Log in

View Full Version : KB MACH 1 VS MODDED BULLITT MUSTANG


coreytiburon
09-12-2009, 02:03 AM
http://www.youtube.com/watch?v=2JfeWFIwwzo
ME VS MY FRIENDS MACH 1
MY MODS ARE CAI,TUNE, EXHAUST, TIRES
HIS ARE KB2.1 15LBS, FULL EXHAUST
HE SPUN A LIL IN FIRST I HAD HIM TO 2ND GEAR THEN IT WAS OVER
(http://www.youtube.com/watch?v=2JfeWFIwwzo)
japan4racing
09-12-2009, 02:09 AM
nice! 15lbs on a stock mach longblock? what kinda power is the mach making?
Moseley
09-12-2009, 03:06 PM
Were you on 400 south last weekend around 10pm?

I ran into a newer black stang that gave me a good run. figured it was either spraying or a bolt on & tuned bullitt...
Josh...
09-12-2009, 05:03 PM
Were you on 400 south last weekend around 10pm?

I ran into a newer black stang that gave me a good run. figured it was either spraying or a bolt on & tuned bullitt...

It says "in texas" for the title of the video?
ueyedgr8tness
09-12-2009, 05:28 PM
damn nice little run there bro those open no traffic roads remind me of where i am at good safe runs.I say throw a 125shot and go chase him down bro :)
Moseley
09-12-2009, 09:16 PM
It says "in texas" for the title of the video?

Yeah I missed that... but it does look like a GA tag to me
MachNU
09-12-2009, 11:11 PM
If you pause the video at 19 secs and look at the reflection on the paint, its a dead give away to whos mach that is. I figured it had to be him...not many KB machs out there, and his is FAR from stock. on top of a stock mach block could not hold anything past about 8-10 on an eaton(great tune), let alone 15 on a KB. so what are you both doing all the way out in texas?
NevrNufTorq
09-12-2009, 11:13 PM
good vid:goodjob:
japan4racing
09-13-2009, 02:56 AM
on top of a stock mach block could not hold anything past about 8-10 on an eaton(great tune), let alone 15 on a KB. so what are you both doing all the way out in texas?

thats why i asked...15 psi on a stock mach block car would be blown up heaven...much past 450ish would be not healthy.
SmackedInATL
09-13-2009, 07:51 AM
Hmm I only know of 1 built Mach1 and it ain't on BFG DRs, just regular BFG street tires.
MachNU
09-13-2009, 08:35 AM
thats why i asked...15 psi on a stock mach block car would be blown up heaven...much past 450ish would be not healthy.

hell even at 450 is cutting it close. this one in the video though makes somewhere in the range of 560rwhp! :boobies:
blackbeast99
09-26-2009, 10:46 PM
Hmm I only know of 1 built Mach1 and it ain't on BFG DRs, just regular BFG street tires.

Correct, no DR's. Good friends of mine, we were just playing around.
blackbeast99
09-26-2009, 10:47 PM
hell even at 450 is cutting it close. this one in the video though makes somewhere in the range of 560rwhp! :boobies:


:thinking:

more like 350rwhp
blackbeast99
09-26-2009, 10:47 PM
Were you on 400 south last weekend around 10pm?

I ran into a newer black stang that gave me a good run. figured it was either spraying or a bolt on & tuned bullitt...


Which car where you in....?
02SloWrx
09-27-2009, 10:32 PM
That guy would racing anything according to this video:

http://www.youtube.com/watch?v=MFMuzHKg2Ps&NR=1
SicStang03
09-28-2009, 10:44 AM
hell even at 450 is cutting it close. this one in the video though makes somewhere in the range of 560rwhp! :boobies:



are you thinking that was Deon?
NewGen33
09-28-2009, 04:18 PM
This is not the high horsepower black Mach 1 I think some of you are thinking of.
MachNU
09-28-2009, 04:23 PM
:thinking:

more like 350rwhp

http://www.mach1registry.org/forums/member.php?u=5595 ;)
MachNU
09-28-2009, 04:24 PM
pause 20 secs in the video and you can see the red vinyl on the side! :lmao:

KB Mach 1's are very rare to come across, let alone a black one with a red vinyl!
QKJUICEDPONY
09-29-2009, 11:18 AM
That guy would racing anything according to this video:

http://www.youtube.com/watch?v=MFMuzHKg2Ps&NR=1


Read dudes name.......itsstock09

Didn't you know that itsstock.net RAN the streets!!!!!

:camera:
Nemesis
10-03-2009, 07:59 PM
You mind running my GT for fun?