View Full Version : BLOX B16, B17, B18C1,C5 (STAGE 3) CAMS
RHD_Joe
11-10-2009, 10:11 PM
SOLD!!!!!!
Black4DrEK
11-10-2009, 10:22 PM
GL man!
VTACCC!!!
RHD_Joe
11-10-2009, 10:34 PM
thanks
4DrTeg
11-10-2009, 10:44 PM
nice cams man..GLWS
JDMGRNAV6
11-10-2009, 10:46 PM
i can hear it hitting now baaaaaaaaWHAAAAAAAA
greasemunkey
11-10-2009, 10:48 PM
do you have the springs and retainers recommended for the cams?
RHD_Joe
11-10-2009, 10:55 PM
Yes BLOX recommends but does not say you have to have upgraded springs and retainers to run these cams. But they are aggressive cams much like the crowed 404s
greasemunkey
11-10-2009, 11:10 PM
so i would be ok to run these without upgraded valvetrain as long as I leave my redline the stock then?
RHD_Joe
11-10-2009, 11:15 PM
Yes As far as I have read from blox you would. I ran them in a b16 for a couple of weeks and I was fine
greasemunkey
11-10-2009, 11:22 PM
nvm i was wrong after doing research, it is not ok to run stock valvetrain.
RHD_Joe
11-10-2009, 11:53 PM
I ran them in a SIR 2 with OEM dual valve springs on both intake and exhaust. Didn't have a problem.
marcos713
11-11-2009, 12:46 AM
GLWS man good price!
RHD_Joe
11-11-2009, 07:35 AM
Thanks
PrOjEk_EJ
11-11-2009, 08:10 AM
pm me bottom dollar
RHD_Joe
11-11-2009, 08:51 AM
Pm'd
r_Senik
11-11-2009, 09:46 AM
damn good price.
RHD_Joe
11-11-2009, 09:48 AM
Thanks
gerardojdm
11-11-2009, 11:34 AM
greal deal. GLWS
jadakid88
11-11-2009, 12:06 PM
he's mostly getting at him not having dual valve springs
I ran them in a SIR 2 with OEM dual valve springs on both intake and exhaust. Didn't have a problem.
RHD_Joe
11-11-2009, 07:45 PM
Yeah I know. Thanks
RHD_Joe
11-12-2009, 08:35 AM
All PMs replied
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.