gsr rebuild kit?

[marcos713]

ok well im about to start buying the stuff i need for my build but other than the JE pistons and eagle rods, im not sure where to start. does any1 know of any place that sells rebuild kits? ebay any good? or would it be better to buy everything OEM. im going boost after the build so what head gasket should i use?

also how much am i looking to spend on honing my block?

thanks for input in advance!:goodjob:

[RBS]

honda

[marcos713]

honda


are you saying go to honda for a rebuild kit? if so, i went there before looking for some random bolts i needed and they sent me away to the acura dealership b/c hondas dont come with GSRs...and acura doesnt sell the whole kit. they sell the top gaskets as 1 set and the bottom 1s as another set..
im just wanting to see if any1 knows of any place whee they sell the whole kit as 1.

[Black4DrEK]

Ive seen a good bit of rebuild kits online..

Just search for them on the web...

[marcos713]

Ive seen a good bit of rebuild kits online..

Just search for them on the web...

yea ive been looking around, just wanted to see if any has any recommendations.

[Black4DrEK]

Well if you want 100% quality i say OEM..

Or just try to find a NICE reputal company for the kit..

You deff dont want a shitty kit or you will be REBUILDING that thing again.. lol

GL mayne!

[marcos713]

Well if you want 100% quality i say OEM..

Or just try to find a NICE reputal company for the kit..

You deff dont want a shitty kit or you will be REBUILDING that thing again.. lol

GL mayne!

lol wudnt want that to happen!!

i found this site but dont know how reputable it is...im not planning to use to the head gasket and pistons and rods. i'l prolly part those out.
http://www.rpmmachine.com/engine-rebuild-kits-acura.shtml
seems like a good site IMO, any1 ever heard or used this site before?

[J-ROCK]

looks like a good setup but id go with honda bearings IMO cause they are so much better

[SlamminCRX]

i bought a kit on ebay one time that came with acl bearings and nippon piston rings, kit worked great, motor ran great and it didnt leak or anything, but like everyone else say either honda or a good reputable brand.

[dallasb84]

i bought all my stuff from eristic gaskets on ebay.....

the gasket kits are very good.... especially for 40 bux.

acl bearings are nice too

i bought ebay water pump and oil pump...

pretty much all ebay parts and i saved a bundle..... good quality if you ask me

[dallasb84]

i see you rollin areound in marietta marco....

i drive an all black 98 civic...... i usually see you on austell or south cobb

[dallasb84]

oem head gasket should work just fine..... but cometic is good

[Barefoot]

honda or better only if u want to go boost

[Allshow97]

Internal Engine Parts in Austell sells rebuild kits. I believe topline is the brand?!?!? I put one in my prelude a couple years ago and the build was solid. The only thing I didn't get from them was the bearings I went with ACL bearings from KTeller.

Just a suggestion if you looking for somewhere local.

[marcos713]

Internal Engine Parts in Austell sells rebuild kits. I believe topline is the brand?!?!? I put one in my prelude a couple years ago and the build was solid. The only thing I didn't get from them was the bearings I went with ACL bearings from KTeller.

Just a suggestion if you looking for somewhere local.

o wow i work up the street from there on thorton rd and never noticed that place, im going to check it out today hopefully. thanks man:goodjob:


i see you rollin areound in marietta marco....

i drive an all black 98 civic...... i usually see you on austell or south cobb

yea i live by windy hill and south cobb. i take austell to go to work and alot of my friends live off austell. any pics of your civic? might have seen you as well just may not have payed attention.

[SlamminCRX]

i bought all my stuff from eristic gaskets on ebay.....

the gasket kits are very good.... especially for 40 bux.

acl bearings are nice too

i bought ebay water pump and oil pump...

pretty much all ebay parts and i saved a bundle..... good quality if you ask me

+1 mine was an eristick gasket kit too

[91boostdgsr]

summitt has the whoel complete kit top end pistons head gasket EVERYTHING you need for 1600 i priced it for my GSR rebuild and its made by eagle

[marcos713]

summitt has the whoel complete kit top end pistons head gasket EVERYTHING you need for 1600 i priced it for my GSR rebuild and its made by eagle

:eek: man if i had 1600 to spend on a rebuild kit i'd be ballin lol. im down for using the cheapest stuff out there wow 1600...too much for me...
thanks for the input tho. :goodjob:

[dallasb84]

man i rebuilt me motor for less than that

[marcos713]

^how much did you spend? I knw I'm looking at over 1k just want a rough estimate