WalkS
08-28-2009, 02:21 PM
I have a brand new, never used Synapse Turbo Kit that I bought awhile back.. I thought I'd post it up and see if I can find a new home for this stuff.
It's a Synapse A/C Ramhorn .82 GT3076R kit capable of producing ~500whp or so
Stainless steel ramhorn manifold:
-Lifetime warranty to the original against cracking
-Tig welded by hand
-Completely backpurged
-Power steering compatible
-Ported for maximum flow to wastegate and turbo
3 inch stainless steel downpipe
-Mandral Bent
-Tig welded by hand
-Flex section
2.5 inch aluminum charge piping powder coated black
-Black powercoated standard other colors chioces available
-Bead rolled to prevent couplers blowing off
-Includes all necessary 4 ply couplers, t bolts
Wastegate dumptube
Tial 38mm wastegate - Black
Tial 50mm blow off valve - Black
Oil lines with necessary fittings, including oil pan bung
Garrett core intercooler 24x6.3x3 (475hp core)
-24 x 6.3 x 3 inch Garrett core
-Bar and plate construction
All required nuts bolts and various hardward is included.
http://c4.ac-images.myspacecdn.com/images02/73/l_7d10e8a798db4df8bfb3a5515fe54b97.jpg
http://www.synapseturbo.com/gallery/cache/1043c5b3a941ab42a945515ed1871b9e39233c74_400.jpg
Still sitting in boxes
http://img43.imageshack.us/img43/5931/photo5uxj.jpg
Kit goes for ~$4100 new, looking to get $4k or best offer (negotiable). no lowballs please.
Other parts I have that can be added to the kit for extra (most of these parts are sitting at my local shop):
-GSR B18C1 block (needs sleeve job)
-Eagle GSR Rods (used)
-84mm Wiseco 9.0:1 pistons (new)
-Precision 1000cc injectors with resistor box (used)
-Full-Race Pro Street Traction Bar (Currently on car)
-OBD1 ECU with jumper harness
-Tapped valve cover
http://www.synapseturbo.com/gallery/cache/0b10c51c122c06ce7e1b111adabd9075229a1663_800.jpg
Contact
email: [email protected]
cell: 478-918-3560
Location: 31088
It's a Synapse A/C Ramhorn .82 GT3076R kit capable of producing ~500whp or so
Stainless steel ramhorn manifold:
-Lifetime warranty to the original against cracking
-Tig welded by hand
-Completely backpurged
-Power steering compatible
-Ported for maximum flow to wastegate and turbo
3 inch stainless steel downpipe
-Mandral Bent
-Tig welded by hand
-Flex section
2.5 inch aluminum charge piping powder coated black
-Black powercoated standard other colors chioces available
-Bead rolled to prevent couplers blowing off
-Includes all necessary 4 ply couplers, t bolts
Wastegate dumptube
Tial 38mm wastegate - Black
Tial 50mm blow off valve - Black
Oil lines with necessary fittings, including oil pan bung
Garrett core intercooler 24x6.3x3 (475hp core)
-24 x 6.3 x 3 inch Garrett core
-Bar and plate construction
All required nuts bolts and various hardward is included.
http://c4.ac-images.myspacecdn.com/images02/73/l_7d10e8a798db4df8bfb3a5515fe54b97.jpg
http://www.synapseturbo.com/gallery/cache/1043c5b3a941ab42a945515ed1871b9e39233c74_400.jpg
Still sitting in boxes
http://img43.imageshack.us/img43/5931/photo5uxj.jpg
Kit goes for ~$4100 new, looking to get $4k or best offer (negotiable). no lowballs please.
Other parts I have that can be added to the kit for extra (most of these parts are sitting at my local shop):
-GSR B18C1 block (needs sleeve job)
-Eagle GSR Rods (used)
-84mm Wiseco 9.0:1 pistons (new)
-Precision 1000cc injectors with resistor box (used)
-Full-Race Pro Street Traction Bar (Currently on car)
-OBD1 ECU with jumper harness
-Tapped valve cover
http://www.synapseturbo.com/gallery/cache/0b10c51c122c06ce7e1b111adabd9075229a1663_800.jpg
Contact
email: [email protected]
cell: 478-918-3560
Location: 31088