PDA

View Full Version : Conquest BOV HELP!


-EnVus-
09-05-2009, 11:23 PM
My bro has a 87 Conquest and he just did a Blitz SS BOV install. The BOV isn't opening and we have tried everything we can think of. Can anyone help ???
Barefoot
09-06-2009, 01:09 AM
im sure you will get an answer here but i bet you will get a faster answer here http://www.importatlanta.com/forums/forumdisplay.php?f=32
RandomGuy
09-06-2009, 01:12 AM
what color is the car?
RandomGuy
09-06-2009, 01:13 AM
where do you have the vac line from teh bov hooked up to?

on the intake manifold along the side there are 3 vacuum nipples... plug it into any one of those and it should work...
-EnVus-
09-06-2009, 02:25 AM
what color is the car?


where do you have the vac line from teh bov hooked up to?

on the intake manifold along the side there are 3 vacuum nipples... plug it into any one of those and it should work...
It is red and its on the 3 nipple vacume like most say to use. Is it possible the spring in the BOV is to hard ? We pushed on it with a socket and it was really hard to push in.....
jdm>usdm
09-06-2009, 11:37 AM
I dont know much about a Blitz SS bov specifically, but in general, there is either an adjustment nut on top of the bov to reduce the spring tension, or you just open it up and find a softer spring to insert.

If youre positive that the vac lines are hooked up properly, then chances are the problem is in the spring tension.

There arent too many things that can go wrong with bov's
RandomGuy
09-06-2009, 12:43 PM
i got 2 red ones

they suck
BlkMKII
09-06-2009, 01:14 PM
i got 2 red ones

they suck

you want to sell a front valance?
lude66
09-09-2009, 04:38 PM
if you have a question regarding the bov install then contact DB at [email protected] . Honestly, these guys on here don't know what they are talking about
-EnVus-
09-09-2009, 08:34 PM
if you have a question regarding the bov install then contact DB at [email protected] . Honestly, these guys on here don't know what they are talking aboutlol
we got it fixed but thanks