PDA

View Full Version : help! runn p75 on a b20 vtec??


b20vtecrr
08-29-2009, 12:57 AM
some1 gimme some input on whether or not runn a p75 with a vtec controller would work>>???????:thinking: :thinking: :thinking: :screwy: i dont have the $$$ yet to convert to obd1 so i need some help with this.. p72 and p73 ecus BOTH run my car like shit like jerking and unsmooth idling so i need some assistance FARVA
Da_unknown
08-29-2009, 01:03 AM
that p75 its gonna do it either...
Barefoot
08-29-2009, 01:33 AM
i never tried it but i doubt it will work.
B3AST
08-29-2009, 09:16 PM
just get a chipped p28
scttydb411
08-29-2009, 11:16 PM
so you're going to spend $ on an afc, install, and tuning when you could've spent that converting it to obd1 for about the same price?
Barefoot
08-30-2009, 12:14 AM
so you're going to spend $ on an afc, install, and tuning when you could've spent that converting it to obd1 for about the same price?this is IA people arent that smart.
b20vtecrr
08-30-2009, 09:50 PM
nah man havent bought anything jus runn p75 no vtec : ( i guess i will tune on a chipped p28 i found obd2 to 1 skunk 2 harness on wek sos for 143 thats cheap so all i haf to do is fin some1 around shitty chattanooga to tune it hahahhhhahaha
Da_unknown
08-30-2009, 10:35 PM
wow..thats expensive..
http://www.boomslang.us/obd2to1.htm
scttydb411
08-31-2009, 09:14 AM
get the boomslang...only seen 1 failure in the 1000's of hondas i've tuned. the s2 and jdmshit harnesses i've seen high failure rates.

I tune quite a few folks from chatt. feel free to give me a call if u have any questions. 678-614-3596.
b20vtecrr
09-05-2009, 08:57 PM
how much would u charge bro i am gonna go ahead and buy a p28 and a skunk2 obd1 conversion harness pm me and let me know man shes runn ok but it needs a tune and i still need to buy parts for there are some ls parts on the b16 head im sure its not good for it
Barefoot
09-05-2009, 09:22 PM
how much would u charge bro i am gonna go ahead and buy a p28 and a skunk2 obd1 conversion harness pm me and let me know man shes runn ok but it needs a tune and i still need to buy parts for there are some ls parts on the b16 head im sure its not good for ittake the advice get the boomslang. everybody aint saying boomslang for no reason.
scttydb411
09-06-2009, 04:42 PM
how much would u charge bro i am gonna go ahead and buy a p28 and a skunk2 obd1 conversion harness pm me and let me know man shes runn ok but it needs a tune and i still need to buy parts for there are some ls parts on the b16 head im sure its not good for it

pm sent.
TommyD1919
09-06-2009, 08:00 PM
I've seen many of "vtec" swaps or "vtec" head swap with a non-vtec ecu and some kind of vtec contoller... Don't think I have ever seen a happy one though.. VTEC swap or head should always be done with a vtec ecu.. Chipped P28 makes them happy.
chrisdohck
09-08-2009, 08:12 PM
yes sir and a tune from scott will make u :D the hole ride home
I've seen many of "vtec" swaps or "vtec" head swap with a non-vtec ecu and some kind of vtec contoller... Don't think I have ever seen a happy one though.. VTEC swap or head should always be done with a vtec ecu.. Chipped P28 makes them happy.