PDA

View Full Version : Don't ya hate teasers...BMW prOn'ish.



speedminded
10-22-2009, 11:56 PM
Hacked Canon XTI

50mm
f/5.6
ISO3200
Handheld

http://i35.tinypic.com/10yl5km.png

swollix
10-23-2009, 12:04 AM
M52 E30... why no S50/S52?

speedminded
10-23-2009, 12:19 AM
M52 E30... why no S50/S52?Can't push 25psi through a stock s52 ;)

Oz10
10-23-2009, 12:21 AM
baaaallliiiinn. Hell yeah!

swollix
10-23-2009, 12:28 AM
Can't push 25psi through a stock s52 ;)


Ahhh true, thought you were going the usual route and keeping it N/A. Who will be doing the work?

speedminded
10-23-2009, 12:34 AM
Ahhh true, thought you were going the usual route and keeping it N/A. Who will be doing the work?uh, me...lol. I just took the pic 5 minutes before posting it. It's gonna be n/a until I sell some of my cars and get some more camera gear...specifically a full frame body. I can make money off a new camera...can't make money, err much :ninja:, off a turbo lol!

I'm still debating on full standalone or a hacked DME...price is about the same but can't make changes with the DME unless I take it back to the same place and have it retuned and reburned.

speedminded
10-23-2009, 06:04 AM
In.

swollix
10-23-2009, 08:19 AM
No one knows what they are looking at on here... It isn't a b-series or K, lol.

Sammich
10-23-2009, 08:19 AM
GAY THREAD, POST MORE PICS OR YOUR DEATH IS IMMINENT

Elbow
10-23-2009, 08:33 AM
I thought you were keeping it stock? lol

chuck
10-23-2009, 11:24 AM
pictures look good as always...i'm still too BMW illiterate to have any idea exactly what i'm looking it.

whats the downside to the stand alone set-up??

Hundo®
10-23-2009, 11:34 AM
yawn.

nice pictures though.

eg mike
10-23-2009, 11:35 AM
No one knows what they are looking at on here... It isn't a b-series or K, lol.



Yeah I know right stupid people...

Wait what is this again? haha I don't know so what..

Elbow
10-23-2009, 12:25 PM
yawn.

nice pictures though.

You drive a 350Z...your car isn't even slightly quick. :lmfao::lmfao::lmfao::lmfao:

speedminded
10-23-2009, 12:33 PM
Just as an example, here's a stock M52 with a GT42 in an e36 with full leather interior that weighs 700lbs more than my car. The car is eased off the line because BMW's are prone to tearing the subframe off the chassis...yet it still traps 140 mph.

10.8 @ 137 mph
http://www.youtube.com/watch?v=neKNuwKGrq4

10.28 @ 145.77 mph
http://www.youtube.com/watch?v=kFWi7hI9kqA

He purposely blew that engine on the dyno to see what it was capable of...25psi @ 704whp before bending a rod. It runs 9's now with a built m52 making high 99Xwhp lol!



I thought you were keeping it stock? lolWho said that? lol! I'm gonna keep the exterior 100% stock for now, big bumpers and all, bottle caps, with good tires. Then just slightly lowered with springs and shocks. Will be looking for a chassis to build the wide body hatch with. :ninja:

e30pwr
10-23-2009, 01:54 PM
Whats the lighting used in the shot? lol

good choice over the s52 if your pushing boost with no work.

OG-Skinny
10-23-2009, 02:09 PM
IT only took you more than a YEAR!! lulz.

speedminded
10-23-2009, 02:09 PM
Whats the lighting used in the shot? lol

good choice over the s52 if your pushing boost with no work.Fluorescent light fixture with an opaque panel that works as a diffuser haha!


IT only took you more than a YEAR!! lulz.Helps having an engine hoist and the mounts lol!

OG-Skinny
10-23-2009, 02:13 PM
Helps having an engine hoist and the mounts lol!

Also helps getting off your ASS! put the laptop away for a day and you can get things done! :crazy:

matthewAPM
10-23-2009, 02:13 PM
damn its about time. lol

speedminded
10-23-2009, 02:29 PM
Also helps getting off your ASS! put the laptop away for a day and you can get things done! :crazy:uhh...my income comes from the computer lol! Not to mention when I did have access to an engine hoist (that didn't roll anyways lol) I didn't have engine mounts. Then when I got engine mounts I didn't have a hoist...kinda hard to lift a 450lb engine 4 feet in the air without a hoist or a tree to hang it from. :crazy:

awestun
10-23-2009, 06:03 PM
No one knows what they are looking at on here... It isn't a b-series or K, lol.
no one?

swollix
10-23-2009, 07:20 PM
no one?

You know what I meant. Don't act so ignorant. Truth is that there are few people on here knowledgeable enough to appreciate what he is doing...

