What's your car's status?

[AnthonyF]

What's the status on your whip(s)? Waiting on parts? Almost done? Ready to ride out?

Mines up for sale so I can get a car again. w00t w00t.

(poll is for jokes)

-Ant.

[Repiks]

The 63' is getting disc brakes put on, so it's in pieces in my garage.

The Lightning is always ready.

And the bikes, well, it's a crap shoot really. Who knows.

[bowdown201]

Lulz...Why I gotta be skinny?

Well I ust traded the Bimmer so now I have a lil somethin to work with again. Ill prolly just make it a little quicker than it is now and just ride so im not dumping too much money into a car right now

[Mk3 VR6]

well.. i broke a axle and this other part
bought a axle.
until i get the other part, its sitting in my driveway :cry:

[whatever210]

wheres the i beat the hell out of my car and dont give a fuck cause i just rebuild it opition?

[btstone]

my shit is always broken

[Mk3 VR6]

my shit is always broken

:lmfao: same here mane.. dang!

[Mk3 VR6]

wheres the i beat the hell out of my car and dont give a fuck cause i just rebuild it opition?


:lmfao: :lmfao: :lmfao:

[AnthonyF]

Ahhh bring KF together...feels so good. :)

Thacker said u be skinny bowdown. Don't u know what he says, goes?

-Ant.

[TIGERJC]

Hoping it does not let go on the dyno again, if it does I am trading it in for a Evo x

[punkr6]

waiting on new turbo, ups says it will be here tomorrow...

[NEMO]

should be getting my friction plate in today for my flywheel. then i should be ready soon

[whatever210]

:lmfao: :lmfao: :lmfao:
sadly im not kidding

[JJSPEC Racing]

Where's the "let's race now because my car is going under the knife(er welder) in the next few months for upgrades" option?

[slostang]

waiting for tax time.

[The Ren]

The mustang just got fixed and the supra is down waiting on a water pump, serpentine belt, and a 2nd turbo (but is up for sale in current condition).

[David88vert]

Mustang is about to go in for paint, everything else is good, just need some seat time in it.

[S2KJD]

im happy with where im at although ill actually "never" be done!

want drilled and slotted rotors, mugen HT, dual exhaust converted to single, and supercharger...then i may be done :D

[BluesClues]

Well, seeing as my car is all show and no go right now. I have somethings I am working on, but without the proper funds it's hard to even get started. Plus I also have to replace and fix things on the car already. Money is mainly my issue right now

[btstone]

im happy with where im at although ill actually "never" be done!

want drilled and slotted rotors, mugen HT, dual exhaust converted to single, and supercharger...then i may be done :D

i would advise to leave car stock!

[S2KJD]

i would advise to leave car stock!

:thinking:

[bowdown201]

How are you fuckers voting more than once?

[NEMO]

How are you fuckers voting more than once?
you could have pick more than 1 answer :doh:

[bowdown201]

Poll owned me :headslap:

[NEMO]

Poll owned me :headslap:
:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao: :tongue1:

[WTF?]

tranny and cv axle are finally fixed, so im ready to ride out

[slostang]

Pole owned me :headslap:
according to thacker you say that alot. :lmfao:

[91boostdgsr]

just waiting on some time off and some dyno/tune time

[FAM0U5]

need thicker head gasket installing arp head studs... reinstall the meth kit and TUNE!!!!!!!!!!!!

[On_Her_Face]

Ready to race, and too slow to race.

[SmackedInATL]

Will be race ready Sunday night....btstone where you at?

[btstone]

if you wanna run sunday night call me. ill drag your ass at the southside meet

[AnthonyF]

How are you fuckers voting more than once?
HAHAHAHAH

multiple choice owns you.

-Ant.

[bowdown201]

HAHAHAHAH

multiple choice owns you.

-Ant.

:2up::2up::2up::2up:

[EL42]

im happy with where im at although ill actually "never" be done!

what he said

[SmackedInATL]

if you wanna run sunday night call me. ill drag your ass at the southside meet

Bitch you have your ass a race.

[DarKStaR]

hopefully sending the new block off this week to be bored and then just swap all the internals over and go retune....

Then sale my truck and get a friend of mines hatch to DD

[Schroeder]

My car just smoke checked the fan controller and I'm still waiting on a hood. Hopefully in the next two months I will have my 8.8 9" bearing conversion and 31 spline axles installed as well.

[Evil Goat]

my trucks in the driveway with a fresh oil change waiting to be hooked to the trailor and the car's in the garage waiting to be put on the trailer.

can't wait for next friday....gonna try to lower my single shot time since it's a little cooler out ;)

[GAtegs]

* For Sale.

[03RCode]

I fail to see the "Ballin' outta control, hasn't been washed in 6 months" option.

[Arm&hammer]

my car is sitting in my garage waiting for me to buy the few last parts i need and finish it up. It also has a b18c1 and you guys don't want any. lol jk.

