BOV on stock DSM

[alpine_aw11]

I just ordered a new FMIC setup to replace the janky ass shit my car came with, it's a basically stock 91 talon tsi. The piping has a BOV flange welded on already, am I going to have any problems with the car stalling or anything like that if I install a BOV? Apparently it has to be a "recirculating" BOV or something but if my car is going to run shitty I'll just cap the flange off.

[THEONE]

cant you just put your stock dsm bov on the new piping and hook up the hose that recirculates it back in to the intake pipe?

if i remeber right back when i had a talon ,you have to modify some other stuff to run a after market bov ,google it im sure you will find it quickly along with a list of free mods :D

[TSiFTW]

You can run an aftermarket but it has to be recirclated unless you have GM MAS and a MAF-T. Unless you plan on big boost just use the stock valve. It is better than most of the aftermarket ones anyways. I use my stock valve with 22-24 psi and never have a problem. It is crushed though. Stock should easily handle 18-20 with no modification. Remember though that 2g calves are junk, make sure it's a 1g.

[alpine_aw11]

All the stock stuff is gone unfortunately for the jank ass shit it has now. Honestly I just want to hear the sound of a good BOV lol but if it's pointless to use I won't do it.

And I'm assuming I'm supposed to recirculate it into the vacuum line connection after the MAF? That just has a screw in it right now and theres no BOV at all so it runs like shit, I was just going to go ahead and upgrade to an aftermarket one while I was redoing the entire setup.

[THEONE]

so you have no blow off valve? is your car an auto or a manual trans? if you could post a picture of your engine bay,im curious as to what your workin with.

[alpine_aw11]

Yes I have a BOV, idk why I even said that. It's a pos and it isn't recirculated, the car barely idles at all. My new FMIC setup has a 55mm flange welded on already for the BOV, if I want a HKS SSQV what do I have to do to make that fit? I wanted to go with the HKS because it's easy to use for a recirc setup.

[oldcorolla]

You can always check out the recirc valve at http://www.forgemotorsport.com/content.asp?inc=product&cat=0006&product=FMDVSPLTR. They have what is known as a "hybrid" recirc valve , you can use it as a 50/50 recirc/atmospheric a 100% recirc or a 100% atmospheric.