TW:FS.B16A2 engine

[NosVette]

update 1000 takes the whole swap


Same engine as before but now it will come with a b17 ys1 cable tranny third does grind but what the heck its a 17 year old tranny.Has an itr intake manifold installed and will also come with the JG edelbrock header same CR did the test a week ago same as before.If you ever seen a charcoal grey DA with black group Ns with a red stripe run this was the swap that was in it.Reason of sale is because I got rear ended bout a month ago after I pulled on a 1.9L Gsr hatch lol and because I really wanna get my mx3 running bad so if your really interested hit me up at 6787896174 Bobby (or will trade for a KLZE engine with 200 on top) If you act fast you can still see the engine fire up and run before I pull it out.For you people that have been F@cked over before on IA and wont buy something unless you see it perform..No biggie im that way too


Okay heres my Old reliable b16a2 ran this engine for 6 months no problems what so ever when I say no problem I ment it didnt even give me a hicup.I was very careful when I did this swap every sensor was connected even added the OBD1 sensors that OBD2 dont have and deleted the OBD2 ones so basically its ready to plug up OBD1 engine.I did retain the OBD2 sensors so let me know if you want them.It never gave me a check engine light even though I guess one of my friends was trying to be funny and disconected my MAP sensor.So it came one one time and I was like,"Damn...WTF :thinking:" lol but fixed it right away.Did the compression test with my boy(Gboi :cheers:) yesterday.Very strong swap even though I had an ls tranny on it lol.Pulled on gsr's witness and victims are on IA too lol.Never met a b16 that pulled me ofcorse thiers one out their that could have..realed in a b20vtec that actually dyno'd 180whp he told me he dyno'd his car at mianstream and a gsr on a shitty spray cuz he kept sputtering(Gboi was a witness) and a lsvtec hatch that hes here too so were the drivers of the other vihicles but I dont wanna call them out ill let them say if they wanna bacause it is embarrassing getting pulled by a b16 when you have a 1.8L+

Engine: DOHC VTEC 1.6L 16 valve B16A2 block code 4302347

Miles:Around 140,000

Mods:JG edelbrock header and p73 type r intake thats it

Condition:just did oil change about 2 weeks ago with castrol synthetic oil, NGK g power plugs, and NGK wires.Never smoked w/p61 ecu..tried it w/ a chiped ecu and it smoked black once in a blue moon I guess because it ran so rich.Of course all vtec owners know about the cam seal leak.Mines barely leaks you can notice it like every month after you give it a quick spray of engine cleaner.

Notes:Its dark already so I cant take a pic of the block code or of the engine sitting outside the car but will guarante that I will post them up tomorrow as promised so dont delete please.So on the compression test on Cylinder 4-210 3-208 2-213 1-210 (will also have pics tomorrow of the comp. test of each cylinder)




pics of the engine on the car (its not on this car anymore its on the DA)

http://i153.photobucket.com/albums/s217/427TTA4/b16.jpg

http://i153.photobucket.com/albums/s217/427TTA4/b161.jpg

http://i153.photobucket.com/albums/s217/427TTA4/b162.jpg

http://i153.photobucket.com/albums/s217/427TTA4/b163.jpg

http://i153.photobucket.com/albums/s217/427TTA4/b164.jpg

pic of the block code

http://i153.photobucket.com/albums/s217/427TTA4/b169.jpg

pics of the compression

4
http://i153.photobucket.com/albums/s217/427TTA4/b168.jpg

3
http://i153.photobucket.com/albums/s217/427TTA4/b167.jpg

2
http://i153.photobucket.com/albums/s217/427TTA4/b166.jpg

1
http://i153.photobucket.com/albums/s217/427TTA4/b165.jpg

[REDEVO777]

should sell fast

[komakazic15]

got full swap?

[gerardojdm]

Bump for my boi, People would be surprised that it was only a B16 witha LS Tranny that just beat them. Reliable and no smoke at all.

[148mph]

would you take 750 cash in hand let me know

[ekcivic1991]

would you sell complete swap?

[NosVette]

Bump for my boi, People would be surprised that it was only a B16 witha LS Tranny that just beat them. Reliable and no smoke at all.

Preciate it :cheers:

[NosVette]

would you sell complete swap?

like they say everythings for sale depending on the price IDK shoot me an offer

[jdmda9]

this b16 has lots of potential and it runs great. bump just because his my cousin.

[Boostedek]

what the vin#

[lcortes32]

Bump for a Homie and yeah you would be surpriced its a B16 this MO'FO pulls like a damn GSR i can Vouch for this engine and How well its taken care of and how good it runs..!!

[NosVette]

what the vin#

Gotta call Hal johnsons salvage yard in griffin the Si that it came out of is in their yard ill get you the info as soon as I can

[Boostedek]

the vin#is on the longblock on top of the oil pan..

[NosVette]

the vin#is on the longblock on top of the oil pan..

Their you go 1HGEM1158YL035066

[148mph]

pics of motor outside of car...... wanna come get today

[Slow99coupe]

wow....bump for a damn good price

[NosVette]

ill have pics of it outside the car in a lil bit im working on my cuzins teg rite now ill check back in a lil bit...

