B series in eg questions.......?????

[big mac]

Okay here's the deal. I had a built boosted ls vtec in my old ej8. I'm going to swap that I'm to my eg now. I know I'm going to need mounts and intercooler piping for the eg. My questions are will the axles of the ej8 work on the eg chasis? Will the shift linkage or the ej8 work on eg? Any help or tips to help me with me questions will be repped!

[getherdone]

yes the axels and shift linkage will work. i think the piping may also work but not sure about that part

[big mac]

Okay thank you man just wanted to male sure before I ordered parts. Hahah. I think I may have to work with the piping to make it fit snugly behide the bumper


Repped

[jcs]

yep it works....

[J-ROCK]

evrything will bolt up perfect and is you motor obd1 or 2 cause you may need a jumper harness depending on what ecu you run!

[Barefoot]

:goodjob::goodjob:
yep it works....

[big mac]

I'm using the same ecu and harness from my last car. P72 with obd2 to obd1 jumper harness. It maybe the other way around I forgot lol

[J-ROCK]

I'm using the same ecu and harness from my last car. P72 with obd2 to obd1 jumper harness. It maybe the other way around I forgot lol

lol alright just making sure lol didnt want you to do all that work mto get nothing out the ecu

[big mac]

Lol that would suck but thanks bro.

[Starrfire]

well now you don't have to step down to obd1 since the car will already be obd1.
Axles and shift linkage work the same, no problems there. Just finding mounts and a rear L bracket.

[NoWAyItZTOMmY]

you cant use your old engine harness because its obd2.

its 1 piece straight to the ecu, where obd1 plug up at the shock tower

[blue_lude_91]

all things work and youre lucky cause your eg is an obd1 car! :)

[ls-r teg]

sell the jumper harness engine harness and get wire it up for obd1

[Master Shake]

in most cases the eg and ej are the same body styles. 92-95. from everything i've done, just about all the parts will swap out.

[big mac]

Mine old one was a 99 though