awd conversion

[sr20det.88]

i want to do an awd conversion on my b13 sentra?

any ideas?

[02SloWrx]

lol wut.

[sr20det.88]

awd conversion for a b13 sentra

[Revmaynard]

WUT LOL?

[browningboy7]

WUT LOL?

Times fucking twooooo

[SLOWR/T]

Buy a subie and swap the bodies. It would be faster to :D

[sr20det.88]

all wheel drive b13(90-94) nissan sentra

[browningboy7]

all wheel drive b13(90-94) nissan sentra

lol wut?!?!

[Revmaynard]

lol.....wut?

[j0nbunklah0m]

LOL QUEE?

[sr20det.88]

have you heard of a nissan pulsar gti-r or a nissan nx2000

[browningboy7]

http://cdn0.knowyourmeme.com/i/157/original/lolwutsp3.jpg

[Revmaynard]

Have you ever heard of a....E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430?

[sr20det.88]

Have you ever heard of a....E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430?

yea i have but what does that have to do with what i am asking

[Revmaynard]

E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 has to do with everything.

[browningboy7]

E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 has to do with everything.

http://ui25.gamespot.com/2360/notlolwutpearuw5_2.jpg

[sr20det.88]

E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 has to do with everything.

all i want to know is what would be the way to make an awd sentra

[Revmaynard]

It might be easier to make a...E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 AWD.

[browningboy7]

It might be easier to make a...E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 AWD.

http://knowyourmeme.com/i/155/original/pearmanity.jpg

[sr20det.88]

It might be easier to make a...E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 AWD.

ok i understand that but i want to make a sentra awd that is my current project car

[browningboy7]

ok i understand that but i want to make a sentra awd that is my current project car

http://mirror.servut.us/kuvat/meinung/lol_wut_pear_pink.jpg

[sr20det.88]

http://mirror.servut.us/kuvat/meinung/lol_wut_pear_pink.jpg

why do you keep saying that lol wut do you find something funny!!

[browningboy7]

why do you keep saying that lol wut do you find something funny!!

http://images.encyclopediadramatica.com/images/f/f6/Lolwutmate.jpg

[sr20det.88]

http://images.encyclopediadramatica.com/images/f/f6/Lolwutmate.jpg

ok dude wtf

[browningboy7]

ok dude wtf

http://img135.imageshack.us/img135/5927/lolwutaburgerdr5.jpg

[On_Her_Face]

i want to do an awd conversion on my b13 sentra?

any ideas?

I actually laughed out loud.

[sr20det.88]

I actually laughed out loud.

what the fuck is so funny?!?!?

[Bridged]

Why would u want AWD, more shit to break. I always have to carry extra transfer cases when I track my car or run it.

[browningboy7]

what the fuck is so funny?!?!?

http://img248.imageshack.us/img248/9853/lolwutpokeymanrh3.jpg

[sr20det.88]

Why would u want AWD, more shit to break. I always have to carry extra transfer cases when I track my car or run it.

because no body has done an awd sentra before or they have and i dont know about. thats why i want to do it

[browningboy7]

because no body has done an awd sentra before or they have and i dont know about. thats why i want to do it

http://jmsoul.files.wordpress.com/2007/07/divinelolwut.jpg

[sr20det.88]

http://jmsoul.files.wordpress.com/2007/07/divinelolwut.jpg

ok dude seriously you need to get a life!!!!!!

[browningboy7]

ok dude seriously you need to get a life!!!!!!

http://media.comicvine.com/uploads/0/5869/553082-lol_wut_pear_glasses_super.jpg

[blaknoize]

please understand, this is the GENERAL TECH section, please direct all questions above GENERAL TECH i.e. THIS POST to a more advanced technical support team.


kthnks

[sr20det.88]

please understand, this is the GENERAL TECH section, please direct all questions above GENERAL TECH i.e. THIS POST to a more advanced technical support team.


kthnks

dude do you think it is possible to take parts off a pulsar gti-r and use it on a b13 sentra?

[browningboy7]

dude do you think it is possible to take parts off a pulsar gti-r and use it on a b13 sentra?

http://420.thrashbarg.net/lol_que.jpg

[VickNotic]

all of this Bullshit is nothing to what the poster wants to see or hear, but I dont think the swap is possible unless you get yourself a pulsar or nx2000 however u spell it 8D

[sr20det.88]

http://420.thrashbarg.net/lol_que.jpg

wtf dude do you know anything about cars?