[TheSnail]

Broken, being parted out, building new car

[NEMO]

well fuck, the wrong part shipped to me today. so now i have to wait for the right one to be shipped

[JJSPEC Racing]

my car is sitting in my garage waiting for me to buy the few last parts i need and finish it up. It also has a b18c1 and you guys don't want any. lol jk.
That's right, dont want none! I pulled the B18C1 out of my car and put a D16Z6 in it and ran low elevens:D.

[btstone]

Bitch you have your ass a race.

Lol. I have myself a victory.

[OnURleft]

Still waiting for the software so I can run Alpha-N (i.e no maf) for my carbon intake manifold/intake. Should be epic

[Arm&hammer]

That's right, dont want none! I pulled the B18C1 out of my car and put a D16Z6 in it and ran low elevens:D.

I pulled the blown up d16z6 and put a b18c1 so it can sit there and look pretty.

[JJSPEC Racing]

I pulled the blown up d16z6 and put a b18c1 so it can sit there and look pretty.

Awesome! Cant wait to see it run.

[Arm&hammer]

Awesome! Cant wait to see it run.

me too lol. Should be ready to start next weekend then it's getting painted and boosted.

[Incontt]

mine is ready to rock and roll. MCE day on the 21st at sdr will rock!

[JJSPEC Racing]

I plan on going to MCE day to watch and maybe make a few fun runs. Cant wait to see some nice muscle cars.

[Stol3n]

I voted 4 times.

just sayin. :ninja:

[Evil Goat]

I plan on going to MCE day to put a whoopin' on some muscle cars

fixed :D

[Sammich]

WHERE IS THE WAITING ON MONEY OPTION? I'M TRYING TO GET THESE SIDE SKIRTS FROM THIS GUY. BESIDES THAT I NEED NEW REAR CALIPERS AND WANT TO DO THE FRONT BRAKE UPGRADE W/ SS BRAKE LINES ALL THE WAY AROUND W/ THE FRONT STILLEN LIP AND STAGGERED WHEELS...THEN WORK ON GETTING THE SOUNDS RIGHT ON THE INSIDE...I'M FAR FROM DONE AND FAR FROM 'WAITING ON PARTS'

[AnthonyF]

:2up::2up::2up::2up:

I wub joo. ;) No homo. Aight... 2.9% homo but THAT'S it.

-Ant.

[Sammich]

^ 2UP YOURS ANTONIO BANDERAS

[Incontt]

I plan on going to MCE day to watch and maybe make a few fun runs. Cant wait to see some nice muscle cars.

mce has everything from rice to mullets...thats whats so cool!

[Hunter02SS]

Waiting on my 3 fuel filters to arrive today so I can re-assemble my fuel system.

[Repiks]

mine is ready to rock and roll. MCE day on the 21st at sdr will rock!

Hells yeah
:goodjob::goodjob:

[QKJUICEDPONY]

Mine are asleep in the garage.

Mustang got new wheels this week and I couldn't have the Lightning getting jealous so it got something too!

[DeeAOne]

gathering parts for the swap. almost ready to start but i know it will take longer than expected.

[secondgencamaro]

I need balancer, water pump, thermostat, belt tensioner, alternator, alternator bracket, idler pulley, power steering pump, power steering reservoir, power steering pulley, power steering hoses, all kinds of bolts, starter, flexplate, pilot spacer, electric fuel pump, fuel pressure regulator, radiator hoses, quarterpanel, and who knows what little odds and ends will come up in the meantime. Lots'o'shit.

[AnthonyF]

Got quite a few "downers" I know the feeling. Shit gets old. Good luck to all in getting your shit back together properly.

-Ant.

[efman]

how about spun a rod bearing and is in the garage in a million parts

[n00bsrus]

waiting on tons of parts for the mini.... new switch box, new compressor, new valves, new paint (this spring), new rims, a tune, and a turbo lol.... its probably gonna be a minute on this one.... :-(

[allmotorX]

Mine was working for about 15min then cam locked up and bent exhaust valves so now i have to send the camshaft off to get repaired and buy a few other things to get it back running again. What a yr

[southside]

Mine was working for about 15min then cam locked up and bent exhaust valves so now i have to send the camshaft off to get repaired and buy a few other things to get it back running again. What a yrYou and me both have had sucky year at least your car has seen the road.:DMines seen the top of my driveway thats about it.SMH damn old ass cars new ass swap and people that dont know how to do wire tucks cough cough.

[allmotorX]

You and me both have had sucky year at least your car has seen the road.:DMines seen the top of my driveway thats about it.SMH damn old ass cars new ass swap and people that dont know how to do wire tucks cough cough.LOl yea i should have kept my crx this shit is depressing as hell. Next car is a mini van:bump:

[AnthonyF]

Truck runs but will be fore sale in a week for good. Hopefully I can sell her ASAP.

Bike will be down tonight to get some new parts installed over winter. w00t w00t. More show than go...but that's what I like.

-Ant.

