PDA

View Full Version : got 2 problem with da teg


StarBwoy
10-09-2009, 10:02 PM
1.wheel nut stud is f**k up and need it out to put new 1 in. cant find out how to take it out.



2. problem. my car has too much oil in it so i look at my sparks plugs and there oil in it :( need help on what i should do
georgieboi
10-09-2009, 10:10 PM
you need a new valve cover gasket and spark plug gasket... and you have to pull the hub apart or go ahead and replace it...
Barefoot
10-10-2009, 01:41 AM
1.wheel nut stud is f**k up and need it out to put new 1 in. cant find out how to take it out.



2. problem. my car has too much oil in it so i look at my sparks plugs and there oil in it :( need help on what i should do 1, u will need to brake the stud to get it out the easy way. them to reinstall do this http://www.youtube.com/watch?v=JAcMwPCI6a0

2. the leak is because your tube seal are bad. if u take some grey sealant on there it should fix it as long as the seals arent in pieces.
silverDA
10-10-2009, 07:48 AM
if you have a DA that video is useless,you have to take the whole arm off and have studs/bearing pressed out and back in/
jadakid88
10-10-2009, 08:28 AM
yerp...
if you have a DA that video is useless,you have to take the whole arm off and have studs/bearing pressed out and back in/
Barefoot
10-10-2009, 12:02 PM
if you have a DA that video is useless,you have to take the whole arm off and have studs/bearing pressed out and back in/lol get a eg problem solved.
silverDA
10-10-2009, 12:06 PM
why not get a ford/
Barefoot
10-10-2009, 12:12 PM
why not get a ford/
lol they are shit. take my word.