HELLA FLUSH OR TOO MUCH POKE?

[CHADbee]

got my spacer/adapters or whatever you want to call them in....i have gotten mixed reviews on the fitment. some say its flush and some say the rear sticks out too much.

so i went out today and shot some pics just say IA could vote :D


1
http://www.chadbeephotography.com/BLAZER/83hiwide2done.jpg


2
http://www.chadbeephotography.com/BLAZER/83backDONE.jpg


3
http://www.chadbeephotography.com/BLAZER/83widewheeldone.jpg


4
http://www.chadbeephotography.com/BLAZER/83fitment1done.jpg


5
http://www.chadbeephotography.com/BLAZER/83rig3done.jpg

[-EnVus-]

Looks fine to me good job

[Logan]

Well there isn't any poke really at all.

I think you're doing it right though, it looks good!

[CHADbee]

Well there isn't any poke really at all.

I think you're doing it right though, it looks good!

its weird cause of the way the rear is shaped and it has such a "taper" toward the bottom, it sits nice at the top of the fender but toward the bottom it sticks out.

a few people said i should have went with a smaller spacer in the rear...

[Logan]

It looks pretty on-point to me.

You don't see to many blazers with proper wheel fitment!

+reps

[yungdz]

its weird cause of the way the rear is shaped and it has such a "taper" toward the bottom, it sits nice at the top of the fender but toward the bottom it sticks out.

a few people said i should have went with a smaller spacer in the rear...


no, it flows well with the body lines from the top. If it didnt poke out on the bottom it would look awkward

[CHADbee]

It looks pretty on-point to me.

You don't see to many blazers with proper wheel fitment!

+reps
yeah most people that own these/s10's have really bad fitment LOL


no, it flows well with the body lines from the top. If it didnt poke out on the bottom it would look awkward
think about how it looked for the past week with the rear wheels sunk in 2 inches from where they are now :doh:

[.blank cd]

I like that last pic dude!

[CHADbee]

I like that last pic dude!

yeah the rig shot came out pretty good! the whole shoot went super smooth untill i locked my keys in the blazer while it was running.

it wouldnt be a chadbee photography shoot without epic fail :(

i swear im cursed.

[dallasb84]

your tires are not stretched so you should not be sayin hella flush. its like a white boy yellin *igga in queensbridge

[.blank cd]

yeah the rig shot came out pretty good! the whole shoot went super smooth untill i locked my keys in the blazer while it was running.

it wouldnt be a chadbee photography shoot without epic fail :(

i swear im cursed.LOL I saw your FB status. Always somethin with you! :crazy:. Howd you get em out?

[CHADbee]

your tires are not stretched so you should not be sayin hella flush. its like a white boy yellin *igga in queensbridge
i know i should have went with 195/35/20 tires :cry:

LOL I saw your FB status. Always somethin with you! :crazy:. Howd you get em out?
i know, i cant get away from bullshit, it happens almost every time i shoot.

i had my friend that there with my truck and my other friend took me back to the house to get my spare key lol

[Catnip]

has fitment like a camaro/firebird with bigger wheels now, rather than a mini-truck





Needless to say...
:goodjob:
lol

[sprix!]

It looks good.
When most people say flush around these parts it typically means poorly fitting and/or improper tire sizes with a good chance of retarded negative camber. Your truck has none of the above symptoms.
Well done.

[Kamikaze]

I think it looks good. :goodjob:

[bdydrpdmazda]

Its far from hella flush. Its looks good though.

[yerrow]

i see no poke, but looks good

[swollix]

poke?

[SouthrnStyle]

Ditch the spare and the side molding and bumber and put sierra chrome moldings on it and paint your calipers and leafs black and anything else that is showing thats rusty.

[uproot]

everything in your first post looks great

[alexly]

Do not "beaner" it out and "pop" those wheels. It's on it's way to being a nice truck, keep it up.

[bloodline]

its sittin righttt!! nice job bro..you accomplished something i never got to do with my blazer lol

[Black4DrEK]

looks good

[boostedb16]

yeah most people that own these/s10's have really bad fitment LOL


think about how it looked for the past week with the rear wheels sunk in 2 inches from where they are now :doh:so there are other people with S-10 blazers lol j/k. but if thats as low as your going with it, it looks awesome but if your planning on going lower or putting bags on it then you may want them in a little more. oh and as always "pic's look great".

[CHADbee]

has fitment like a camaro/firebird with bigger wheels now, rather than a mini-truck

Needless to say...
:goodjob:
lol
yeah i wanted to stay away from the fitment you see most trucks have lol


It looks good.
When most people say flush around these parts it typically means poorly fitting and/or improper tire sizes with a good chance of retarded negative camber. Your truck has none of the above symptoms.
Well done.
thank you!