[sr20det.88]

all of this Bullshit is nothing to what the poster wants to see or hear, but I dont think the swap is possible unless you get yourself a pulsar or nx2000 however u spell it 8D

well if i get a pulsar or an nx but i would have to weld the subframe to the car

[browningboy7]

wtf dude do you know anything about cars?

http://img245.imageshack.us/img245/2273/lolwutbmw.jpg

[MachNU]

Forza 2

[jhadleyh]

fail thread is fail

[Jecht]

Those of you who are posting nonsense are morons. If you can't answer his question or at least steer him in the right direction, leave this board. Revmaynard, I thought better of you until this nonsense.

Anyways, AWD Sentras have been done before. But just like you were told in the other thread you asked in, it would require some cutting and welding to fit the driveshaft and rear differential. You'd probably have to use a fuel cell as well since the rear differential would probably be occupying the space previously taken by the gas tank. Yes, it can be done, but I don't think its worth the trouble. It would cost a large sum of money to pay a shop to do it, and would have a hefty learning curve should you try to do it yourself. There are many more ways to improve a Sentra and leave it FWD - the B13 chassis is plenty competent enough when it comes to motorsports. So why bother? If the fact that its FWD bothers you, sell it and buy another car.

If you are really considering doing this though, I would suggest finding a Sentra or Nissan forum and contacting one of the people who have done it before. That would be much more helpful than posting here, as you can see how well that turned out. :rolleyes:

[quickdodge®]

i want to do an awd conversion on my b13 sentra?

any ideas?

Hey dude, never mind those assholes. If you've been on forums long enough, you know that by now. If they have no idea or no open mind, they play the "5th grader" games with you to compensate for their lack of anything not JDM Honda.

As far as your question, here is what I remember from working on an AWD set up for my 1993 Sentra. I went over to the Pull-A-Part for most of the stuff.

2 left axles from 1992-1999 BMW E36 M3
front and rear shocks from 2003-2005 Dodge SRT-4 - make sure it had the air ride suspension
both front hub-centric disc brakes from 1992 - Now Subaru WRX
both rear water-cooled drum brakes from 1969 - 2002 LS1 F-Body (trans Am)
get all brakes lines from the LS1 F-body (front and rear)
AWD set up from 2002 - 2006 Acura RSX (these are sure-fit systems)
rear semi-quasimodo fast link solid axle from 2001-2005 Honda Civic EP3
electrical lines for AWD in cab operation from 1996 - 2002 MB CLK430 AWD

Everything is a straight bolt in ( whoever figured this out I don't know) except for the 2 left axles, front/rear shocks, hub-centric disc brakes, water-cooled drum brakes, the brake lines and the fast link rear axle.

Once you get those items bolted up to your car, I believe you'll be ready to tackle the AWD big boys. I never got around to finishing mine so I do hope you'll get yours running successfully.

And again, don't mind those mindless idiots that are talking shit. Look at my post count and rep count compared to theirs. Both are are well more than all of theirs combined so I know what I'm talking about, dude.

Good luck and keep us (or me) updated. Later, QD.

[Revmaynard]

Those of you who are posting nonsense are morons. If you can't answer his question or at least steer him in the right direction, leave this board. Revmaynard, I thought better of you until this nonsense.

Anyways, AWD Sentras have been done before. But just like you were told in the other thread you asked in, it would require some cutting and welding to fit the driveshaft and rear differential. You'd probably have to use a fuel cell as well since the rear differential would probably be occupying the space previously taken by the gas tank. Yes, it can be done, but I don't think its worth the trouble. It would cost a large sum of money to pay a shop to do it, and would have a hefty learning curve should you try to do it yourself. There are many more ways to improve a Sentra and leave it FWD - the B13 chassis is plenty competent enough when it comes to motorsports. So why bother? If the fact that its FWD bothers you, sell it and buy another car.

If you are really considering doing this though, I would suggest finding a Sentra or Nissan forum and contacting one of the people who have done it before. That would be much more helpful than posting here, as you can see how well that turned out. :rolleyes:



Eh, he kept posting asking how to do this in a KF thread that had nothing to do with it. I gave up after the first few comments though, wasn't worth my time. lol

[sr20det.88]

Those of you who are posting nonsense are morons. If you can't answer his question or at least steer him in the right direction, leave this board. Revmaynard, I thought better of you until this nonsense.

