H22 with B-series trans aka H2B adapter plate EG CRX EJ

[spooled]

I have the adapter plate and flywheel spacer. I used the same setup to mount an F22 to a B-series transmission. The adapter and spacer can be used for either a H22 or F22 engine. I have one custom made for my setup and one other IA member. I have 2 extras I made for anyone interested.

Interested buyers if you have any questions please PM me.

You can also text me at 404-438-8839

$200 obo

Details:

High tensile strength steel construction
3/8" Thick
Includes hardware to mount the plate to the engine

http://i260.photobucket.com/albums/ii5/246-Garage/h-1.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/s-1.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/h-7.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/h-10.jpg

Thanks.

[PrOjEk_EJ]

H2b ftw gl

[integra82786]

interesting, didn't know it was possible. good stuff, glws

[draggbody]

what axles do you use for this??

[NoWAyItZTOMmY]

b series

[D3UC3S]

good deal right here!

[spooled]

what axles do you use for this??

You use b-series axles and 98+ prelude halfshaft. Some minor machining of the block required just like the other h2b kits to properply clear the driver side axle.

[Jenson]

Where did you find the M12x1.25x35 bolts????!!!!!????? Im still having trouble finding some for mine. I have all the other stuff needed to make a full kit if you need anything. I still dont understand why you used steel though....heaveeeyyy

[spooled]

Where did you find the M12x1.25x35 bolts????!!!!!????? Im still having trouble finding some for mine. I have all the other stuff needed to make a full kit if you need anything. I still dont understand why you used steel though....heaveeeyyy

If you need help with your kit PM ME PLEASE!!! After this post if you want to discuss my design I may consider it but in a PM format ONLY!!! With the laser I use, steel is much easier for me to machine to keep my costs low. If you use the correct grade/thickness of aluminum to make an aluminum adapter then your adapter would weigh about 1-2 lbs less than the steel adapters I make. This was not enough of a weight reduction for me to justify the huge additional cost.

Thanks.

[Jenson]

Ahhh, laser...gotcha. I just need help finding these dang bolts! Im not knockin your stuff, just was curious is all. Away to the pm's and another bump for you.

[Joppa_Smoot]

im kinda lost, it'll only work on eg and ef's? cause i have an ek and wanna go h2b...lmk fam

[spooled]

im kinda lost, it'll only work on eg and ef's? cause i have an ek and wanna go h2b...lmk fam

It will fit into an ek. It will fit in any chassis you can do a gsr swap. The ef chassis will need modification to the transmission mount up point and the crx needs modification to the drv side frame to fit.