I think it looks good. :goodjob:
:boobies:

Its far from hella flush. Its looks good though.
yeah the hella flush thing was more of joke lol thank you


i see no poke, but looks good
thats good....i dont like poke lol

poke?
poop?

Ditch the spare and the side molding and bumber and put sierra chrome moldings on it and paint your calipers and leafs black and anything else that is showing thats rusty.
the spare didnt bother be at all untill i used my flashes and did a rear shot LOL cause other wise you cant see it! the side moldings are staying cause they go with the look of the truck, they match the wheels perfectly. i know, i need to just get new rotors and paint the calipers and all that rusty shit. its not AS noticeable in person but the flashes just bring it out :cry:

everything in your first post looks great
thank you sir

Do not "beaner" it out and "pop" those wheels. It's on it's way to being a nice truck, keep it up.
im in no way trying to do that lol but i had a couple people tell me thats how it looks now, thats why i made a poll

its sittin righttt!! nice job bro..you accomplished something i never got to do with my blazer lol
thank you!

looks good
thanks

so there are other people with S-10 blazers lol j/k. but if thats as low as your going with it, it looks awesome but if your planning on going lower or putting bags on it then you may want them in a little more. oh and as always "pic's look great".
yeahh this is as low as im going....i like my nice ride and the only way im going lower than this and it still ride nice is to bag it. if im going to spend 3K+ on this truck its going to be a V8 swap.

[bdydrpdmazda]

^^^holy long post chadbee, bag that shit, the 4.3 is the shit. you could probably bag it and swap it for not much more than 3,000. bags for 1,000 and that leaves 2,000 for the swap, sounds doable if you do it all yourself

[CHADbee]

^^^holy long post chadbee, bag that shit, the 4.3 is the shit. you could probably bag it and swap it for not much more than 3,000. bags for 1,000 and that leaves 2,000 for the swap, sounds doable if you do it all yourself

i <3 multiquote :lmao:

not doable for me right now :cry: maybe next summer i will atleast be able to do a 5.3 swap. yeah the 4.3 is an amazing motor, im a huge fan of it but sometimes the truck is too damn sluggish when it comes to getting out in traffic and whatnot. i would get alot better gas mileage as well because the 4.3 is straining to pull the truck, i could tell a difference in gas mileage and the peppy-ness of it after the heavy ass rims :(

[PURP]

yuck.... that's gross Chad... little less camber next time

lolol....

[CHADbee]

yuck.... that's gross Chad... little less camber next time

lolol....

imma get this bitch riding on the sidewalls just for you lol

[Kevykev]

looks right

[Black4DrEK]

yea i would deff. rock this as a DD!! reps to you

[PURP]

imma get this bitch riding on the sidewalls just for you lol

hahaha.... It looks good man. But I had to vote for the option that was not getting any action...lol... Keep it up homie. +24

[cm7k24]

i like it

[csmiths]

looks awesome chad

[trdmatrixxrs]

looks good, I'd try to remove the rear wiper though. Overall looks dam good for a Blazer

[wanggsticky]

it look aite,
don't look bad at all

[blue_lude_91]

i like your blazer alot dude

[Kckouki]

Nice ass blazer. Ive got those wheels on my S10.

[roscoe]

lookin good!

[vancem3m3]

ok

[VQ35 Star]

I don't see anything wrong with them? they look perfect!
Now shave that rear wiper!

[jadakid88]

very nice chad

[CHADbee]

hahaha.... It looks good man. But I had to vote for the option that was not getting any action...lol... Keep it up homie. +24
hater :lmao:

i like it
thanks

looks awesome chad
appreciate it homie...i would try to get on your fitment level but it just aint happening lol

looks good, I'd try to remove the rear wiper though. Overall looks dam good for a Blazer
in the next few months i want to shave the rear wiper, roof rack and antenna :goodjob:

it look aite,
don't look bad at all
im so alright with that lol it is a blazer lol

i like your blazer alot dude
something you dont read on IA often :boobies:

Nice ass blazer. Ive got those wheels on my S10.
in black/chrome lip?

lookin good!
thank you

ok
im happy with it :dunno:

I don't see anything wrong with them? they look perfect!
Now shave that rear wiper!
thanks

very nice chad
:cheers:

[Ericp]

Blazers lookin good man, makes me sorta miss my old S-10 :goodjob:

[CHADbee]

Blazers lookin good man, makes me sorta miss my old S-10 :goodjob:
thanks eric. let me know whats up with import faceoff and we can ride out like some true G's :lmao:

[Brian*]

Looks damn good. Drop an LS1 in it and we will be good to go lol

[Dylan]

it looks just fine to me.its not out of place at all.very clean

[Echonova]

I approve.



