PDA

View Full Version : spoiler whole plugs


COGCaviZ24
10-02-2009, 11:15 AM
anyone have good suggestions for plugging the wholes left over from removing a spoiler. just something temporary until I get a decklid without a spoiler

let me here your ideas or what you use(d)
slowinmidga
10-02-2009, 11:42 AM
most people use the little black caps to plug them. I got mine from the section with all the HELP stuff at autozone.
Sammich
10-02-2009, 11:43 AM
BLACK ELECTRICAL TAPE
COGCaviZ24
10-02-2009, 11:50 AM
BLACK ELECTRICAL TAPE

that's what's on it now. i want sonething that looks a little less tacky. i got some rubber inlet plugs from work but they are too big


anymore suggestions, i looked at some stuff at autozone but couldn't find anything that would soot my application. perhaps another location
148mph
10-02-2009, 12:27 PM
ya rivit that shit!!!!
u8myore0
10-02-2009, 01:17 PM
hey. i got mine from advanced and also got sealant as well to keep water from entering and causing rust. all of about 10 min to do. you just have to buy a few packs of the plugs and find ones that fit. i had to POUND them in but it wasnt that bad.

: )
hope that helps some
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs202.snc1/6934_534680349311_18002424_31730984_6196225_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs202.snc1/6934_534680354301_18002424_31730985_748914_n.jpg
deerock
10-02-2009, 02:05 PM
i got creative and found that the little plugs on my windshield wiper bolts fit right into the whole i plugged, but mine was the antenna hole. best bet probably is the plugs fro Advanced or autozone
COGCaviZ24
10-02-2009, 06:54 PM
hey. i got mine from advanced and also got sealant as well to keep water from entering and causing rust. all of about 10 min to do. you just have to buy a few packs of the plugs and find ones that fit. i had to POUND them in but it wasnt that bad.


thanks, although i dont have to worry about rust :)

i'm gonna hunt for some tomorrow
Me86Rob
10-02-2009, 07:09 PM
the whole what? and what was that about somethin that doesnt soot your needs? what does dirt have to do with any of this?
COGCaviZ24
10-03-2009, 07:33 AM
another internet english teacher :)
Kourt
10-03-2009, 01:21 PM
Home depot/Lowes sells some in the hardware department. They are in the section where the nuts and bolts are in the drawers, just look for the picture of them! They come in all kinds of sizes and clear or black.
ATLSRT8
10-03-2009, 01:28 PM
Do you want the whole plug or just half?

Or do want a HOLE plug?
91eflx
10-04-2009, 08:45 PM
Do you want the whole plug or just half?

Or do want a HOLE plug?

repz for funny shit
bdydrpdmazda
10-05-2009, 06:49 AM
BLACK ELECTRICAL TAPE
thats the worst idea ever

















use duct tape, and apply it from the inside
Me86Rob
10-05-2009, 07:59 AM
Do you want the whole plug or just half?

Or do want a HOLE plug?
repost
SiRed94
10-05-2009, 10:16 AM
I say weld up the holes and then sand them flat.
Andr3w
10-05-2009, 10:21 AM
When I was temporarily spoilerless I used white electrical tape. You couldn't tell unless you were right up on it. It rained quite a bit too and I did not have any leaking problems. I guess if it was a more long term thing I would have bought plugs.
civicturbo10
10-05-2009, 11:19 PM
use blue painters tape
xdavidscenex
10-21-2009, 02:18 AM
JB WELD
speedminded
10-21-2009, 01:13 PM
I say weld up the holes and then sand them flat.Let's see 1) Says Fiero all over his title 2) Said he doesn't have to worry about rust...
Ziptied
10-21-2009, 05:32 PM
go to a sign shop and get them to cut you little circles close to body color. thats what all the evo guys do.
speedminded
10-21-2009, 05:47 PM
go to a sign shop and get them to cut you little circles close to body color. thats what all the evo guys do.That's what I've always done...like 5 years ago and still have a hatch with the same vinyl circles on it. Most sign shops carry a 7 year 3M vinyl and it's available in just about any color.
SRCRX
11-06-2009, 09:11 AM
JB WELD

x2
dallasb84
11-06-2009, 02:04 PM
play doh