PDA

View Full Version : Crank pulley


STRteg
08-29-2009, 12:50 PM
Anyone know where to rent or buy a crank pulley holder cant get the pulley off lmk thanks
punkr6
08-29-2009, 01:58 PM
it should just come off with a little tug. I haven't ever had a problem getting a honda/acura crank pully off. Try O'reillys and autozone . they rent tools free..
STRteg
08-29-2009, 05:33 PM
it should just come off with a little tug. I haven't ever had a problem getting a honda/acura crank pully off. Try O'reillys and autozone . they rent tools free..

wont come off put all my weight into it,autozone doesnt have it ill try O'reillys thanks for the input anyways
Barefoot
08-29-2009, 08:50 PM
it should just come off with a little tug. I haven't ever had a problem getting a honda/acura crank pully off.u crazy as hell. i havent had 1 yet that just came right off without working that bitch over. unless it was already taken off and put back on.



i got 1 u can use but u must pick up leave deposit (cost of tool) and drop off in 1 piece get your deposit back.
punkr6
08-29-2009, 10:53 PM
thats cause you working on rust buckets, and salt shakers...
Barefoot
08-30-2009, 12:10 AM
thats cause you working on rust buckets, and salt shakers...yah every day cars.
STRteg
08-30-2009, 03:16 AM
u crazy as hell. i havent had 1 yet that just came right off without working that bitch over. unless it was already taken off and put back on.



i got 1 u can use but u must pick up leave deposit (cost of tool) and drop off in 1 piece get your deposit back.

that would be great how much and where? i need it asap cash in hand lmk
Barefoot
08-30-2009, 03:29 AM
$77.84 here (http://maps.google.com/maps?hl=en&rlz=1B3GGGL_enUS332US332&resnum=0&um=1&ie=UTF-8&q=Quiktrip+8805+Tara+Blvd+Jonesboro,+GA+30236&fb=1&split=1&gl=us&cid=0,0,10644955276309008971&ei=TTiaSu2CCpuNtgfivd29BA&sa=X&oi=local_result&ct=image&resnum=1)
STRteg
08-30-2009, 01:35 PM
$77.84 here (http://maps.google.com/maps?hl=en&rlz=1B3GGGL_enUS332US332&resnum=0&um=1&ie=UTF-8&q=Quiktrip+8805+Tara+Blvd+Jonesboro,+GA+30236&fb=1&split=1&gl=us&cid=0,0,10644955276309008971&ei=TTiaSu2CCpuNtgfivd29BA&sa=X&oi=local_result&ct=image&resnum=1)

you have a pm
Barefoot
08-30-2009, 04:22 PM
you have a pmlmk if u have any issues with it.
STRteg
08-30-2009, 05:10 PM
lmk if u have any issues with it.

Alright will do thanks again
Barefoot
08-30-2009, 05:41 PM
np
98blackcivic
09-01-2009, 10:21 AM
is this for my car?
and is that you dustin?
fuk the crank pulley bolt...
Tech5
09-01-2009, 02:55 PM
it should just come off with a little tug. I haven't ever had a problem getting a honda/acura crank pully off. Try O'reillys and autozone . they rent tools free..

150psi air and a 700ft lb impact should take it off but I have seen many of them.. More accords then civics/integras though... But yes it happens that is why this tool was made.
Autozone nor O Reillys do NOT rent nor sell this tool

Snap on, Mac, Matco


they are around 80 bucks each one for the larger size accords to the smaller size civics integras I have both
STRteg
09-01-2009, 09:21 PM
is this for my car?
and is that you dustin?
fuk the crank pulley bolt...

who are you??
redciv1
09-02-2009, 02:19 PM
Got mine off of ebay for $25 or so. I know it was no where near Barefoot, we didn't even use a impact gun either. Actually I had to take off a second time and it worked great. GL