Anyways, AWD Sentras have been done before. But just like you were told in the other thread you asked in, it would require some cutting and welding to fit the driveshaft and rear differential. You'd probably have to use a fuel cell as well since the rear differential would probably be occupying the space previously taken by the gas tank. Yes, it can be done, but I don't think its worth the trouble. It would cost a large sum of money to pay a shop to do it, and would have a hefty learning curve should you try to do it yourself. There are many more ways to improve a Sentra and leave it FWD - the B13 chassis is plenty competent enough when it comes to motorsports. So why bother? If the fact that its FWD bothers you, sell it and buy another car.

If you are really considering doing this though, I would suggest finding a Sentra or Nissan forum and contacting one of the people who have done it before. That would be much more helpful than posting here, as you can see how well that turned out. :rolleyes:

but i tried to find some people on those forums and there is no one them who done it yet but i will give it another try

[MachNU]

absolute best answer in this thread is from QD...some serious thought in that! :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao:

[browningboy7]

Hey dude, never mind those assholes. If you've been on forums long enough, you know that by now. If they have no idea or no open mind, they play the "5th grader" games with you to compensate for their lack of anything not JDM Honda.

As far as your question, here is what I remember from working on an AWD set up for my 1993 Sentra. I went over to the Pull-A-Part for most of the stuff.

2 left axles from 1992-1999 BMW E36 M3
front and rear shocks from 2003-2005 Dodge SRT-4 - make sure it had the air ride suspension
both front hub-centric disc brakes from 1992 - Now Subaru WRX
both rear water-cooled drum brakes from 1969 - 2002 LS1 F-Body (trans Am)
get all brakes lines from the LS1 F-body (front and rear)
AWD set up from 2002 - 2006 Acura RSX (these are sure-fit systems)
rear semi-quasimodo fast link solid axle from 2001-2005 Honda Civic EP3
electrical lines for AWD in cab operation from 1996 - 2002 MB CLK430 AWD

Everything is a straight bolt in ( whoever figured this out I don't know) except for the 2 left axles, front/rear shocks, hub-centric disc brakes, water-cooled drum brakes, the brake lines and the fast link rear axle.

Once you get those items bolted up to your car, I believe you'll be ready to tackle the AWD big boys. I never got around to finishing mine so I do hope you'll get yours running successfully.

And again, don't mind those mindless idiots that are talking shit. Look at my post count and rep count compared to theirs. Both are are well more than all of theirs combined so I know what I'm talking about, dude.

Good luck and keep us (or me) updated. Later, QD.

Okay, Okay. I concede....This man knows what is up. :goodjob::goodjob:

[blaknoize]

well its gonna be VERY hard to find a Pulsar, I know what they are and would LOVE one in person, but they are JDM products.

I personally didnt know the NX2000 had an awd drivetrain

[sr20det.88]

well its gonna be VERY hard to find a Pulsar, I know what they are and would LOVE one in person, but they are JDM products.

I personally didnt know the NX2000 had an awd drivetrain

yea man nx2000 have an awd drivetrain

[Jecht]

but i tried to find some people on those forums and there is no one them who done it yet but i will give it another try

A quick google search pulled up this thread on another site:
http://www.nissanforums.com/b13-91-94-chassis/1915-awd-b13s-sunny-alttesa.html

Most of what they are talking about there is what you need to be looking into:

I believe that you can use the floor of a B13 without modifications until you get to the rear. The driveshaft doesn't need a lot of clearence since it only spins and doesn't travel up and down like a solid axle car.The rear suspension on the GTiR is assembled to a seperate bolt in subframe that you would need to fabricate strong mounts for.The Sentra and Pulsar/Sunny GTiR both share the same wheelbase and trackwidth so the parts can "easily" be made to fit if you have the requisite fabrication skills and an understanding of the basic systems.One final thing:you must use the exact same tires and gear ratios on all 4 wheels or you will grenade the transfer case.

Here is a good example of one that is already done:
http://www.youtube.com/watch?v=M8bAariYtBw

Oh and all NX2000s are FWD.

[SloWRX]

lol this thread is win!!!

