PDA

View Full Version : Lowered at the "V"


chaseamundo
10-07-2009, 11:42 AM
Idk if i posted in wrong place but this seems most accurate to me...
move if needed.

So i recently went the lowest on my car than i ever have before and their is no way in hell i could take a speed bump. not at all possible!

So i was wondering if anyone has this issue and if i went to the "V" how the frig would i get in the parking lot?

Thanks,
TokinBongz
10-07-2009, 11:48 AM
General Tech section ? A lot of scraping if you're real slammed. How slammed are we talking about ? Dragging soda cans slammed?
oneSLOWex
10-07-2009, 11:48 AM
Idk if i posted in wrong place but this seems most accurate to me...
move if needed.

So i recently went the lowest on my car than i ever have before and their is no way in hell i could take a speed bump. not at all possible!

So i was wondering if anyone has this issue and if i went to the "V" how the frig would i get in the parking lot?

Thanks,

If you cant drive it....why the hell would you want to lower it that much?
oneSLOWex
10-07-2009, 11:49 AM
General Tech section ? A lot of scraping if you're real slammed. How slammed are we talking about ? Dragging soda cans slammed?

unless hes pushing notebook paper he can get in the V....carefully
chaseamundo
10-07-2009, 11:49 AM
i can drive it no problem, but my header is the problem everytime i bump etc. and i dont think i cld take a speed bump unless i had a shit ton of room
TokinBongz
10-07-2009, 11:51 AM
If you cant drive it....why the hell would you want to lower it that much?

Quote for truth!
chaseamundo
10-07-2009, 11:53 AM
Quote for truth!



Aham, i can drive it....how would be my easiest route is my question
oneSLOWex
10-07-2009, 11:56 AM
Aham, i can drive it....how would be my easiest route is my question

for reals....if its that much of a problem...raise it back up...it cant be fun having to worry about stuff like that.
TokinBongz
10-07-2009, 11:59 AM
Idk if i posted in wrong place but this seems most accurate to me...
move if needed.

So i recently went the lowest on my car than i ever have before and their is no way in hell i could take a speed bump. not at all possible!

So i was wondering if anyone has this issue and if i went to the "V" how the frig would i get in the parking lot?

Thanks,


Aham, i can drive it....how would be my easiest route is my question

Now i don't really understand your question. Easiest route as in navigating the parking lot with out scraping ? I was there last night to pick up some parts. I went in my boys slammed DA, scrapped mudflaps and cat. I guess it depends on your set up.
chaseamundo
10-07-2009, 12:01 PM
like i remember one way their are speed bumps...can you go in a side entrance or back way? with no speed bumps?
The Youngn
10-07-2009, 12:05 PM
Go over the speed bump straight so your wheels will prevent the header from being scraped. Just go slow so that you won't land hard on the sides. Smartest thing to do is just raise it back up though
N/A EK
10-07-2009, 12:05 PM
My EK is pretty low too and i get around the speed bumps pretty easy... You always have room to get around them.
chaseamundo
10-07-2009, 12:05 PM
then what about my exhaust?
N/A EK
10-07-2009, 12:17 PM
Just go down Ponce De leon Ave. and enter right there...you dont have to worry about speed bumps.


http://i657.photobucket.com/albums/uu299/DB8gsrr/VARSITY.jpg
Black4DrEK
10-07-2009, 12:28 PM
this thread = :gay: IMO

just drive the damn thing around... Why are you asking "us" about YOU driving YOUR car????

you will be fine.. DO YOU
oneSLOWex
10-07-2009, 12:34 PM
Just go down Ponce De leon Ave. and enter right there...you dont have to worry about speed bumps.


http://i657.photobucket.com/albums/uu299/DB8gsrr/VARSITY.jpg

LMAO nice map
jr4mny
10-07-2009, 01:00 PM
x2 on the map lol!!!!!
chaseamundo
10-07-2009, 03:29 PM
thanks slo ex!!!!!
-EnVus-
10-07-2009, 03:33 PM
im going to go install some speed breakers just as yall get in the lot then lets see the fun begin as ppl try to leave lol
Austin?
10-07-2009, 03:36 PM
,,,,,,,, no comment
chaseamundo
10-07-2009, 03:38 PM
what the F are speed breakers?
-EnVus-
10-07-2009, 03:39 PM
what the F are speed breakers?
them big ass rubber things with yellow lines lol
-EnVus-
10-07-2009, 03:41 PM
http://i33.tinypic.com/1565yrs.jpg
chaseamundo
10-07-2009, 03:42 PM
OH FUCK THAT!
i wouldnt even attempt , id justt break down into a ball and start crying

:lmfao:
-EnVus-
10-07-2009, 03:44 PM
OH FUCK THAT!
i wouldnt even attempt , id justt break down into a ball and start crying

:lmfao:
OR find a way out and around them and charge ppl to get in a line to use it:lmfao::lmfao::lmfao:
chaseamundo
10-07-2009, 03:45 PM
now in that case....your goin to hell lol
-EnVus-
10-07-2009, 03:46 PM
now in that case....your goin to hell lol
with my pockets full cause ppl gotta get home:D
chaseamundo
10-07-2009, 03:47 PM
True....


....so worth it
02SloWrx
10-07-2009, 06:16 PM
If you cant drive it....why the hell would you want to lower it that much?

So people can look at his car and say wow thats low. :gay:
chaseamundo
10-07-2009, 06:22 PM
So people can look at his car and say wow thats low. :gay:

uhm sure.... haha guess thats part of it... call it a lifestyle :lmao:
NOCLUE
10-08-2009, 11:37 AM
My eg slammed i was ok no rubbing just go slow
chaseamundo
10-08-2009, 05:18 PM
is taht your car in your sig?

the slammed one?
twiztid cc
10-08-2009, 05:34 PM
The map is going to be your best bet.Leave that same way atl streets are ftmfl.
chaseamundo
10-08-2009, 06:09 PM
The map is going to be your best bet.Leave that same way atl streets are ftmfl.


i will....the hard part is finding out how to get on that road. their all damn 1 ways
xdavidscenex
10-08-2009, 07:54 PM
:locked:im not understanding why you have to ask how to drive a lowered honda.. just raise it up get in tthe parking lot and slam it down or gt aribags if you want to touch the ground?
chaseamundo
10-08-2009, 10:16 PM
im not asking how to drive it.
im asking the EASIEST way in for low cars. not "lowered" but LOW....