PDA

View Full Version : ls ????



ej6kidd
09-14-2009, 11:50 AM
oil keeps getting into the coolant why could that be

thanks

ej6kidd
09-14-2009, 12:50 PM
any one

TSiFTW
09-14-2009, 12:51 PM
Head gasket

marcos713
09-14-2009, 01:08 PM
^ x2 definetly ur headgasket. Do a comp test

ej6kidd
09-14-2009, 01:53 PM
the motor isnt in the car the guy i bouhgt it from said he changed the headgasket and it still did it

ej6kidd
09-14-2009, 01:54 PM
said it may need to be resurfaced can that be the problem

teh_mugen18
09-14-2009, 01:58 PM
the motor isnt in the car the guy i bouhgt it from said he changed the headgasket and it still did it

then i think he did the job wrong, because that definately shouldnt be happening unless its coming from anywhere else in the engine. There could be a hairline fracture in the sleeve or somthing, which could seemingly leak oil into the coolant..? :thinking:

teh_mugen18
09-14-2009, 01:59 PM
said it may need to be resurfaced can that be the problem


It very well could be that also, if the deck of the block, and the headgasket, and the surface of the head are even slightly warped or mis-matched it could cause this too.

ej6kidd
09-14-2009, 02:08 PM
It very well could be that also, if the deck of the block, and the headgasket, and the surface of the head are even slightly warped or mis-matched it could cause this too.ight thanks i think my best bid would to get it resurfaced before i drop it in a car any body know of any good shops that can do that thanks and reps+++ for all

Barefoot
09-14-2009, 02:47 PM
ight thanks i think my best bid would to get it resurfaced before i drop it in a car any body know of any good shops that can do that thanks and reps+++ for allah pull that bitch apart surface the head check the deck with a straight edge. get a new head gasket.

D3UC3S
09-14-2009, 04:12 PM
ah pull that bitch apart surface the head check the deck with a straight edge. get a new head gasket.

x2 :goodjob:

ej6kidd
09-14-2009, 07:39 PM
ah pull that bitch apart surface the head check the deck with a straight edge. get a new head gasket.ight kool thanks ima try it 2 morrow reps+++

wrekonize
09-14-2009, 09:35 PM
head might be cracked