/thread.

[Genji-Sama]

Hands down sickest blazer I've ever seen.

[CHADbee]

Looks damn good. Drop an LS1 in it and we will be good to go lol
too much $ for what you get. im thinking 5.3 vortec or 6.0 LQ4...hopefully next summer


it looks just fine to me.its not out of place at all.very clean
thanks man

I approve.



/thread.
LOL thanks dude :cheers:

Hands down sickest blazer I've ever seen.
thanks man, i know its different that what most people are used to seeing but i tried to do my best with it.

[Kckouki]

http://i125.photobucket.com/albums/p61/kornothekob/S10/018-1.jpg

I kinda wish I got black with a chrome lip, because everyones got this color.
Truck looks alot different now, lower, spacers, stepside bed, painted hood.

[Kckouki]

Blazer looks sick as fuck though man

[.:Stirfry:.]

i think its looks good as fluck!:.
id leave it just like that:..
reps

[CHADbee]

I kinda wish I got black with a chrome lip, because everyones got this color.
Truck looks alot different now, lower, spacers, stepside bed, painted hood.

yeah i dont think i have seen anybody else with the black ones. i have seen quite a few people with the grey and some with all chrome but i guess truck guys dont like black wheels :dunno:

[GirlieZ]

hella flush!

[khan351]

looks great :cheers:

[CHADbee]

hella flush!

you like dat dontcha guh...you wanna ryde wit a playa huh :lmao:

[scott00si]

looks good man:goodjob:

[bdydrpdmazda]

did i mention that you need to bag that shit?

[Sammich]

its neither...its just nice whoever said its hella flush or too much poke should be shot. if u wanted flush...i think another 8mm or so would give u the flush fitment

[secondgencamaro]

its weird cause of the way the rear is shaped and it has such a "taper" toward the bottom, it sits nice at the top of the fender but toward the bottom it sticks out.

a few people said i should have went with a smaller spacer in the rear...

I think it looks good. That taper isn't bad at all. Just take a look at my sig and be thankful for what you got to work with, lolol. Just think of every car that has posted in the pic forum that has to run rediculous camber to bring the top of the tire back under the fender and to be able to turn. (Not to mention the rediculous stretch too). This is by far the best result of a "fitment" thread I've seen on here. :goodjob::goodjob:

[CHADbee]

I think it looks good. That taper isn't bad at all. Just take a look at my sig and be thankful for what you got to work with, lolol. Just think of every car that has posted in the pic forum that has to run rediculous camber to bring the top of the tire back under the fender and to be able to turn. (Not to mention the rediculous stretch too). This is by far the best result of a "fitment" thread I've seen on here. :goodjob::goodjob:

Wow...thanks dude :cheers:

[S2KJD]

looks good imo :goodjob:

[Mrs. Shane94]

Wheres the POKE???????

ZMOG Ahhhh i found it :lmfao: el oh el
http://i66.photobucket.com/albums/h267/nicolec06/The%20Hatch/IMG_6348.jpg


Im just messing with ya the car looks good :goodjob:

[NAIZBST]

looks good

[shane94]

Wheres the POKE???????

ZMOG Ahhhh i found it :lmfao: el oh el
http://i66.photobucket.com/albums/h267/nicolec06/The%20Hatch/IMG_6348.jpg


Im just messing with ya the car looks good :goodjob:

lolz...

[dz N.U.T.Z.]

Wow the first blazer I have seen with great fitment!!!! NoT sunkin in like every other one I have seen in my life.

[dz N.U.T.Z.]

Now u take rig shots for me.....




















Jk....I'm really not tho....:)

[DB4LYFE ™]

Looks great! reps chad!

~DB4LYFE

[YokotaS13]

where is the-
I have no clue what flush is
option

you should haev put it so i can click it for you

[Jimmy B]

i had 2in spacers on my blazer.. wheels were off of a bmw m5.. fit jsut like yours, mabye 1/2 more sunken in..

your looks awsome like that.

[amandDA]

looks good to me...

[Z33_kid]

looks good

[DeeAOne]

that shit is RIGHT. dont change it man. it looks mean.

[down_shift]

looks good but is not really hella flush let alone poke.

[swimshark]

looks good for sure. need to get mine flush some day.

[PRO®]

flush.

[On_Her_Face]

:goodjob:

[CHADbee]

ha this thread is a few months old guys....i dont even own this vehicle anymore lol

[rsxappeal]

last pic is cool

[Franco Tirador]

that last one is so nice

[S13_Chody]

i like it!!

[JDMbabe]

i think it looks good i have a GMC Jimmy and it looks just like these blazers you know, and i thought about doing the same thing, but im getting a car now, so i wont have the funds to do it up.