ps with his header I might just get it.

[Red_EJ1]

This beast ready yet.. lol, ready to see two na ds go at it

[Supraboy87T]

Nah it isn't ready yet. Lol. I've been busy with moving, work, and working on that other damn project. I hope I can find some extra cash so I can finish the build. I wanna setup a few runs. What do you have man? ^

[Red_EJ1]

Just a high comp d

[Supraboy87T]

^You have pm.

[Supraboy87T]

What size exhaust should I run with said setup? 2 1/4 in or 2 1/2 in?

[allmotorX]

2.5 is what I was running

[Starrfire]

2.25 will be fine with a D but if you feel the need go ahead and get 2.5". It's not like you will be moving a huge amount of air. I'm curious to see what it makes. hurry up dude!

[DustnU]

I say 2.5 for a good "D" build, more in and more out = POWER!!!!

[Starrfire]

^^^Not gonna be really that much in and out for less than 150 whp.

[allmotorX]

I made 130 on my z6 with no vtec and wasnt done tuning and my cam wasnt near as aggressive as his

[Supraboy87T]

Thanks guys. I'm trying my hardest to do it up right the 1st time so I'm very particular with what I buy and make sure I get it for the right price. Plus with helping my girl out at our new place, helping my mom and sister at their place, and working all the time I don't hardly see the civic let alone work on it. Anyone wanna come reinstall my suspension on the driverside so I can tow it? Lol

[Supraboy87T]

Well it looks like I'll be getting my transmission back form the shop tomorrow. That's one more thing off my very large check list. It's coming together guys stay tuned. Next up shaved and tucked bay while I get the motor assembled.

[Starrfire]

I just bought all the parts to put in an inline fuel filter and use a stainless line for the clutch. But mine is rhd so i needed a custom length for the clutch line.
This may help because it did for me
http://6thgearadvertising.com/civic-eg/viewtopic.php?t=7858&sid=f44bbfd6487957b968133c767f8aaee2

[Supraboy87T]

Thanks man. I hadn't even thought bout tucking/removing the fuel filter and replacing with a in line. Should be picking up some RC370cc injectors this weekend if they haven't sold yet.

[Supraboy87T]

UPDATE. I got the suspension back in yesterday. I still need parts to finish the motor and have it assembled. Tranny has been rebuilt and awaiting pickup at the shop. I need someone to tuck and shave my engine bay if you know anyone that does good work I'm all ears.

[hondaxpurt]

I did a similar build and made 157 whp and 121 wtq. i was quite dissapointed when i realized how much money i had spent vs how much power i got.

[Supraboy87T]

I know it won't make an incredible amount of power but if I make anywhere near 160whp I'll be more than happy. I have my supra that'll make the big numbers for me.

[FasTech]

I'm down what are you gonna run me in FasTech? Do you wanna run me on or off the bottle or both? I want to see how this build stacks up against other builds. Especially B-series swapped civic's.


Just a completely stock Foxbody. :ninja:


Hella late response I know.

[Supraboy87T]

I'd be down.

[FasTech]

I'd be down.


Well when you're done, LMK. I just got my gears in yesterday, so I'll be at the track soon.

[Supraboy87T]

I wanna get this done asap. I need injectors, head gasket, ARP studs, intake manifold gasket, exhaust, axles, intake, motor mounts, and have motor clayed and assembled. If you can help or have parts for sale for a D-series Pm me.

[Jdm94Coupe]

u shouldve bought my exhaust...... but nice build you have. i wanna be like you when i grow up!

[Supraboy87T]

Lol. I would like to have a 400whp D-series one day. I'll stick to below 170whp for now and leave the big numbers for my supra.

[FasTech]

Lol. I would like to have a 400whp D-series one day. I'll stick to below 170whp for now and leave the big numbers for my supra.

Lmk when you wanna bring the supra out too. LOL. I'll run you as is with my shitty trans but wait to long and my powerglide/trans brake will be in. I move fast because I want this car done before my baby gets here. Well, at least as close to done as I can get. lol.

[Supraboy87T]

My supra is no where near done lol. It just sits in the garage waiting to be in the limelight. I started the civic build 1st so that gets my attention and completion 1st. However I have been working on restoring the interior on the supra in my spare time. Removing 24yr old plastic without damaging it is a real pita. Sourcing the maroon interior I have is another problem as well even though everyone in the mk3 community gets rid of it.

[r0nin]

i need to find the link my friend sent me. 800 whp built z6.

[Supraboy87T]

Sounds like Bisi's wagon.

[Supraboy87T]

Started cleaning her up the other day after sitting outside for 2yrs. She is so damn dirty. In about 1 week I should be able to tow her over to my girls garage and be able to pull more stuff out of the bay clean and repaint parts. Anyone every swapped their power steering racks for an integra rack? I've read it helps a lot with the turning radius.

[Supraboy87T]

Here she is in the garage finally.
http://i55.tinypic.com/s2h7co.jpg
Yes I know there is slight frame damage on driverside.
This is the nasty that has accumulated over the last 2yrs.
http://i56.tinypic.com/332ccb5.jpg http://i54.tinypic.com/5mmjp5.jpg http://i52.tinypic.com/21nljig.jpg
What is the interior at the moment.
http://i53.tinypic.com/2dl4qky.jpg
Got some work ahead but at least I have a decent place to work on her now.

[Supraboy87T]

One last pic as I get back to work on it.
http://i51.tinypic.com/34oujps.jpg

[Supraboy87T]

Well the interior is pretty clean now the 2yrs of nasty is gone off most of the parts. I still need a few interior pieces so I can restore it back to mint stock condition. Will post up some more pictures once I find the cable for my digital camera. Progress being made thank god.

[Berta]

I always took the power steering out and changed to the manual racks with my setups. Change the sub frame(power to manual sub frame) out as well, so you dont have to rig on bolting down the passenger side of the rack to the frame. If you have both the frame and racks next to each other, then you will see the difference. Looks way better in the engine bay and i had no problem with turns or control..

[Supraboy87T]

Keeping all my creature conforts as this will be my "daily" after it's done. Thanks for the info on subframe swap with it though forogt bout that if I do it.

[coreypel07]

So all in all how much do you have into this little guy? Also ill run you with the scooter that should be fun lol

[Supraboy87T]

More than enough Corey. Lol brake line tuck to start this weekend and wire harness after that.

[Supraboy87T]

Woohoo for updates and pictures later tonight.

[Jdm94Coupe]

About time, lol jk..... Im thinking bout building a 500whp non vtec sohc, what u think?

[Supraboy87T]

Do it Twan. I'd like to see that personally. Sorry no pics last night I was too busy working and hanging out with family. Tonight though I promise.

[Supraboy87T]

Bwahahaha change of directions! Car is being parted out if you want anything LMK.

[Jdm94Coupe]

pm me everything u got motor wise.....