thangcu35
11-03-2009, 12:56 PM
I have a set of bluetop rods with custom machining to bore out the rods journal to work with hi-comp pistons. If you have always wanted affordable high compression setup for your bluetop without buying the red-top crank and rods, then this is it. You get the lighter internals + high compression for the best combination. This is done professionally at a reputable machine shop (which cost me quite a bit). Hi-comp pistons are made by Clevite. Used for about 6000 miles before I installed GZE pistons to turbo. Rings will be included. There are some minor scoring on top of 1 piston, but should not affect anything.
I want $100 for the rods and pistons + rings & pins.
$50 more and I will include an excellent condition bluetop crankshaft that I used with those pistons. No scorings on journals either.
http://img688.imageshack.us/img688/8561/img0454z.jpg
Just dust on the far left journal
http://img40.imageshack.us/img40/7466/img0455x.jpg
http://img40.imageshack.us/img40/4258/img0456pr.jpg
I want $100 for the rods and pistons + rings & pins.
$50 more and I will include an excellent condition bluetop crankshaft that I used with those pistons. No scorings on journals either.
http://img688.imageshack.us/img688/8561/img0454z.jpg
Just dust on the far left journal
http://img40.imageshack.us/img40/7466/img0455x.jpg
http://img40.imageshack.us/img40/4258/img0456pr.jpg