loudap1
09-14-2009, 06:47 PM
ok well the motor is out of the car now. money talks so come buy this. its now taking up my already small workspace and need it gone asap.
The time has come for my car to undergo a new project so i must sell the current running gear. The motor and tranny are in great shape. no bad noises. no leaks of any kind. Its completely stock internally, stock clutch/flywheel. only after market items are an aem air intake, megan header, megan short shifter and blue samco silicone radiator hoses. i have the coil pack cover but i havent had it on the car in a while but it will be included (i'll post up more pics tomorrow with coil cover installed. i've owned the car for almost 5 years now and its just time to change it up. if im leaving anything out or anyone has any questions don't hesitate to ask. thanks in advance. hopefully this will find a new home in a cool project of someone's. I'd like to sell it as a swap.. but if the price is right i will consider separating (motor, harness, tranny, etc. but i will not breakdown the motor and acc.) driveshaft included as well. forgot i wont need it once the motor is gone.
the mileage is 155xxx
block code is: F20C1-1002891
vin is : JHMAP1140Yxxxxxxx
still available
throttle body -60
k&n intake -60
cat -50
o2 sensors -25 each
driveshaft -pending
starter 75
altenator(2x) 60
clutch/flywheel -sold
a/c compressor -70
samco rad hoses - 50
short throw shifter w/white teflon knob -75
motor mounts -120 for the pair or 70 each
trans cross member -make offer
map sensor -30
wiring harness - 175
ecu -150
tranny -300
slave cyl. -40
slave cyl. hose -15
clutch fork -30
power steering computer -85
possibly right hand drive steering rack -200
brand new in box t1r bump steer kit. $120.00obo
cusco front strut brace $125 obo
also complete soft top w/frame and motors ($500- Hartz stayfast cloth w/plastic window excellent condition no rips. baller upgrade from factory material), glove box/secret spot, roll hoops, top well, 2 sets of trunk carpet - make offer, momo wood grain wheel$ 85, most likely seats $400, ap1 taillights($80) , stock amber fender lights($20), oem ap1 wing ($75 bass boat silver), stock mirrors($100), jdm smoked/black "h" badges $20
mods i'll be taking pics saturday and posted them w/ prices, thanks.
all i can think of for now. anything else needed just ask.
http://photos-d-3.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1212837674805_1044661645_656683_2361672_n.jp g
http://photos-c-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214330992137_1044661645_662162_5797569_n.jp g
http://photos-a-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214330832133_1044661645_662160_7062505_n.jp g
http://photos-c-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214328672079_1044661645_662154_8046840_n.jp g
please excuse my dirty engine bay during my remodeling ha. thanks again for checking this out. any questions just pm or call
jeremy 404-783-8600
The time has come for my car to undergo a new project so i must sell the current running gear. The motor and tranny are in great shape. no bad noises. no leaks of any kind. Its completely stock internally, stock clutch/flywheel. only after market items are an aem air intake, megan header, megan short shifter and blue samco silicone radiator hoses. i have the coil pack cover but i havent had it on the car in a while but it will be included (i'll post up more pics tomorrow with coil cover installed. i've owned the car for almost 5 years now and its just time to change it up. if im leaving anything out or anyone has any questions don't hesitate to ask. thanks in advance. hopefully this will find a new home in a cool project of someone's. I'd like to sell it as a swap.. but if the price is right i will consider separating (motor, harness, tranny, etc. but i will not breakdown the motor and acc.) driveshaft included as well. forgot i wont need it once the motor is gone.
the mileage is 155xxx
block code is: F20C1-1002891
vin is : JHMAP1140Yxxxxxxx
still available
throttle body -60
k&n intake -60
cat -50
o2 sensors -25 each
driveshaft -pending
starter 75
altenator(2x) 60
clutch/flywheel -sold
a/c compressor -70
samco rad hoses - 50
short throw shifter w/white teflon knob -75
motor mounts -120 for the pair or 70 each
trans cross member -make offer
map sensor -30
wiring harness - 175
ecu -150
tranny -300
slave cyl. -40
slave cyl. hose -15
clutch fork -30
power steering computer -85
possibly right hand drive steering rack -200
brand new in box t1r bump steer kit. $120.00obo
cusco front strut brace $125 obo
also complete soft top w/frame and motors ($500- Hartz stayfast cloth w/plastic window excellent condition no rips. baller upgrade from factory material), glove box/secret spot, roll hoops, top well, 2 sets of trunk carpet - make offer, momo wood grain wheel$ 85, most likely seats $400, ap1 taillights($80) , stock amber fender lights($20), oem ap1 wing ($75 bass boat silver), stock mirrors($100), jdm smoked/black "h" badges $20
mods i'll be taking pics saturday and posted them w/ prices, thanks.
all i can think of for now. anything else needed just ask.
http://photos-d-3.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1212837674805_1044661645_656683_2361672_n.jp g
http://photos-c-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214330992137_1044661645_662162_5797569_n.jp g
http://photos-a-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214330832133_1044661645_662160_7062505_n.jp g
http://photos-c-0.ak.fbcdn.net/hphotos-ak-snc1/hs277.snc1/10418_1214328672079_1044661645_662154_8046840_n.jp g
please excuse my dirty engine bay during my remodeling ha. thanks again for checking this out. any questions just pm or call
jeremy 404-783-8600