View Full Version : CEL 9 and 20
so i swapped over my b20 into my 90 civic hatch. Now im getting CEL numbers 9 and 20. The car was previously in my 88 hatch and it had no CEL at all. The car has been converted to OBDI. any ideas o fixing these problems?
EmminoDaGreat
09-02-2009, 03:58 PM
9 You need to check your dizzy or the wiring for it.
scttydb411
09-02-2009, 06:03 PM
9 cyp
20 eld
how was the obd1 conversion done? did you use a boomslang conversion harness or did you try and re-wire everything yourself?
9-try dizzy
20-try alternator
i could chip the ecu and disable the eld issue, but you need to fix the cyp.
Thanks for talks help guys! I got rid of the 20 it was the alternator. As for the 9 the conversion was done with a harness. I don't know what I should be looking for as the wiring goes. The wires that plug into the ecu look like there getting loose though not sure if that's the problem
ill be doing b20 vtec also hopefully soon
i cant find the solution to code 9
Barefoot
09-10-2009, 07:00 PM
i cant find the solution to code 9what have u done so far to diag. it.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.