Oh and I for got to tell you peeps it has obd1 jdm h22 injetors their rated at 345cc from factory stock all b-series are rated at 240cc so its a plus+ didnt want to put a bigger injector but my bro inlaw swaped his h out for a jdm and he used his obd2 ones.So those were the only obd1 injectors laying around

[Turbodude06]

Isn't that like really good compression for a B16? I thought they were usually around 180-190? Either way good luck with the sale:goodjob:

[eckok24]

bump for my boi

[148mph]

hey man let me know somthen.

[LSVTECEJ]

bump man great thread

[NosVette]

Isn't that like really good compression for a B16? I thought they were usually around 180-190? Either way good luck with the sale:goodjob:

Yeah thats what I though but I was really surprised.You know I guess that explains why it was a very stout b16.

[STRteg]

damn good stuff glws

[georgieboi]

oh yes i want this lol i was there when he checked the compression.and i have drove this car 100's of times dogged it out a lil which i dont think ricky knows about. lol runs great bump glws :goodjob:

[Romeo]

Man i want this.

[civic gsr]

honest seller glws man

[NosVette]

Bump....

[dirtragz]

will trade tool box for complete swap box retails for 6k look here http://www.importatlanta.com/forums/showthread.php?t=252846

[NosVette]

will trade tool box for complete swap box retails for 6k look here http://www.importatlanta.com/forums/showthread.php?t=252846

Im guessing it has no tools in it right? IDK so thats why im asking

[jdmboosted]

hey wuz up bro..just woundering if u would like to sell the tranny and if so how much...i need one bad as hell..and bump for a good lookin motor...glws

[JDMEG6]

bump for my boi faST ass b16!!!!

[Turbodude06]

Yeah thats what I though but I was really surprised.You know I guess that explains why it was a very stout b16.


Probably:goodjob:, Free bump.........

[georgieboi]

ttt

[NosVette]

Night Bump...

[lcortes32]

Bump for my Boi

[jdmda9]

Man I dont think you should sell this engine just keep it if you do sell it I highly doubt youll find another engine as in great condition and as well taken care of.You wont find compression like that unless its recently rebuilt.Just find you a block and build it and throw your head on it later with some cams and springs after all this engine pulls like or a lil more than a gsr especially that it had an ls tranny.People on IA just try to get the lowest priced engine as possible then they go on the buyer seller feed back talking bout they got riped off for buying a 100 dollar block that they thought worked good.Its like when they post quality parts they are alot more expensive than the 20 dollar springs in the next forum but would rather choose those over your 3 digit priced quality springs.just my :2cents:...

[1MP0RTL0V3R]

wish i had the money for this

[JEY$JDM]

Yo B! What up dude? Nice looking B16 bro... If I had the cash, Id get it.

You n G come out to Newnan this Friday for a meet man!

[NosVette]

you guys still hang out???Where at?

[NosVette]

Man I dont think you should sell this engine just keep it if you do sell it I highly doubt youll find another engine as in great condition and as well taken care of.You wont find compression like that unless its recently rebuilt.Just find you a block and build it and throw your head on it later with some cams and springs after all this engine pulls like or a lil more than a gsr especially that it had an ls tranny.People on IA just try to get the lowest priced engine as possible then they go on the buyer seller feed back talking bout they got riped off for buying a 100 dollar block that they thought worked good.Its like when they post quality parts they are alot more expensive than the 20 dollar springs in the next forum but would rather choose those over your 3 digit priced quality springs.just my :2cents:...


Yea guess so ill prob. just do that in the end I was trying to get a gsr engine but what for cause I can beat all you guy's gsr's ;) (not a burn)
If it doesnt sell within the next couple of days im going to keep it.

[NosVette]

UPDATE for sale again

[Black4DrEK]

I can Vouch for this Swap!

Pulls Very hard for a Stock B16...

but not hard enuff:ninja:


JK homie.. GL bro.. Aye I still got your compression tester in my car.. Hit me up

[georgieboi]

ttt

[wrekonize]

bump for bobby

[yunglaosta]

part out the tranny?

[NosVette]

part out the tranny?

how much are you offering and sure ill part it out

[Fast4DoorDC]

bump for bobby i witnessed this walk a gsr on spray

[Starrfire]

bump for really good stuff.

[DustnU]

Good motor and good price!!

[yunglaosta]

how much are you offering and sure ill part it out

i'm not sure lol, how much are u willing to start off for it?

[JDM4doooooor]

bump
for nice sale

[jrhatcheh2]

bump for ricky bobby

[jdm eg6]

bump

[NosVette]

i'm not sure lol, how much are u willing to start off for it?

just pm me a decent price I can work something out its either a yes or no subject lol

[Black4DrEK]

I called you tonight about the swap... NO answer hoe!

lol

[NosVette]

Bump

[xmike847x]

Bump for a clean b16 glws

[i4_garage]

210 acorss!!! chea

[redneckhatch]

bump

[NosVette]

somebody take this swap :crazy:

[tpike09]

awsome price for a full b series swap man glws!

[redneckhatch]

bump for good price