EJ25RUN
10-23-2009, 07:22 PM
I wish it was still the 6 series.

speedminded
10-23-2009, 07:27 PM
I wish it was still the 6 series.e24 6-series with a S62 e39 M5 V8 would be mighty fine if i say so myself :yumyum:

bdydrpdmazda
10-23-2009, 07:30 PM
GAY THREAD, POST MORE PICS OR YOUR DEATH IS IMMINENT
leave it to sammich

awestun
10-23-2009, 07:31 PM
You know what I meant. Don't act so ignorant. Truth is that there are few people on here knowledgeable enough to appreciate what he is doing...
I'm not. And that is true. I personally know how hard it is to swap an m5x/s5x motor into an e30. Even gathering parts for it is tough.

speedminded
10-23-2009, 07:41 PM
I'm not. And that is true. I personally know how hard it is to swap an m5x/s5x motor into an e30. Even gathering parts for it is tough.He's just saying the general population has no clue about BMW's on here...other then "they're expensive". Honestly it's not that difficult or that expensive. I've just been taking my time buying and trading parts as I go so theoretically this car isn't costing me anything. Being "unemployed" twice in the past year doesn't help either lol! I've made back about 75% of what I have put into it though, will be 100% if I sell a few more parts I have acquired since starting the project...or I'll just trade those for something else I need or want on the car lol!

Sure I could go out and pay a shop $5k to do the swap including an M50/52 but what's the fun in that?! The big money will be getting the turbo going...then after that a custom body i've had practically every square inch designed & planned out for the past year lol! I'm positive I'll be getting a new shell for that to build it from scratch...

swollix
10-23-2009, 07:49 PM
Sure I could go out and pay a shop $5k to do the swap including an M50/52 but what's the fun in that?! The big money will be getting the turbo going...then after that a custom body i've had practically every square inch designed & planned out for the past year lol! I'm positive I'll be getting a new shell for that to build it from scratch...


Lol, I didn't have the time or resources to do the swap on my M3, but I did have the cash so I paid TRM $5,200 or so to do it for me. Looks OEM,lol.

http://farm4.static.flickr.com/3099/3380957908_3aaf06363d_o.jpg

speedminded
10-23-2009, 07:53 PM
Lol, I didn't have the time or resources to do the swap on my M3, but I did have the cash so I paid TRM $5,200 or so to do it for me. Looks OEM,lol.

http://farm4.static.flickr.com/3099/3380957908_3aaf06363d_o.jpgAny BMW engine in any BMW looks OEM lol! And they all fit in each other using OEM parts. People think Honda's are lego's...ha!

It's so beautiful...e36 s62.
http://www.youtube.com/watch?v=BNXxburJwJM

That engine in an e46 would be amazing.

e30pwr
10-23-2009, 08:37 PM
Lol, I didn't have the time or resources to do the swap on my M3, but I did have the cash so I paid TRM $5,200 or so to do it for me. Looked OEM,lol.


IA seems more entertained with four cylinders than anything else, let alone bmw swaps. either way i'd love to see the full build and what all is in store

BAD SS
10-23-2009, 09:33 PM
Hell yes.

RBS
10-23-2009, 09:36 PM
my mom has that same oil cap ..



nice pics

Cool Cat Racing
10-23-2009, 09:36 PM
damn its about time. lol

I was gonna say the same thing. This has been a long time coming to say the least.

Elbow
10-23-2009, 09:37 PM
Can't go wrong with a BMW V6.

Bigt8aford
10-23-2009, 10:16 PM
Wow, a lot of information sprung from this picture. Any how, looks like you got something serious going down here. Iwish you the best of luck with your build, keep us updated.

swollix
10-23-2009, 11:56 PM
Can't go wrong with a BMW V6.

What the fuck... did you JUST say V6?!? :no:

speedminded
10-24-2009, 12:10 AM
What the fuck... did you JUST say V6?!? :no:You're ruining his fun...it'll take a BMW owner to catch that one lolol!

swollix
10-24-2009, 12:14 AM
You're ruining his fun...it'll take a BMW owner to catch that one lolol!

Oh my bad, I like the FWD 3-series. They are just adorable. :gay:

Tech_Queen
10-24-2009, 12:29 AM
Motor looks really good guy! I know it will be an amazing car once you get all your money together by selling stuff you no longer need.

Elbow
10-24-2009, 07:43 AM
Oh my bad, I like the FWD 3-series. They are just adorable. :gay:

Yeah the 318TI's are FWD 1.8 4 cylinders, similar to a B18.

silversol
10-24-2009, 11:37 AM
SO WHEN IS IT GOING TO RUN?

Slomaro Z28
10-24-2009, 12:58 PM
Can't go wrong with a BMW V6.


You're ruining his fun...it'll take a BMW owner to catch that one lolol!

Not a BMW owner, but clearly a inline 6.

awestun
10-24-2009, 01:09 PM
hah he is a bmw owner. twas a joke.

murderrsiren
10-24-2009, 01:10 PM
siiiick!

EJ25RUN
10-24-2009, 02:05 PM
Can't go wrong with a BMW V6.

this one flew over too many heads. lol

speedminded
10-24-2009, 07:07 PM
oh dear god. As I'm taking a break from cleaning my engine bay with a toothbrush I run into this pic *sigh*

95alty
10-25-2009, 10:45 AM
LOL im just seeing this thread and it takes a few BMW owners to get together and be assholes to the honda boys with 4 bangers... lol @ V6 that was one of those look up in the sky and wonder what flew by jokes...

MAD respect for this work of beauty its coming along nicely.

Elbow
10-25-2009, 10:49 AM
Jeeeeeeezzzzzzzzz that's clean.

It's making me want to do a swap.

Repiks
10-25-2009, 11:07 AM
Damn, this thread makes me feel so car illiterate.

BMW's are something I literally have no idea about.


But those links with numbers are quite impressive. And the pictures are amazing.