HachiDori
09-23-2009, 06:39 PM
Lightly used, everything works. Replaced with a bigger unit. They sell online for $200.
Asking $150 cash.
Specs:
Key Features
2/1 Channel Operation
RMS Continuous Power (Watt) (at 12.0V 20-20kHz):
4 Ohm Stereo (0.08% THD) 50W x 2
2 Ohm Stereo (0.3% THD) 80W x 2
Bridged 4 Ohm (0.3% THD) 160W x 1
RMS Continuous Power (Watt) (at 14.4V 20-20kHz):
4 Ohm Stereo (0.08% THD) 80W x 2
2 Ohm Stereo (0.3% THD) 110W x 2
Bridged 4 Ohm (0.3% THD) 220W x 1
Top Mounted Blue LED Power/Status indicator
Independent adjustable crossovers: (15-400Hz) HP, 30-400Hz LP @12dB
DC-DC/PWM MOSFET Power Supply
4 Volt Input Capability
S/N Ratio: 100dBA
12dB Crossover
Input Mode selector switch
MOSFET Final Outputs
MOSFET Power Supply
Multimode
Dimensions: 9-7/8 x 2-3/8 x 8-1/4 (WxHxD)
http://i663.photobucket.com/albums/uu359/BeansIS/0923091926.jpg
Asking $150 cash.
Specs:
Key Features
2/1 Channel Operation
RMS Continuous Power (Watt) (at 12.0V 20-20kHz):
4 Ohm Stereo (0.08% THD) 50W x 2
2 Ohm Stereo (0.3% THD) 80W x 2
Bridged 4 Ohm (0.3% THD) 160W x 1
RMS Continuous Power (Watt) (at 14.4V 20-20kHz):
4 Ohm Stereo (0.08% THD) 80W x 2
2 Ohm Stereo (0.3% THD) 110W x 2
Bridged 4 Ohm (0.3% THD) 220W x 1
Top Mounted Blue LED Power/Status indicator
Independent adjustable crossovers: (15-400Hz) HP, 30-400Hz LP @12dB
DC-DC/PWM MOSFET Power Supply
4 Volt Input Capability
S/N Ratio: 100dBA
12dB Crossover
Input Mode selector switch
MOSFET Final Outputs
MOSFET Power Supply
Multimode
Dimensions: 9-7/8 x 2-3/8 x 8-1/4 (WxHxD)
http://i663.photobucket.com/albums/uu359/BeansIS/0923091926.jpg