[blaknoize]

Okay, Okay. I concede....This man knows what is up. :goodjob::goodjob:


since ur new, the lol wuts havent sunk in. STOP FLOATIN TOWARD THE DARKSIDE OF FAIL PLEASE

[sr20det.88]

A quick google search pulled up this thread on another site:
http://www.nissanforums.com/b13-91-94-chassis/1915-awd-b13s-sunny-alttesa.html

Most of what they are talking about there is what you need to be looking into:


Here is a good example of one that is already done:
http://www.youtube.com/watch?v=M8bAariYtBw

Oh and all NX2000s are FWD.

well i know i will be able to use the b13 chassis but so far i am not having any luck on finding a pulsar subframe but everything else i can find

[browningboy7]

since ur new, the lol wuts havent sunk in. STOP FLOATIN TOWARD THE DARKSIDE OF FAIL PLEASE

Since I am new? I have been here since 05' my other account got fucked in an update or something to that nature. Your large red font is awesome though bro, Keep up the good work. :rolleyes:

[sr20det.88]

alright ppl there is not much to say but i thought this was suppose to be a forum where ppl can converse about cars but i guess i was wrong!!!!! so disappointed

[On_Her_Face]

I doubt this will be finished anytime soon or done right. Good luck though.

[Lurker]

Swap in a 4G63 from and Evo or eclipse and get a custom drive shaft made. Hope you know a damn good welder.

[blaknoize]

Since I am new? I have been here since 05' my other account got fucked in an update or something to that nature. Your large red font is awesome though bro, Keep up the good work. :rolleyes:

didnt mean to quote u lol, i kno ur historical

[j0nbunklah0m]

absolute best answer in this thread is from QD...some serious thought in that! :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao:

x2 :lmfao:

[bdydrpdmazda]

good luck with your project

[Slomaro Z28]

alright ppl there is not much to say but i thought this was suppose to be a forum where ppl can converse about cars but i guess i was wrong!!!!! so disappointed

:lmfao: This site is 40% BS (whoreslounge), 40% Trash talk (killsforum), 10% NWS (RLD) 5% other and 5% car stuff.:lmfao:

[HalfBaked]

http://www.youtube.com/watch?v=V7Dw3cQB2aM

Seriously.

And NX2000s and NX1600s are FWD.

And sorry to break the news to you, but if you're too stupid to search the internet for the answers on how to make a b13 awd, you're too stupid to be able to actually do it.

[HalfBaked]

Also 1439/2000 has an AWD sentra and he posts on this forum.

Just private message him asking how he did it.

[1439/2000]

Also 1439/2000 has an AWD sentra and he posts on this forum.

Just private message him asking how he did it.

Just got a pm from him asking about my awd sentra. It's a Mitsubishi Galant VR-4. Not a sentra. Sorry. LOL

I did have a p11 G20 with an avanier swap that people thought was awd too though.

[Revmaynard]

Just got a pm from him asking about my awd sentra. It's a Mitsubishi Galant VR-4. Not a sentra. Sorry. LOL

I did have a p11 G20 with an avanier swap that people thought was awd too though.



LOLOL I was thinking that when I read his post.

[BABY J]

E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 has to do with everything.

:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao:: lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::l mfao:

[RUFFIAN]

i say do a JDM pulsar drivetrain swap:2cents:

[sr20det.88]

check this shit out awd conversion nissan nx2000

[url]http://www.sr20-forum.com/nx2000/15006-nx2000-awd-conversion.html

:lmfao: :yes: :cheers: :camera: :cussing: :cussing:

[sr20det.88]

Also 1439/2000 has an AWD sentra and he posts on this forum.

Just private message him asking how he did it.


dude your a fucking dumdass if you cant tell what car is what you fucking
:2up: :blah:

[BABY J]

E36 M3, SRT4, WRX, LS1 fbody, RSX, civic EP3, MB CLK430 has to do with everything.

:lmfao:

[imprtguy_94]

because no body has done an awd sentra before or they have and i dont know about. thats why i want to do it


if nobody has done it yet what does that tell you? idk just saying.. or you can always go dsm :D

[JJSPEC Racing]

Put an engine in the back and leave the engine in the front and you will have awd!! Seriously, you will have lots'ofab to do to make it happen.

[browningboy7]

lmao, Mannnnn. I really hoped he would go through with it. *rolls eyes*

[S.Brewer]

I got a AWD chevy on bags. Its 4wd and got a random mud tire that spins sideways in my bed. And my steering wheel is "driven" by power steering pump. :D

[d00d]

Just buy a 4wd wagovan lol.

[Motivation]

read the first page... don't feel like reading anymore. if there is already an answer, I apologize for this. When I had my b13 se-r, it was brought to my attention of doing a Pulsar gti-r swap in it. Was told for everything it was 3k-4k dollars. I was also told, that most of the swap was straight forward, just had a few little custom things for the drive shaft and the rear axle. If you are serious about doing this, and have the money for do so, call up a shop and get an estimate unless you have the know how. I am sure Dan at Batlground could give you an idea of how much it would cost for everything. It's not going to be cheap though.