[gforce71]

* For Sale.

ready to race now... :D

[4DRGSR]

I have a 70,xxx mile gs-r sedan in perfect shape that has taken over 10k from my wallet, yet always needs just ONE MORE PART to be finished, FML!

[Just_CHill]

Parts are waiting to be installed and then I am ready to race once I get some drag radials or slicks.

[JJSPEC Racing]

Got to finish my wife's car, then the resurection will begin...

[AnthonyF]

Last part is in for my truck, now I can sell it and move on to my next toy.... :ninja:

Might have 4 cylinders...might have 10. ;)

-Ant.

[QKJUICEDPONY]

JACKSTANDS......All through my garage

[SmackedInATL]

JACKSTANDS......All through my garage

Hurry the fuck up.:crazy:

[Evil Goat]

still sitting in the garage ready to race....

gonna do the 8.0 index race at mnd jan 2nd and then it goes down for a little while

[QKJUICEDPONY]

Hurry the fuck up.:crazy:


You don't wanna experience what you did in august!


:idb:

I KID


I made good room today and got most of mine put back together.Got some wiring to finish and a few small things and we are done with it.

[Mrs.Vtecace23]

Work in progress! Got to order some parts.

[AnthonyF]

Actually has more off than in the picture but, you get the gist. Going bare frame to do some custom work.

http://i168.photobucket.com/albums/u180/TRYMY40/DSCN0769.jpg

-Ant.

[Psycho]

Breaking in the engine on the mr2...

[Slomaro Z28]

mine is gone, waiting on taxes to get something else.

[PSINXS]

my car performance wise is basically done. im just waiting on money to get it back running. ned new wiring harness. all i gotta buy is a turbo and cam gears, and retune. then its finished. ill do visuals progressively. dont matter cuz i dont race anymore

[gastroker]

engine is out. Getting everything inspected. New rings should be here today. Should be putting her back together in about 2-3 weeks.

[Psycho]

back in the shop lol
oil leak

[Member31410]

My Neon broke 167,000 miles last week after a California road trip.

[gforce71]

in the body shop... damn miata's hatin on me

[SPOOLIN]

waiting on engine harness to come back to me and new fuel pumps.

[RUFFIAN]

my shit is always broken
X10:rolleyes:

[AnthonyF]

My Neon broke 167,000 miles last week after a California road trip.
Does it still run 11's? :goodjob:

My engine is about to be dropped out of the bike.

-Ant.

[-S Double C-]

waiting on engine harness to come back to me and new fuel pumps.

dont tell me you got a chasebays harness there fucking garbage

[LIKEG6]

I should be ready to visit the KF more often after february.

[Member31410]

Does it still run 11's? :goodjob:

My engine is about to be dropped out of the bike.

-Ant.

Back in October during Import Face Off, I pulled a 12.0 @ 118 with a 100 lb. heavier race weight.

[NJSC]

my status is totaled, and waiting on the DMV to get me a title so I can get my insurance check and get a vdub

[KevinT707]

Wrecked the CRX in November. After sitting around for awhile .. hoping to get it back from the body shop this week fixed + brand new paint job!

-Swapping a GSR/LSD (hydro) tranny very soon

[GGPIS3]

Hoping it does not let go on the dyno again, if it does I am trading it in for a Evo x

who's building your motor>|}

[GGPIS3]

oh and my turbo has leaking seals... fun times. i make cars disappear that are behind me.

[On_Her_Face]

Back in October during Import Face Off, I pulled a 12.0 @ 118 with a 100 lb. heavier race weight.

That's awesome Ming or atleast I think so...

[skacore]

balla status

[Evolunchbox]

i make cars disappear that are behind me.

The good thing is that they are behind you:cheers:

Status of the lunchbox = :ninja:

[4eyedbox]

My rods finally came in today and are now with my engine. Work and class keep me from being able to do anything towards installing them until at least Saturday.



oh and my turbo has leaking seals... fun times. i make cars disappear that are behind me.

Spy Hunter:D

[GGPIS3]

The good thing is that they are behind you:cheers:

Status of the lunchbox = :ninja:


lol... i guess you're right if the reason they are disappearing is because im just too damn quick. however, the real reason isn't due to power and speed, but in actuality, it's due to a smoke screen that is left behind after i go into boost. just today, i made an escalade disasppear on buford hwy. lol

[metro larev]

im still wating on parts and i did this like three months ago it seems

[punkr6]

got my remote start installed today, great for cold winter mornings....

[RJ's325ITS]

I got the EBC installed today, and ready to go to the Dyno again; last Friday I did 508whp at 15psi, I should beat my last dyno of 521whp soon.......

[h22 jones]

The all motor hatch is ready to race hell it gets drove every day and the other hatch is in a thousand pieces i have everything to build it but motivation lol.

[AnthonyF]

Dropped off my R6 engine for valve adjustments and a race head gasket to heighten the compression a tad. ;) :ninja:

-Ant.